3. A:B: Sill PlatesGirders #1 Heavy beams that support the inner ends of the floor joists are called? C:D: Subflooringbridging

4. Girders

5. A:B: poststud #2 what is a vertical upright framing member that goes from the bottom plate to the top plate? C:D: joistvertex

6. stud

7. A:B: underlaymentrafters #3 The subfloor is nailed to the________? C:D: joistfoundation

8. Joist

9. A: B: Framing SquareTry square #4 Tool used for laying out wall plates. C:D: hammerCircular saw

10. Framing Square

11. A:B: Benchmarkseat #5 A recess in a foundation wall to support a girder is called a _______________ C:D: casementpocket

13. A:B: masoncarpenter #6 It is usually the responsibility of the _______ to lay out building lines C:D: architectFoundation inspector

14. carpenter

15. A:B: Balloon framePlatform frame #7 The most widely used framing method in residential construction is C:D: Post and beam Random plank

16. Platform frame

17. A:B: Floor joistsSill plate #8 Anchor bolts are used to attach_________ to the foundation. C:D: girderA,B, and C

18. Sill plate

19. A:B: 16” O.C.18”O.C. In conventional framing floor joists are usually placed ________ C:D: Prior to the GirderBelow the sill plate

20. 16”O.C.

21. A:B: Crown downCrown up #10 Joists are installed with the C:D: Lap-spiked together over the sill plate A and B

22. Crown up

23. A:B: Sole plateTop plate #11 The bottom horizontal member of a wall frame is called the______? C:D: Double plateSill plate

24. Sole plate or bottom plate

25. A:B: bracestrimmers #12 Shortened studs that carry the weight of the header are called_________ ? C:D: CrippleCorner posts

26. trimmers

27. A:B: Vary their spacing between 8” and 10” Mark their location on the sill plate. #13 When laying out studs__________. C:D: Keep the studs directly in line with joists below. A.B. And C.

28. Keep them directly in line with the joists below

29. A:B: Speed squarekitchen #14 Rafter tables come in booklet form and are also stamped on the ____________. C:D: Framing square Floor plan

30. Framing square

31. A:B: 6 and 126 and 14 #15 laying out and stepping off a hip rafter with a 6”slope you would hold ____________ on the framing square. C:D: 6 and 176 and 24

32. 6 and 17

33. Great Job!!!! Great Job!!!! Thank you for playing! Thank you for playing!