Presentation is loading. Please wait.

Presentation is loading. Please wait.

H.TauregTechnical Forum June 20031 B and T monitoring News on B field mapping B field monitoring Temperature monitoring.

Published byTyrone Owen Modified over 9 years ago

Similar presentations

Presentation on theme: "H.TauregTechnical Forum June 20031 B and T monitoring News on B field mapping B field monitoring Temperature monitoring."— Presentation transcript:

1 H.TauregTechnical Forum June 20031 B and T monitoring News on B field mapping B field monitoring Temperature monitoring

2 H.TauregTechnical Forum June 20032 B field mapping measuring machine for dipole is being constructed solenoid machine to be modified mapping in September /October 2004

3 H.TauregTechnical Forum June 20033 Dipole measuring machine LHC-b, view along beam

4 H.TauregTechnical Forum June 20034 Dipole measuring machine LHC-b, view of vertical plane through the beam

5 H.TauregTechnical Forum June 20035 Solenoid measuring machine sensors rotation axis rail chariot

6 H.TauregTechnical Forum June 20036 Sensor head for solenoid

7 H.TauregTechnical Forum June 20037 56.5 mm 30 mm 56.5 mm 30 mm precision hole for dowel pin hall probes ADC addressing thermistor mux Hall probe plate

8 H.TauregTechnical Forum June 20038 probe 1 probe 2 probe 3 thermistor glass cube “bond” support Hall probes

9 H.TauregTechnical Forum June 20039 NMR and Hall probes NMR Hall

10 H.TauregTechnical Forum June 200310 Try to monitor ‘environment’ inside L3 solenoid and UX cavern Temperature probes NOT part of any specific sub-detector Counting rooms (PX, SX) and racks not included in this job Temperature probes

11 H.TauregTechnical Forum June 200311 Temperature probes

12 H.TauregTechnical Forum June 200312 8 along cavern roof, 4 above cooling units along gangways above racks below muon arm Locations in the cavern

13 H.TauregTechnical Forum June 200313 Locations on the support frames 18 probes around outer rim of support frames, 3 times along beam direction, at the two ends and in the center, 54 total

Download ppt "H.TauregTechnical Forum June 20031 B and T monitoring News on B field mapping B field monitoring Temperature monitoring."

Similar presentations

Magnetic fields R&D update B. PlasternEDM November 2007 Collaboration Meeting Results from prototype studies of a 1/6-scale B 0 coil with Results from.

Magnetic fields R&D update B. PlasternEDM November 2007 Collaboration Meeting Results from prototype studies of a 1/6-scale B 0 coil with Results from.
Cooling Channel Count Recap Cooling channel components # Engineering? Absorber: temperature 8*3 yes pressure 2*3 yes He temp 2*3 level 8*3 yes length (optical)

Cooling Channel Count Recap Cooling channel components # Engineering? Absorber: temperature 8*3 yes pressure 2*3 yes He temp 2*3 level 8*3 yes length (optical)
G.Barber Tracker Planning & Mechanical Preparation June 2009 1 Tracker Planning & Mechanical Preparation An outline of (known) outstanding work to be carried.

G.Barber Tracker Planning & Mechanical Preparation June Tracker Planning & Mechanical Preparation An outline of (known) outstanding work to be carried.
CM-18 June 20071 The Measurement and Monitoring of the Field from the MICE Magnets Michael A Green Lawrence Berkeley Laboratory, Berkeley, USA Frank Filthaut.

CM-18 June The Measurement and Monitoring of the Field from the MICE Magnets Michael A Green Lawrence Berkeley Laboratory, Berkeley, USA Frank Filthaut.
MICE Hall – South Mezzanine Jason Tarrant - STFC l Contents »Device checks with current South Mezzanine »South Mezzanine change summary »Conclusion.

MICE Hall – South Mezzanine Jason Tarrant - STFC l Contents »Device checks with current South Mezzanine »South Mezzanine change summary »Conclusion.
Out2 silk screen assembly H. Wieman revised Jan 30, 2009 for aluminum silkscreen frame with 5 mm dowel pins.

