1. SARLON COMPLETE STEP_

2.  INTRODUCTION_  BENEFITS_  SUGGESTED SPECIFICATION_  INSTALLATION INSTRUCTIONS_  MAINTENANCE PROCEDURES_  TECHNICAL PROPERTIES_ Sarlon Complete Step Sarlon Complete Step is a printed acoustic PVC floor covering made for installation in staircases. The stair nosing which is integrated into the system, has a different colour, allowing for greater safety.

3. INTRODUCTION_  Acoustic floors are the best way to reduce noise in buildings  The thickness of the concrete slab determines the minimum acoustic rating necessary for the floorcovering to achieve the desired acoustic performance  Residual indentation is a vital consideration when selecting an acoustic product  It is important to find the right balance for your application between acoustic performance and indentation resistance  Sarlon Complete Step is a printed acoustic PVC floor covering made for installation in staircases  The stair nosing which is integrated into the system, has a different colour, allowing for greater safety  The collection consists of 13 colours matching the other Sarlon flooring collections Sarlon Complete Step Sarlon Complete Step is a printed acoustic PVC floor covering made for installation in staircases. The stair nosing which is integrated into the system, has a different colour, allowing for greater safety.

4. BENEFITS_  Good sound insulation of 17dB  Visual contrast on the first step  Stair nosing visual and tactile contrast  Guaranteed safety Sarlon Complete Step Sarlon Complete Step is a printed acoustic PVC floor covering made for installation in staircases. The stair nosing which is integrated into the system, has a different colour, allowing for greater safety.

5. SUGGESTED SPECIFICATION_SHEETING Supply and fix 3.35mm thick x 1.01m wide Sarlon Complete Step heterogeneous vinyl sheeting, manufactured in accordance with EN 651 and adhered with FloorworX No.71 contact adhesive applied to both the sheeting and the previously prepared Class 1 sub-floor in accordance with SANS 10070 (making use of FloorworX Self Leveller when required) using a brush or paint roller at the rate of approximately 3.5m2 per litre per single application, including all cutting and waste Joins must be butted, grooved and heat welded using FloorworX Welding Rod, ensuring that the welding rod bonds to more than 70% of the sheet thickness Sarlon Complete Step Sarlon Complete Step is a printed acoustic PVC floor covering made for installation in staircases. The stair nosing which is integrated into the system, has a different colour, allowing for greater safety.

6. WARRANTY_ FloorworX offers a 5 year limited warranty, subject to our terms and conditions, against defective material provided that it is installed and maintained in accordance with our recommendations Sarlon Complete Step Sarlon Complete Step is a printed acoustic PVC floor covering made for installation in staircases. The stair nosing which is integrated into the system, has a different colour, allowing for greater safety.

7. INSTALLATION INSTRUCTIONS_  Sarlon Complete Step should be installed in accordance with manufacturer’s recommendations  Training Centre is available for installation training to installers SUB-FLOOR_  Sub-floors must be smooth, hard, clean, and dry before laying commences  The final appearance and durability of any resilient flooring installation depends largely on the condition of the surface upon which it is laid  A good sub-floor is vital in achieving a satisfactory adhesive bond and long-term durability  Uneven, solid or suspended timber floors may need preparation to meet the required standard Sarlon Complete Step Sarlon Complete Step is a printed acoustic PVC floor covering made for installation in staircases. The stair nosing which is integrated into the system, has a different colour, allowing for greater safety.

8. SUB-FLOOR_  All sub-floors must be tested for moisture content prior to installation  To prevent problems associated with rising damp - it is essential that a damp- proof membrane be incorporated beneath the sub-floor  The South African Standard Building Regulations require that all sub-floors in contact with the ground are so constructed as to be damp-proof  Water is an integral part of the construction of a sub-floor - the amount of water used depends on the type of sub-floor, the required structural strength and the extent of curing  It is impossible to state a time period after which a sub-floor may be considered dry enough upon which to lay flooring - factors such as ambient temperature, relative humidity, thickness of the slab, type of finish required and methods used to cure the concrete, will affect this period  There are various methods of testing the moisture content within the sub-floor, which includes the use of a Hygrometer – the most practical and accurate instrument Sarlon Complete Step Sarlon Complete Step is a printed acoustic PVC floor covering made for installation in staircases. The stair nosing which is integrated into the system, has a different colour, allowing for greater safety.

9. CLIMATIZATION_ Sarlon Complete Step must be allowed to relax for 24 hours in a uniform room temperature between 18°C and 27°C prior to installation ADHESIVE_  The recommended adhesive for Sarlon Complete Step is FloorworX No.71 contact adhesive. POST INSTALLATION_  It is essential that during the course of installation the material be rolled in both directions with an articulated 68kg three section metal floor roller Sarlon Complete Step Sarlon Complete Step is a printed acoustic PVC floor covering made for installation in staircases. The stair nosing which is integrated into the system, has a different colour, allowing for greater safety.

