1. Q PLC 簡介 伺服控制系統 全弘科技有限公司 張朝棋

2. Q PLC 基本架構

3. Q CPU 比較表

4. CPU 模組 LED 燈號

5. CPU 模組開關設定

6. 三菱整體網路架構

7. 多重 CPU 架構

8. Q 系列整合系統

9. 二重化系統架構

10. Q CPU 各記憶區塊

11. 記憶卡規格

12. 輸出繼電器 Y

13. 內部輔助繼電器 M

14. 特殊暫存器 SD

15. 編輯軟體簡介

16. MELSERVO-J2S

17. Servo Setup

18. MR-J2S-□A

19. Motor Model Configurator

20. Motor Specification

21. Motor Torque Curve

22. MR-J2S-□A Driver Model

23. MR-J2S-□A Driver Specifiction

24. MR-J2S-□A Position Control Wiring

25. MR-J2S-□A Speed Control Wiring

26. MR-J2S-□A Torque Control Wiring

27. MR-J2S-□A Position Control Wiring(1)

28. MR-J2S-□A Encode Wiring(2)

29. MR-J2S-□A CN3/CN4 Wiring

30. MR-J2S-□B

31. MR-J2S-□B Driver Specification

32. MR-J2S-□B Wiring

33. MR-J2S-□B CN3/CN4 Wiring

34. MR-J2S-□CP

35. MR-J2S-□CP Driver Specifiction

36. MR-J2S-□CP Command

37. MR-J2S-□CP-S084

38. MR-J2S-□CP Wiring

39. Features of QD75(1) (1) Availability of one, two, and four axis modules (2) Wide variety of positioning control functions (3) Quick startup (4) SSCNET makes the connection to the servo amplifier possible (5) Easy application to the absolute position system (6) Control can be realized with the mechanical system input

40. Features of QD75(2) (7) Easy maintenance (8) Support of intelligent function module dedicated instructions (9) Setups, monitoring, and testing through GX Configurator-QP

41. Purpose and applications of positioning control(1)

42. Purpose and applications of positioning control(2)

43. Purpose and applications of positioning control(3)

44. Positioning system using QD75

45. Communicating signals between QD75 and each module

46. List of input/output signals with PLC CPU

47. Signal layout for external device connection connector

48. Interface internal circuit

49. The LED display indicates the following operation statuses of the QD75 and axes.

50. Parameters and data required for control(1)

51. Parameters and data required for control(2)

52. Setting items for positioning parameters(1)

53. Setting items for positioning parameters(2)

54. Setting items for OPR parameters

55. Setting items for servo parameters(1)

56. Setting items for servo parameters(2)

57. Setting items for positioning data

58. Monitoring the system

59. Monitoring the axis operation state(1 )

60. Monitoring the axis operation state(2)

61. Controlling the system data

62. Controlling the operation(1)

63. Controlling the operation(2)

64. Controlling the operation(3)

65. positioning data

66. positioning data 1~5

67. Dedic ated instructions PSTRT(1)

68. Dedic ated instructions PSTRT(2)

69. Dedic ated instructions PFWRT

70. Dedic ated instructions PINIT