1. Nearmiss Presentation
Wel Come to
Nearmiss Presentation

2. Contents : Nearmiss Awareness Accident Responsibilities of Individual
Reporting
4/25/2017

3. IS IT OK ?
4/25/2017

4. Hazards
Surrounding us
4/25/2017

5. Nearmiss
4/25/2017

6. What is Nearmiss ?
Nearmiss : An undesired event which could have potential to result in to an injury, loss of life, property damage or environmental damage
An incident which under slightly different circumstances could have resulted in harm/ injury to people or loss to property / damage to environment
4/25/2017

7. Some examples of nearmiss incidents...
If a person walking in a ware house and he felled due to cable in his way but he didn’t have any injury.
A vehicle has been stuck with other but no major damage occurred.
While working on height a spanner slipped from hand and fell down on a head of person, due helmet on head nothing happened to him.
A lifted load felled down on the deck due to breaking of sling but nothing happened to anyone.
While tightening a bolt your hand slips from spanner due to wet hand and spanner felt on floor very close to a person who is assisting you.
4/25/2017

8. Accident
4/25/2017

9. What are the factors responsible to cause an Accident ?
What is an Accident ?
Accident : An undesired event which could leads to an injury, loss of life or property damage.
What are the factors responsible to cause an Accident ?
Unsafe Conditions
Unsafe Acts
4/25/2017

10. Unsafe Acts... A person driving two wheeler without helmet
A person working with electrical equipment
without Shock proof rubber hand gloves
A person is wrapping plastic tape instead of
insulating tape on wire joint
A person doing grinding work without eye
protection
A person using slings without colour code
4/25/2017

11. Unsafe Conditions... Slippery Surface
A grinding machine without wheel guard
A vehicle without breaks
Open electrical joint
Congested area
Wire rope in poor condition
work place with poor illumination
broken ladder
4/25/2017

12. If we are able to avoid Unsafe Acts
and
Unsafe Conditions
then we
can avoid the accidents.
4/25/2017

13. Unsafe Acts and Unsafe Conditions
How we can avoid
Unsafe Acts and Unsafe Conditions
By Accessing the Hazards associated and the Risk involved and by taking precautionary measures
4/25/2017

14. How we can Access the HAZARDS and RISKS
By Accessing / reviewing the Activity to be done
HOW ?
Review the each steps of procedure
Review the tools / equipment to be used – what type of hazards / risks are associated with them
What steps we can take to avoid / reduce the impacts of Hazards / risks
4/25/2017

15. HOW ? What kind of PPE required to reduce the
impacts of Hazards / risks
Carry out the inspection of equipment / tools
prior to use – any deficiency observed shall be
reported immediately and take corrective actions.
4/25/2017

16. Guiding factors in selection of jobs for JSA
Job that has repeatedly produced accident
Job that has produced disabling injury
Jobs have the potential for severe injury
New jobs created by changes in equipment
or in process
4/25/2017

17. Example of ‘Critical Operations’ that require a JSA
Heavy lifts from/to supply vessel
Laying down/picking-up of drill pipe
Transfer of Hydrocarbons from/to supply vessel (inclusive of diesel/ Fuel)
Anchor handling
Use of unusual/unfamiliar equipment or procedures
4/25/2017

18. Example of Routine Operations’ that require a JSA
High noise activities (grinding, pressure washing etc.)
Handling and use of hazardous chemicals
Where a specific task involves a team of people
Working with radioactive substances or explosives
4/25/2017

19. JSA Forms - 3 Basic Elements
Job
Steps
Safe Work
Controls
Hazards
4/25/2017

20. S A T STOP and INVEST a MOMENT to:
Self
Assessment
Technique
is to engage your mind before your hands
Before you start the job,
STOP and INVEST a MOMENT to:
Spot the hazard
Assess the risk
Think, make changes
4/25/2017

21. Supervisors Enforce hazard Identification system
Conduct 'One on One' Inductions - new crews & ongoing evaluation
Ensure full compliance & maintain minimum HSE stds & expectations.
Continuously evaluate the use of JSA / Toolbax meeting and feedback
Accountable for team performance
SUPERVISE, Supervise and Supervise
4/25/2017

22. Supervisors expected to promote : STOP WORK policy and “no short cut”
a robust SH&E culture
the Self Risk Assessment Technique
team 'Environmental' awareness
participation in HAZARD Identification Tours
4/25/2017

23. All Personnel Adapt to Hazard identification system
Actively participate in all programs
Maintain a high “E” (environment) focus
Use SAT at all times and take 'No shortcuts'
Maintain high housekeeping standards
Demonstrate and exercise DUTY of CARE
(self responsibility & accountability)
4/25/2017

24. Our Expectations Inspect YOUR worksite and identify
falling object hazards
Is all equipment included in your
inspection programmes?
Are all your inspections completed?
Remove all unnecessary equipment
that is stored at height
Ensure equipment used at height is secured
4/25/2017

25. STOP THE JOB If you think the work is unsafe ….  Look after yourself
Falling Objects
If you think the
work is unsafe ….
STOP
THE JOB
 Look after yourself
 Look after the people around you
4/25/2017

26. Thank You
4/25/2017