2. William Norris jwn0009 Identify tool and equipment safety procedures in woodworking, welding, electrical, small engine, plumbing, and masonry operations. Click to begin.

3. ElectricalEnginesWelding 10 Points 20 Points 30 Points 40 Points 50 Points 10 Points10 Points10 Points10 Points 20 Points 30 Points 40 Points 50 Points 30 Points 40 Points 50 Points Plumbing FFA Knowledge

4. What year was the FFA founded?

5. 1928

6. What are the official FFA colors?

7. National Blue and Corn Gold

8. Who wrote the FFA creed and in what year?

9. E.M. Tiffany in 1930

10. What are the parts of the FFA emblem?

11. Cross section of the ear of corn, the rising sun, the owl, the plow, the eagle, and the words

12. What is the FFA motto?

13. Learning to Do, Doing to Learn, Earning to Live, Living to Serve

14. Does a microwave run off of a 120 volt or 240 volt circuit?

15. 120 volt

16. What color is the ground wire?

17. Green or bare

18. What does the NEC stand for?

19. National Electric Code

20. What does GFCI stand for?

21. Ground Fault Circuit Interrupter

22. What kind of switch allows you to operate a light from 2 different locations?

23. 3-way Switch

24. What is the difference between PVC and CPVC?

25. PVC is for cold water. CPVC is for both hot and cold.

26. What is the purpose of the P or S-trap?

27. To eliminate the odor.

28. What part of the hot water heater is responsible for supplying heat to the water?

29. The element

30. Name 3 types of pipe that are approved for residential plumbing.

31. PVC, CPVC, PEX, Copper, and Galvanized

32. If Jesus wanted to convert a piece of PVC pipe from ¾ inch to ½ inch what materials would he need?

33. A PVC reducer, PVC primer, and glue

34. How many strokes does a 4- cycle engine have?

35. Four

36. What is the difference between a 4-cycle engine and a 2-cycle engine?

37. Gas and oil are combined in a 2- cycle engine.

38. Name the 4- strokes.

39. Compression, power, intake, and exhaust

40. What is the purpose of the carburetor?

41. Delivers correct mixture of air and fuel to the combustion chamber

42. What is valve tappet clearance?

43. The distance valves open to allow incoming mixture in and exhaust gasses out

44. Name two types of welding.

45. Arc, mig, tig, brazing, and oxyacetylene

46. What is the name of the device used in stick welding?

47. Electrode

48. What is produced when welding chemicals and air mix?

49. Slag

50. What degree shades are required for stick welding?

51. #10

52. What is the purpose of the negative cable when attached to metal?

53. Serves as the ground to complete the electrical circuit

54. Make your wager

55. What type of root comes out of the pericycle?

56. The lateral root