1. Technology Education Centre WELB RA Moffatt WELB Technology & Design GCSE Coursework To Design a Bicycle Hazzard / Indicator Lights

2. To Design Bicycle Hazzard / Indicator Lights Concepts! Concepts

3. Bicycle Hazzard Lights

4. Concept 1 press-moulded or vacuum formed

5. Bicycle Hazzard Lights

6. Show using concept sketches how this design may be attached to the bicycle frame? Viewed from the rear Bicycle Hazzard Lights

7. LED’s Bicycle Hazzard Lights

10. This design may have a duel function: 1)A Hazzard light; 2)A container for a puncture repair kit.

11. Bicycle Hazzard Lights Fabricated using acrylic plastic

12. Bicycle Hazzard Lights

13. Press-moulding The above former could also be used for the vacuum forming process.

14. Bicycle Indicator Lights

15. Bicycle Hazzard Lights The sides are held on by double-sided tape when vacuum forming and will be left inside the casing when removing the former. A symmetrical profile vacuum formed.

16. Why not a Bicycle Lights Theme? A Bicycle Hazzard Light!

17. 555 Astable Circuit Bicycle Indicators Concept fabricated In acrylic plastic

18. Bicycle Hazzard Lights 555 IC Astable Circuit fabricated In acrylic plastic

19. Bicycle Indicators This concept was fabricated In acrylic plastic

20. Bicycle Indicators 555 IC Astable Circuit

21. Bicycle Hazzard Lights

22. A simplistic form vacuum formed

23. Design / Graphics Tasks!! How is the saddle adjusted for height? How is the reflector secured to the Saddle stem?

24. Design / Graphics Tasks!! Design a saddle-bag attachment for this Bicycle design? How could the bicycle pump be fitted?

25. Bicycle Lock

26. An unusual and interesting bicycle lock design.