1. Smart led and leds go technology Levi Eshkol 57/3, Tel Aviv, Israel

2. 1 SEMS Smart Street Light System
CONTENTS
2 Worldwide Projects
— 2 —

3. CONTENTS SEMS Smart Street Light System 2 Worldwide Projects
SEMS Introduction
SEMS System Architecture
How does it work?
SEMS Main Functions
Products
Central Monitoring Software
Data Concentrator
Lamp Controller
Solutions
SEMS Powerline
SEMS Wireless
SEMS Solar
SEMS Tunnel
CONTENTS
2 Worldwide Projects
— 3 —

4. SEMS Introduction (Smart Energy Management System)
SEMS is a remote lighting management solution that offers you detailed, lamp-level management capabilities.
The right amount of light is provided where and when needed, as you will be able to turn ON / OFF or dim every street light in your city, manually or according to pre-set area schedules.
Using the existing infrastructure, you will have live detailed information over the grid
and transform the existing distribution network into an intelligent infrastructure of
the future.
In-depth grid management gives an accurate real-time system map, feedback for any change occurring along the grid, reduces energy loss and offers advanced maintenance optimization tools. But how does SEMS actually work?

5. SEMS System Architecture

6. How does it work? TURNING THE STREET LIGHTS ON AND OFF
SEMS offers lamp-level management capabilities for all the lights. Clients can switch off and on individual lights according to pre-programmed schedules.
DIMMING THE LIGHTS
It can considerably reduces energy consumption and CO2 emissions to dim lights to lower levels in mid-nights when traffic are less. You will not only save money, but also reduce light pollution.
COMMUNICATING THROUGH THE GRID
SEMS communicates using PLC (Power Line
Communication) or Zigbee between the
lamps and the power supply cabinets, and using any IP-based communication solution available between the cabinets and the mainframe. There is no need to use any civil works to install the system.
SENSING THE CITY
The street light networks managed by SEMS are continuously under power, therefore, there are a lot of sensors can be added on the existing infrastructure, thus transforming the street lighting grid into a smart city platform for the future.
OPEN PROTOCAL OF CMS
There are two options for CMS, clients are free to choose SEMS software, or CMS from Street light Vision which is an open third party software adopted by various of hardware companies.
REPORTING & MAINTENANCE SCHEDULING
SEMS CMS offers advanced analytic tools, failure reporting, customizable maintenance planning, automatic daily backups and recovery procedures
for a seamless functioning of the system.

7. LAMP LEVEL
SEMS lamp controllers (RTUs) manage and monitor every lamp in the city, performing ON/OFF switching
and dimming functions, in addition to detailed feedback and error reporting.
POWERLINE /ZIGBEE COMMUNICATION
The communication between the data concentrators (CCs) and the lamp controllers (RTUs) are made via Power Line Communication (PLC) or Zigbee.
CONCENTRATE LEVEL
Concentrators are deployed in the electric distribution cabinets, it receives all the software commands and consequently manages the lamp controllers (RTUs), but also gathers all the information from the lamp controllers, analyzes, prioritizes, compresses and feeds it to the SEMS software.
IP BASED COMMUNICATION
Communication between electric distribution cabinets (where the Concentrators are installed) and central monitoring software is performed via any IP-based communication available, Ethernet or WCDMA/GPRS.
SOFTWARE CONTROL LEVEL
SEMS CMS is a integrated Network Management Software that allows the remote control of the street lighting system and 24/7 grid monitoring.

8. SEMS Main Functions

9. Energy Conservation
Adjusting lamps illumination to a configured level at midnight;
30% extra energy saving by dimming function;
Configure illumination levels according to requirements of roads, time, date;
Lamp dimming will lengthen lamp lifetime.

10. System Requirements for Cellphone Control
Five Function
Easy remote management, control, test, signal communication, dimming, and inspection;
Cellphone control (GSM mode, use together with GSM modem.)
System Requirements for Cellphone Control
Android recommended (IOS pending)
GSM card required
GSM modem required

11. Safety Protection
Detect lamp failure/ theft, report alarm, lengthen lamp lifetime 30%.
Report over-load circuit and alarm;
Alarm notice: Server, cellphone message, .

12. Wisdom Management
Data collection and create report, analyze data efficiently
Energy saving reports in Excel and graphs format, easy export

13. Quick Maintenance
Detect failure and alarm, save labor cost for touring the roads.
Save maintenance cost 50%.

14. CONTENTS SEMS Smart Street Light System 2 Worldwide Projects
SEMS Introduction
SEMS System Architecture
How does it work?
SEMS Main Functions
Products
Central Monitoring Software
Data Concentrator
Lamp Controller
Solutions
SEMS Powerline
SEMS Wireless
SEMS Solar
SEMS Tunnel
CONTENTS
2 Worldwide Projects
— 14 —

15. Central Monitoring Software
The software runs on the host computer, it serves as the platform to control and manage the system, to collect measured data (current, power consumption, alarm, etc.) and monitor the status of the lighting system.

