1. GA COG RAKE BAR SCREEN

2. GA Cog Rake Bar Screen Channel width 1’-0” to 12’-0” Side frames 3/8” x 25” Screen angle 60º to 85º Spacing 1/4” and up Max water level 9’-0”

3. GA Cog Rake Cycle

4. Cog Rake Bar Screen Replaceable rollers and bushings in hardened carbon steel or non-metallic Pins are 5/8” (GA, GB) or 3/4” (GBD) diameter bolts with locknut Cog wheel is an involute gear, pitch diameter of 10.822” (GA,GB) in hardened carbon steel, nickel plated or non- metallic GBD pitch diameter of 13.065” carbon steel only Steel gears for hardened GA & GB models are split for easy replacement NON-LUBE SYSTEM

5. Cog Rake Bar Screen Patented drive and guide roller system Lubrication not required Easily Replaceable Stainless steel pins

6. Cog Rake Bar Screen Patented submersible drive system System is based on Boyle’s Law Rake arms are used as the air chamber Rugged polypropylene construction Excellent heat dissipation Easily removable Automatic condensate drain