1. LCWS13, 11-15 November 2013 At the University of Tokyo W.–D. Möller Status of the TTF3 RF Power Coupler

2. Status of the TTF3 RF power coupler 2 2013, Nov. 11 th, Tokyo, Japan W.-D. Möller, DESY, Hamburg overview First TTF3 specification for TESLA Development history Operation experience Developments and improvements for XFEL  Conditioning time  Bellow supports  RF contacts  Other improvements  Capacitor replacement proposal What has to be improved further

3. Status of the TTF3 RF power coupler 3 2013, Nov. 11 th, Tokyo, Japan W.-D. Möller, DESY, Hamburg TESLA specification frequency1.3 GHz operation pulsed: 500 µsec risetime, 800 µsec flat top with beam two windows safe operation clean cavity assembly for high gradients 2 K heat load0.06 W 4 K heat load0.5 W 70 K heat load6 W isolated inner conductorbias voltage, suppressing multipacting diagnosticsufficient for safe operation and monitoring

4. Status of the TTF3 RF power coupler 4 2013, Nov. 11 th, Tokyo, Japan W.-D. Möller, DESY, Hamburg TESLA specification TTF TESLA 9-cell / upgrade TESLA superstructu re / upgrade TESLA X-FEL Supplement peak power + control margin (27%) 250 kW 250 kW / 500 kW 555 kW / 1110 kW 150 kW repetition rate10 Hz5 Hz 10 Hz average power3.2 kW3.2 / 6.4 kW3.6 / 7.2 kW1.9 kW coupling (Qext) adjustable ( 10 6 - 10 7 ) fix ( 3*10 6 ) fix ( 2.5*10 6 ) adjustable ( 4.6*10 6 ) cavity position during cool down flexible (15 mm longitudinal ) fix point (4.5 mm longitudinal) fix point (4.5 mm longitudinal) fix point (4.5 mm longitudinal)

5. Status of the TTF3 RF power coupler 5 2013, Nov. 11 th, Tokyo, Japan W.-D. Möller, DESY, Hamburg Development history FermilabTTF2TTF3 cold windowconicalcylindrical warm windowwave guide cylindrical BiasnoyesYes fabricated1620>100

6. Status of the TTF3 RF power coupler 6 2013, Nov. 11 th, Tokyo, Japan W.-D. Möller, DESY, Hamburg Operation experience 32 TTF3 couplers are in operation in FLASH  More than 1.5 Mio coupler x hours of operation  Forward power varies: 150 to 300 kW, 2-10 Hz, 1.3ms Long run test of EP cavities in the horizontal cryostat  This test includes all auxiliaries like power coupler, HOM coupler, tuner…  Gradient: 35 MV/m  Max forward power: 600 kW  RF on time 2400 hs, at 600 kW 1100 hs  No breakdowns in the coupler High gradient test with beam (in module ACC1)  Gradient: 35 MV/m  Gradient calibration with beam

7. Status of the TTF3 RF power coupler 7 2013, Nov. 11 th, Tokyo, Japan W.-D. Möller, DESY, Hamburg Developments and improvements for XFEL Conditioning time Conditioning time was improved: all parts are stored under dry Nitrogen warm side of cold window is now always under dry Nitrogen time on air during assembly is minimized by using an dry nitrogen flow during assembly to the module On test stand 1-2 days On module 3-4 days Sealing cap for the cold window

8. Status of the TTF3 RF power coupler 8 2013, Nov. 11 th, Tokyo, Japan W.-D. Möller, DESY, Hamburg Developments and improvements for XFEL Bellow supports When the bellows are plastic deformed a lateral deformation takes place Module is transported from Saclay to DESY by truck, this adds load to the bellows Two supports were added to the cold and warm bellow

9. Status of the TTF3 RF power coupler 9 2013, Nov. 11 th, Tokyo, Japan W.-D. Möller, DESY, Hamburg Developments and improvements for XFEL Other improvements Less welds and parts Motor driver for Qext tuning Thermal connection improved  new 4K shield design  better contact between shields and coupler flange  doubled the copper braids Wave guide box brazed from copper plated SS, not soldered

10. Status of the TTF3 RF power coupler 10 2013, Nov. 11 th, Tokyo, Japan W.-D. Möller, DESY, Hamburg Developments and improvements for XFEL RF contacts The RF contacts have to be very precisely machined and carefully assembled, otherwise they tend to spark New development was stopped Soft copper shims are used for better contact

11. Status of the TTF3 RF power coupler 11 2013, Nov. 11 th, Tokyo, Japan W.-D. Möller, DESY, Hamburg Developments and improvements for XFEL Capacitor replacement proposal Proposal from SLAC:  Replacement of capacitor by a soft copper ring to improve the RF contact  It is tested and used on some couplers  Decision for the XFEL will be taken soon (experience in FLASH show that the bias option was never needed.

12. Status of the TTF3 RF power coupler 12 2013, Nov. 11 th, Tokyo, Japan W.-D. Möller, DESY, Hamburg What has to be improved further RF contact at WG box still not satisfactory Antenna alignment depends from bellow straightness and has a big influence on Qext

13. Status of the TTF3 RF power coupler 13 2013, Nov. 11 th, Tokyo, Japan W.-D. Möller, DESY, Hamburg Clip board – copy and paste Headline first level  second level  third level HeadlineText Text Keyword 1. Keyword 2. Keyword Keyword Result Headline  Text Result Headline Text Result Headline Text