16. Data Concentrator
SEMS-CC08 is an Enhanced Central Controller based on ARM9 platform. It provides interfaces and ports (e.g. TCP/IP) to the host computer for various applications, while managing an intelligent control network consisting of many terminal nodes over power lines or Zigbee network。

17. Lamp Controller
The Remote Terminal Units (RTU) receive commands from a Concentrator to power on/off/dim the lamp, monitor the status of the lamp and transmit the data back to the Concentrator. It communicate with data concentrator via power lines or Zigbee network.
Powerline Lamp Controller
Used for controlling street lights via power lines.
Installed in inspection cabinet of lamp pole or in the luminaire.
Wireless Lamp Controller
Used for controlling street lights via Zigbee wireless network.
Installed on top of lamp pole or in the luminaire.
Solar Light Controller
Used for controlling solar treet lights via Zigbee network.
Installed on top of lamp pole or in the luminaire.

18. Technology Capacities
IOTCOMM solution transforms road lights into intelligent, energy-efficient, remotely managed networks that deliver dependable lighting at 30% less cost than luminaires alone.
SEMS system paves the way for Smart City, when it’s working with various of environment sensors.
Supply on-line technique guidance and training course free of charge.
Full solutions for sodium, LED, HID, solar lights, etc.
Compliance with wide range of power transformers and ballasts including Philips, Osram, Meanwell, Inventronics, MOSO, etc.
More than 300,000pcs lamp controllers are operating in hundreds of cities, helping utilities manage the lamps in a energy-efficient way, and free of labor touring.
Offer OEM and ODM service, reference are Philips solar team, and Dazzeltek of Neitherlands for its wireless system.

19. CONTENTS SEMS Smart Street Light System 2 Worldwide Projects
SEMS Introduction
SEMS System Architecture
How does it work?
SEMS Main Functions
Products
Central Monitoring Software
Data Concentrator
Lamp Controller
Solutions
SEMS Powerline
SEMS Wireless
SEMS Solar
SEMS Tunnel
CONTENTS
2 Worldwide Projects
— 19 —

20. SEMS Powerline System Lamp metering Real time control
Lamp fault diagnosing
On / off / dim schedules
Powerline fault diagnosing
Energy saving reports
Support video system
3 phase power metering
Support environment sensors
Work as Smart City platform

21. SEMS Powerline System--------Case Study
Location: Shenyang, PRC
Time: 2013
Luminaire: LED
Quantity: 14,000 units
Road: 135KM freeway

22. SEMS Wireless System Lamp metering Support video system
Real time control
3 phase power metering
Lamp fault diagnosing
Support environment sensors
On / off / dim schedules
Work as Smart City platform
Energy saving reports

23. SEMS Wireless System--------Case Study
Location: Santiago, Chile
Time: 2014
Luminaire: LED
Quantity: 20 units
Road: pilot

24. SEMS Solar System Lamp metering 3 phase power metering
Real time control
Support environment sensors
Lamp fault diagnosing
Auto-run function
On / off / dim schedules
Battery charge & discharge control
Powerline fault diagnosing
Energy reports

25. SEMS Solar System--------Case Study
Location: Delingha, Qinghai, PRC
Time: 2014
Luminaire: LED + solar
Quantity: 2,000 units

26. SEMS Tunnel System Lamp metering Support video system
Real time control
Support vehicle detector
Lamp fault diagnosing
Support light sensor control
On / off / dim schedules
3 phase power metering
Powerline fault diagnosing
Support environment sensors
Energy saving reports

27. SEMS Tunnel System--------Case Study
Location: Xiamen, PRC
Time: 2014
Luminaire: LED
Quantity: 3,000 units

28. SEMS Industrial System
Lamp metering
Real time control
Lamp fault diagnosing
On / off / dim schedules
Energy saving reports
3 phase power metering
Support motion sensors
Support light sensor control

29. SEMS Industrial System--------Case Study
Location: Malaysia
Time: 2014
Luminaire: LED highbay
Quantity: 200 units

30. CONTENTS 1 SEMS Smart Street Light System 2 Worldwide Projects
3 IOTCOMM Introduction
— 30 —

31. City Road Lighting Smart Control
Stuttgart, Germany 200pcs LED lamps April 2011 Unilumin provided

32. City Road Lighting Smart Control
Turkmenistan 4000pcs LED lamps May 2013 Client provided20

33. City Road Lighting Smart Control
Tehran, Iran 200pcs LED lamps May 2014 Client provided

34. City Road Lighting Smart Control
Israel 36pcs LED lamps Mach 2014 Client provided

35. City Road Lighting Smart Control
Guangzhou-Shenzhen Highway, Guangdong, PRC 7000pcs LED lamps June 2010 Unilumin provided

36. City Road Lighting Smart Control
Xiamen, Fujian, PRC 2000pcs HPS lamps Sep Client provided

37. City Road Lighting Smart Control
Yunxiao, Fujian, PRC
5000pcs
LED lamps
Oct. 2013
Client provided

38. Tunnel Light Smart Dimming System
Gansu, China
1578pcs
LED Tunnel lamps
March, 2012
Client provided

39. Smart led and leds go technology Levi Eshkol 57/3, Tel Aviv, Israel