Download presentation
Presentation is loading. Please wait.
Published byDennis Foster Modified over 9 years ago
1
The Art of LEGO Design Michael Rosenblatt September 19, 2000
2
Sources The Art of LEGO Design, by Fred G. Martin General Robotics 1999 LEGO kit instructions My own experience
3
Goals: Build better robots –Minimize mechanical breakdowns –Build robots that are easy to control –Encourage good design strategy –Strive for elegant, clever solutions Know your materials
4
Know your Materials Quick facts: –Plastic bricks since 1949 (wooden blocks prior) –On average, 2100 different parts each year –Manufacturing tolerance: 1/1000 of an inch –Number of ways of combining six 8-stud bricks: 102,981,500 –Widely used by scientists and engineers as a rapid prototyping tool
5
Geometry 1-stud brick dimensions: exactly 5/16” x 5/16” x 3/8” (excluding stud height 1/16”), This is the base geometry for all LEGO components Three plates = 1 brick in height
6
Structure Common pitfall when trying to increase mechanical robustness:
7
Structure The right way:
8
Structure The right way:
9
Connector pegs Black pegs are tight-fitting for locking bricks together. Grey pegs turn smoothly in bricks for making a pivot
10
Structure Don’t do’s: –LEGO bricks HATE duct tape –LEGO bricks HATE hot glue and epoxy –Super glue also. You never need adhesives to build reliable LEGO structure
11
Help!!!
12
Drivetrain LEGO Gears 8T 16T 24T 40T 24T Crown ??T Worm Bevel
13
Worm Gears Pull one tooth per revolution 1 2 3 4 Result is a 24:1 gearbox Not back driveable!
14
Motors 9V Gear Motor ~ 150 mA 300 RPM (no load) Internal gear reduction
15
Motors 9V Micro Motor 20-30 RPM Internal two stage orbital gearbox (wow!)
16
Mounting Motors Note Bulge under motor
17
Mounting Motors Add a gear:
18
Mounting Motors Use special 2x1 stud plate with “wing”
19
Build for good control Slow vs. fast Gear backlash
20
Wires Take pride in your wires!!! Wire management: use zip ties!!
21
Design Strategy Incremental –Test components parts as you build them Drivetrain sensors, sensor mounting Structure Don’t be afraid to redesign Keep it simple –Easy to get excited
22
Design Strategy Drivetrain driven Chassis/structure driven Modular?
23
Testing Don’t wait until you have a final robot to test –Interaction of systems –Work division (work concurrently) Develop test methods Don’t stop at first good result, test for repeatability
24
Philosophy Have fun Be creative, unique Strive for cool solutions, that work! Aesthetics: it’s fun to make beautiful robots!
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.