Out2 silk screen assembly H. Wieman revised Jan 30, 2009 for aluminum silkscreen frame with 5 mm dowel pins.
Global Design Effort Detector concept # Plenary introductory talk IRENG07 Name September 17, 2007.

Global Design Effort Detector concept # Plenary introductory talk IRENG07 Name September 17, 2007.
Yurii Levashov Undula t or fiducialization test Oct. 14, 2004 Undulator Fiducialization Test Results Fiducialization Tolerances.

Yurii Levashov Undula t or fiducialization test Oct. 14, 2004 Undulator Fiducialization Test Results Fiducialization Tolerances.
The LHCb Inner Tracker 2007-03 Marc-Olivier Bettler SPS annual meeting Zürich 21 February 2007.

The LHCb Inner Tracker Marc-Olivier Bettler SPS annual meeting Zürich 21 February 2007.
Solenoid Magnetic Field Measurement. MICE solenoid includes 5 coils First solenoid expected at FNAL for magnetic field measurements in April Measurements.

Solenoid Magnetic Field Measurement. MICE solenoid includes 5 coils First solenoid expected at FNAL for magnetic field measurements in April Measurements.
Update Hardware for conductive cooling of the quench resistors has been fabricated at LBNL. Preparation for installation to start this week. Installation.

Update Hardware for conductive cooling of the quench resistors has been fabricated at LBNL. Preparation for installation to start this week. Installation.
Setup of laser tracker on DX side NOTE: X axis along M1s centers, towards SX Z axis along M1-M2 centers, towards M2.

Setup of laser tracker on DX side NOTE: X axis along M1s centers, towards SX Z axis along M1-M2 centers, towards M2.
Leaf Spring prototype preparation M.Lenti. Reminder Piet’s proposal: two dowels inserted into two mirror holes (vertical alignment); mirror weight as.

Leaf Spring prototype preparation M.Lenti. Reminder Piet’s proposal: two dowels inserted into two mirror holes (vertical alignment); mirror weight as.
Solenoid Magnetic Field Mapping Paul S Miyagawa University of Manchester Objectives Mapper machine Mapper software Simulation Corrections Fitting Future.

Solenoid Magnetic Field Mapping Paul S Miyagawa University of Manchester Objectives Mapper machine Mapper software Simulation Corrections Fitting Future.
Coil Manufacture, Assembly and Magnetic Calibration Facility for Warm and Cold Magnetic Measurements of LHC Superconducting Magnets CERN AT-MTM 1 / 21.

Coil Manufacture, Assembly and Magnetic Calibration Facility for Warm and Cold Magnetic Measurements of LHC Superconducting Magnets CERN AT-MTM 1 / 21.
DELTA Quadrant Tuning Y. Levashov, E. Reese. 2 Tolerances for prototype quadrant tuning Magnet center deviations from a nominal center line < ± 50  m.

DELTA Quadrant Tuning Y. Levashov, E. Reese. 2 Tolerances for prototype quadrant tuning Magnet center deviations from a nominal center line < ± 50  m.
Experimental Area Meeting 10.03.2004V. Bobillier1 Good connection to earth (in many points) of every metallic parts to be installed in the cavern is very.

Experimental Area Meeting V. Bobillier1 Good connection to earth (in many points) of every metallic parts to be installed in the cavern is very.
ATLAS: SCT detector alignment and B field map. Steve Snow New Year 2005 This title describes work that has been growing from low priority at the start.

ATLAS: SCT detector alignment and B field map. Steve Snow New Year 2005 This title describes work that has been growing from low priority at the start.
CFD team supports CERN development 19 May 2011 1M.Battistin CERN May 19 th 2011 C omputational F luid D ynamics team C omputational F luid D ynamics team.

CFD team supports CERN development 19 May M.Battistin CERN May 19 th 2011 C omputational F luid D ynamics team C omputational F luid D ynamics team.
18 June 20031Integration Review B. Schmidt Outline: Filter design and basic concept to ensure seismic stability Filter Installation and the required tooling.

18 June 20031Integration Review B. Schmidt Outline: Filter design and basic concept to ensure seismic stability Filter Installation and the required tooling.

Similar presentations

Ads by Google