1. Unit 6/P6 – Timber Frame Construction Name ________________
Premade timber walls provide main support of structure.
Often set on a raft foundation
Less tolerance for un-even floor than in traditional and concrete construction
Inner wall is made from stud wall nailed to sheets of woods.
100mm x 50mm studs on to 18mm ply
Void filled with insulation
These are bolted down to the concrete floor with an expansion bolt.
Factory prefabrication guarantees quality and no weather delays.
Less time on site
Crane required
Windows and door opening pre-planned so less chance for on-sight error.
Out leaf or external wall normally brick and is non-load bearing.
Provides insulation and weatherproofing.
Roof is normally truss work, slate or tile.

2. Unit 6/P6 – Timber Frame Construction Name ________________
Internal walls are non load bearing or stud wall.
Plasterboard as per traditional construction.
Vapour seal
Timber is treated
Fire resistant
Dry Rot
First floor is suspended timber floor, can be internal or sandwhiched between floors
Known for energy efficiency
Condensation is likely to form in the cavity so a moisture barrier or vapour check is used on the internal wall.
Services are run through walls and foundations as per a traditional building
Stairs and windows made off site and fitted.

3. Unit 6/P6 – Timber Frame Construction
Name ________________