Download presentation
1
Machine – device that makes work easier
2
B. Work – when an object moves in the same direction as the force applied
3
Unit: Joule (J) or NewtonMeter (Nm)
Work = Force x Distance Unit: Joule (J) or NewtonMeter (Nm)
4
Using a ramp (simple machine) makes it easier for April to move the speaker onto the stage.
4
8
C. Power – measures how fast you can do work
Power = Work / Time Unit: Watt (W)
9
When April lifts a trumpet or a tuba up the stairs, she does work.
9
10
Power equals the amount of work done on an object in a unit of time
Power equals the amount of work done on an object in a unit of time. How much time would it take April to move her boxes upstairs if she runs? 10
11
D. How does a machine make work easier?
1) They change the amount of the force applied. 2) They change the direction of the force applied.
12
E. Mechanical Advantage
Measures how much easier a machine makes work
13
1) Input (Effort) Force:
Force exerted by a person on the machine.
14
2) Output (Resistance) Force
Force exerted by the machine on the object.
15
3) Draw the pulley below. Input force Output Force
16
4) Mechanical Advantage =
Output Force _________________ Input Force
17
17
18
Drums are tuned by tightening and loosening bolts
Drums are tuned by tightening and loosening bolts. Drum keys make the bolts easier to turn. 18
19
Which one would be best to play seesaw?
22
Ideal Machine = 100% efficient
Efficiency: measures how effective a machine is Work output x 100 Work input Ideal Machine = 100% efficient ** meaning you get out what you put in**
23
Ideal machines (100% efficient) do NOT exist !
Because all machines waste some work overcoming friction
25
Simple Machine Simple Machine: a device that does work with only one movement.
26
Using a machine does not mean that you do less work, they make the work easier to do.
27
Simple Machines (6 types)
Lever, pulley, wheel and axis, inclined plane, screw, wedge
28
Inclined plane (ramp)- a flat surface that slopes upward
30
Inclined Plane M.A. = length of slope Height 30
32
Calculate the mechanical advantage.
33
Calculate the mechanical advantage.
35
Which has higher M.A.?
36
Wedge – a triangular, V-shaped object
38
Wedge M.A. = Length of Wedge Width of Wedge 38
39
Screw- inclined plane wrapped around a post
40
Screw The threads of a screw act like an inclined plane to increase the distance over which input force is exerted. 40
41
Levers – a bar that pivots at a fixed point
42
Levers Mechanical Advantage
M.A. = Length of effort arm (Input arm) Length of resistance arm (Output arm)
45
Which one gives you a greater M.A.?
Levers Which one gives you a greater M.A.? 45
46
Levers in the Body Levers can be found throughout your body. In the last two panels of the diagram, where would the output force be? What is the class of lever for each part of the body? 46
47
Levers have the following:
Fulcrum – fixed pivot point Effort arm – force is applied here Resistance arm – exerts the force from the effort arm
48
Pulley – a rope or chain that wraps around a wheel
49
M.A. = number of sections of rope that support the object
Pulleys M.A. = number of sections of rope that support the object 49
50
1) What type of pulley is this? 2) What is the M.A. of this system?
51
Wheel and axle – a large wheel turns a smaller axle
52
Wheel and Axle M.A. = radius wheel radius axle 10 cm 2 cm 52
53
Which one has a higher M.A.?
54
Simple Machines in Sailboats
You can find many simple machines on a sailboat. Where are the pulleys on the diagrams? 54
56
Simple Machines You cannot get more work from a machine than you put into it. Machines simply decrease your effort and make the work easier. Simple Machines all do work the same way: by moving an object through a distance.
57
5) The higher the mechanical advantage, the Less the effort force is and therefore the better the machine is.
58
Compound Machine: two or more simple machines working together
59
6) M.A. = resistance force / effort force
= 6 / 2 = 3
60
Frivolous machines
63
Work – transfer of energy through motion
64
2 conditions for work to be done
Force must be applied Object must move in direction of the force
65
Equations for Work: W = F x d Unit for Work = Joule (J)
Work = force x distance W = F x d Unit for Work = Joule (J)
66
Practice problem W = F x d W = 2400 Nm or J d = 30 m F = 80 N W= ?
You move a stove a distance of 30 meters. This requires a force of 80 N. How much work did you do? W = F x d d = 30 m F = 80 N W= ? = 80 N x 30 m W = 2400 Nm or J
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.