2.  Raw Materials

3.  Routing the Body Major Sawdust Alert!

4.  Shape Belly and Arm Cuts

5.  Sand…a lot

6.  Design and Cut Headstock

7.  Drill Wire Holes in Body

8.  Glue Fret Board to Neck Rubber Band TIGHTLY and dry overnight

9.  Shape Top of Fret Board

10.  Scrape/Sand Neck

11.  Shape Fret Board to 12” Radius

12.  Drill and Install Fretboard Dot Holes

13.  Side Neck Holes Too

14.  Shape and Install Frets Press into place using a fret caul on a drill press

15.  Sand and Bevel Frets

16.  Complete Body Finish!

17.  Install Bridge and Ground Wire

18.  Initial Wiring

19.  Install Tuners

20.  Install Pickups, Final Wiring, Testing

21.  Add Knobs

22.  Install Bean Plate

23.  Sand and Install Nut

24.  Attach Neck

25.  It Looks Like a Guitar!

26.  String and Adjust String Heights

27.  Intonate and Tune

28.  Attach Strap Pegs and Stand Proud!