10. MAINTENANCE_PREVENTIVE CARE  Approximately 80% of the dirt and soiling that has to be cleaned off a floor has been trafficked in from outside the building. More than 90% of that soiling can be avoided by the use of an effective entrance matting system  When less dirt is trafficked through the entrance there will be a reduction in maintenance requirements.  Regular cleaning is more cost-effective and hygienic than occasional heavy duty cleaning  Wipe up any grease and oil spills immediately and treat stains as soon as they are observed  Black rubber wheels and rubber furniture feet can discolour the floorcovering - hard plastic is preferred  Always follow the manufacturer’s dosage instructions regarding the use of cleaning chemicals Sarlon Complete Step Sarlon Complete Step is a printed acoustic PVC floor covering made for installation in staircases. The stair nosing which is integrated into the system, has a different colour, allowing for greater safety.

11. MAINTENANCE_POST INSTALLATION SITE CLEAN  Floor maintenance begins immediately after the completion of installation  The initial step is to remove any loose dirt or debris using a dry mop, broom or vacuum  Sand, construction debris and sharp-edged objects may result in irreparable damage being inflicted to the new floor.  Remove any visible adhesive residue using a damp cloth, once the adhesive has cured it will be difficult to remove  If other trades are working in the building after the installation of the flooring, the floor must be protected from subsequent damage by the use of thick paper, cardboard or hard board.  No wet maintenance must take place until 72 hours (3 days) have elapsed from the time of installation - this is to ensure that the adhesive has sufficient time to cure properly and develop full bond strength Sarlon Complete Step Sarlon Complete Step is a printed acoustic PVC floor covering made for installation in staircases. The stair nosing which is integrated into the system, has a different colour, allowing for greater safety.

12. MAINTENANCE_INITIAL CLEAN  Dust mop or vacuum the floor to remove loose soil and dust  Scrub the floor using a solution of FloorworX Maintain diluted 1:10 with clean water, with a rotary machine fitted with a blue pad  Remove the residue immediately after scrubbing using a wet/dry vacuum  Rinse with clean water using a flat mop and allow the floor to dry  Dry buff the floor using a rotary or high speed machine fitted with a white pad  For higher traffic areas, apply FloorworX Spray Buff in a fine stream or mist onto the floor in front of a rotary machine fitted with a red pad and work in until dry  FloorworX Spray Buff applied in this manner at the rate of 600m2 per litre assists in maintaining a smooth surface and constant level of gloss Sarlon Complete Step Sarlon Complete Step is a printed acoustic PVC floor covering made for installation in staircases. The stair nosing which is integrated into the system, has a different colour, allowing for greater safety.

13. MAINTENANCE_REGULAR CLEANING  Dust mop with flat mop or vacuum on a daily basis to remove dust and loose dirt  Treat spills, spots and stains immediately  Spot clean by hand with a red or white pad and a diluted solution of FloorworX Maintain, working from the outside of the mark to its centre  Dry buff or spray buff periodically, as described in 4.1 Initial Clean above  The frequency of dry buffing or spray buffing is dependent on the amount of foot traffic and the effectiveness of the daily cleaning regime Sarlon Complete Step Sarlon Complete Step is a printed acoustic PVC floor covering made for installation in staircases. The stair nosing which is integrated into the system, has a different colour, allowing for greater safety.

14. MAINTENANCE_PERIODIC MAINTENANCE  Scrub the floor using a solution of FloorworX Maintain diluted 1:10 with clean water, with a rotary machine fitted with a blue pad  Remove the residue immediately after scrubbing using a wet/dry vacuum  Rinse with clean water using a flat mop and allow the floor to dry  Dry buff the floor using a rotary or high speed machine fitted with a white pad  For higher traffic areas, apply FloorworX Spray Buff in a fine stream or mist onto the floor in front of a rotary machine fitted with a red pad and work in until dry  FloorworX Spray Buff applied in this manner at the rate of 600m2 per litre assists in maintaining a smooth surface and constant level of gloss Sarlon Complete Step Sarlon Complete Step is a printed acoustic PVC floor covering made for installation in staircases. The stair nosing which is integrated into the system, has a different colour, allowing for greater safety.

15. TECHNICAL PROPERTIES_ Sarlon Complete Step Sarlon Complete Step is a printed acoustic PVC floor covering made for installation in staircases. The stair nosing which is integrated into the system, has a different colour, allowing for greater safety.

16. TECHNICAL PROPERTIES_ Sarlon Complete Step Sarlon Complete Step is a printed acoustic PVC floor covering made for installation in staircases. The stair nosing which is integrated into the system, has a different colour, allowing for greater safety.

17. Please feel free to visit our newly revamped website at www.floorworx.co.zawww.floorworx.co.za Read our Blog on our website at http://www.floorworx.co.za/category/blog/http://www.floorworx.co.za/category/blog/ Subscribe to our Newsletter by mailing your request to info@floorworx.co.zainfo@floorworx.co.za Follow us on Facebook, Twitter, YouTube & Pinterest END OF PRESENTATION_