Page 1 of 33 GPSMAP 76C Waypoint Entry and Route Creation.

of 33 GPSMAP 76C Waypoint Entry and Route Creation

of 33 Our cruise is from Sturgeon Bay’s Center Channel to the Entrance of Menominee’s Marina. Sturgeon Bay to Menominee

of 33 This clearly needs some corrections at the Menekaunee Shoal nun #6 and other spots Menekaunee Shoal

of 33 Insert a Waypoint into the Route –Select the route and then from pull down select Insert Section. Inserted a waypoint and move it so you can go around the number 6 nun at Menekaunee.

of 33 Insert a 2 nd additional Waypoint Select Insert Section on Pull Down Menu Grab Route in and move the new waypoint so as to clear the harbor entrance.

of 33 Zoom in on the Harbor Shows a Wreck in the path. More Waypoint insertion? Or just move a waypoint?

of 33 How to do it on the 76C? The Starting Point Preferred start is without any waypoints or routes in the GPS (not mandatory) Put GPS in GPS Off mode Then create waypoint 001 using Mark Waypoint Etc. till all points for the route of interest are created Then relocate on the Map page

of 33 hold Page Power On and get into GPS Off Mode Press and hold Power until intro page appears, then press Page and Satellite Status screen appears. Press Menu, select Use With GPS Off and press Enter Menu Enter

of 33 Turn on backlight Press Power (briefly), then rocker up to turn backlight on. Press Enter to confirm Enter

of 33 Set backlight to “stay on” 2x Menu Enter Press Menu twice, scroll to Setup then press Enter. Scroll to Display and press Enter. Scroll down to Backlight Timeout

of 33 Set backlight to “stay on” Enter Page Press Enter and scroll up to Stays On. Press Enter then press Page to return to main page, Satellite Status Enter

of 33 Delete the old routes Quit Menu Enter

of 33 GET TO ROUTES MENU Press QUIT and scroll OVER to ROUTES. Press Enter then MENU Quit Find Enter

of 33 Delete all the Waypoints Enter Menu Enter

of 33 Deleting All Waypoints Continued Quit Enter To the GPS Page

of 33 Set up new Location Scroll down to select MAP press Enter. Zoom IN a bit. Scroll to Routes starting point. Enter In Menu Scroll & & more Zoom In

of 33 Mark Waypoint Enter hold Press ENTER when in final position, Scroll

of 33 Change Symbol Enter

of 33 Change the name of Waypoint? Scroll Enter

of 33 Enter 1 st Waypoint Menu Enter

of 33 Move to 2nd New Location Out Enter Scroll

of 33 Mark 2 nd Waypoint hold Enter Menu

of 33 Selection of 3 rd New Location Enter Scroll

of 33 Zoom in on 3 rd Location In Scroll In Enter

of 33 Enter 3 rd Waypoint hold Enter Menu Enter

of 33 Look for 4 th New Location Enter Scroll

of 33 Zoom in on 4 th Location IN Enter hold Enter

of 33 The Route Waypoints are Entered Enter Menu Select Routes Menu 4 th Waypoint Entered

of 33 Route using Waypoint List

of 33 Route from Waypoint List - cont. Route is named 001 - 001

of 33 Point 2 and 3

of 33 Route is now named 001 - 004

Page 1 of 33 GPSMAP 76C Waypoint Entry and Route Creation.

Similar presentations

Presentation on theme: "Page 1 of 33 GPSMAP 76C Waypoint Entry and Route Creation."— Presentation transcript:

Similar presentations

About project

Feedback

Log in

Auth with social network:

Page 1 of 33 GPSMAP 76C Waypoint Entry and Route Creation.

Similar presentations

Presentation on theme: "Page 1 of 33 GPSMAP 76C Waypoint Entry and Route Creation."— Presentation transcript:

Similar presentations

About project

Feedback