1. CDS DIRECTIONAL CONTROL VALVES CH60 CH100

2. FEATURES AND BENEFITS 3 - Cost saving products 2 - Easy servicing 4 - High quality level 5 - Good Performance 1 - Easy Configuration - Simplify project planning and system design - Requires that SD has good service net

3. CONFIGURATION GENERAL DATA Average weight -40°C TO +80 °C (-40 °F TO + 176 °F )

4. CONFIGURATION STACKABLE-TYPE

5. CH60 Dimensions CONFIGURATION

6. CH100 Dimensions

7. CONFIGURATION LOW PRESSURE DROP THROUGH THE OPEN CENTER

8. CONFIGURATION TIE RODS KIT (CH 60 & CH100)

9. INLET COVER - MODELS CONFIGURATION & & SEE IT LATER CH60 - 2 MODELS CH100 - 2 MODELS

10. INLET COVER - PORTS OPTIONS & CONFIGURATION

11. INLET COVER CONFIGURATION Main Relief Valves Options 2 Options

12. CONFIGURATION AVAILABLE THREADS FOR INLET COVER 9 TYPES

13. OUTLET COVER - MODELS CONFIGURATION & 2 TYPES

14. OUTLET COVER - PORTS OPTIONS CONFIGURATION 11 OPTIONS

15. OUTLET COVER CONFIGURATION (HYD. SCHEME) PORTS OPTIONS

16. CONFIGURATION AVAILABLE THREADS FOR OUTLET COVER 6 TYPES

17. WORK SECTIONS - MODELS CONFIGURATION CH 60 - 2 TYPES CH100 - 2 TYPES

18. CIRCUIT TYPES CONFIGURATION 1 - PARALLEL CIRCUIT (96%) 2 - TANDEM CIRCUIT (4%) 3 - SERIES CIRCUIT

19. CONFIGURATION 1 - PARALLEL CIRCUIT (96%) Most used in mobile equipment More than one function can be operated at the same time

20. CONFIGURATION 2 - TANDEM CIRCUIT (4%) Priority

21. 3 - SERIES CIRCUIT (only CH60) CONFIGURATION

22. SPOOL TYPES CH60 - 4 TYPES CH100 - 4 TYPES

23. CONFIGURATION SPOOL TYPES

24. SPOOL TYPES - IDENTIFICATION CONFIGURATION

25. SPOOL CONTROL TYPES 11 SPOOL CONTROL TYPES

26. CONFIGURATION SPOOL CONTROL TYPES

27. CONFIGURATION SPOOL CONTROL TYPES

28. CONFIGURATION SPOOL CONTROL TYPES

29. CONFIGURATION SPOOL CONTROL TYPES

30. CONFIGURATION SPOOL CONTROL TYPES

31. CONFIGURATION SPOOL CONTROL TYPES

32. CONFIGURATION SPOOL CONTROL PROTECTION BOOTS ( RUBBER PROTECTORS) CH60 - CODE No. 043960 CH100 - CODE No. 040359

33. SPOOL CONTROL SIDE 3 OPTIONS CONFIGURATION

34. CENTERED TYPES 11 CENTERED TYPES

35. CONFIGURATION CENTERED TYPES

36. CONFIGURATION CENTERED TYPES

37. CONFIGURATION CENTERED TYPES

38. CONFIGURATION AVAILABLE THREADS FOR WORK SECTIONS 6 TYPES

39. CONFIGURATION AUXILIARY VALVES 9 AUXILIARY VALVE SEVERAL COMBINATION

40. CONFIGURATION AUXILIARY VALVES RELIEF VALVE - EXT ADJUSTMENT RELIEF VALVE - INT ADJUSTMENT PLUG

41. CONFIGURATION AUXILIARY VALVES PILOTED RETAINING FLOW CONTROL VALVE ANTI CAVITATION DIRECT RELIEF WITH ANTICAVITATION AND EXTERNAL ADJUSTMENT (EXCEPT ELECTRICAL DRIVE) DIRECT RELIEF WITH ANTICAVITATION AND INTERNAL ADJUSTMENT (ONLY ELECTRICAL DRIVE)

42. CONFIGURATION AUXILIARY VALVES COMPATIBILITY

43. SPECIAL INLET COVERS MODELS P60 & P100

44. SPECIAL INLET COVERS SECONDARY FLOWPRIORITY FLOW

45. SPECIAL INLET COVERS SECONDARY FLOWPRIORITY FLOW

46. SPECIAL SECTIONS AP - ADAPTER PLATES AP60/100 & AP100/60 I - FLOW DIVIDER / FLOW COMBINER M - MID INLET PRIORITY FLOW CONTROL & SPECIAL INLET COVER S60-XX & E100-XB3

47. AP - ADAPTER PLATE AP100/60 CH100 Working Section CH60 Working Section Adapter Plate AP 100/60 - 041116 Conversion Adapter Plate From CH 100 Series Working Section to CH 60 Series Working Section

48. AP - ADAPTER PLATE AP60/100 Conversion Adapter Plate From CH 60 Series Working Section to CH 100 Series Working Section CH100 Working Section CH60 Working Section Adapter Plate AP 60/100 - 041118

49. Pressure By pass Outlet Relief Valve Inlet (Second Pump) Special Plug I - FLOW COMBINER If the work sections before the Combiner are in Neutral Position the flow from the Pump 1 (Inlet Cover) will be added to the flow of the Pump 2 (“A” Port).

50. I - FLOW DIVIDER Pressure By pass Outlet Special Plug Relief Valve Outlet (First Pump) Inlet (Second Pump) The flow from the Pump 1 returns through the “A” port. “B” is the Inlet Port of the flow from the Pump 2.

51. M - MID INLET PRIORITY FLOW CONTROL - CH 60 (504054)

52. M - MID INLET PRIORITY FLOW CONTROL - CH60 (503892)

53. M - MID INLET PRIORITY FLOW CONTROL (504042)

54. M - MID INLET PRIORITY FLOW CONTROL (503653)

55. O-ring 001915 Qty. 04 Washer Space – 011045 Qty.03 E100-XB3 – 043727 X- TOP PORT PLUGGED SPECIAL INLET COVER FOR MID INLET PRIORITY FLOW FOR CH100

56. O-RING – 001914 Qty. 04 Washer Space – 011046 Qty.03 S60-XX - 035047 SPECIAL INLET COVER FOR MID INLET PRIORITY FLOW FOR CH60

57. MAIN APPLICATIONS COMBINES – AGCO

58. MAIN APPLICATIONS TRACTORS – AGCO MODELS 200, 600, 5200, 5300

59. MAIN APPLICATIONS TRACTORS – VALTRA HEAVY AND MEDIUM LINES

60. MAIN APPLICATIONS LOADER AND BACKHOES – MASSEY FERGUSON (AGCO) MODELS MF86 AND MX750

61. MAIN APPLICATIONS CRANES – MADAL – IMAP – MASAL

62. AG SPRAYERS – JACTO MAIN APPLICATIONS

63. GARBAGE TRUCK – EQUITRAN COLECTOMATIC 4000 – USIMECA MAIN APPLICATIONS