Presentation is loading. Please wait.

Presentation is loading. Please wait.

COMPARATORS. (i) In mass production, where components are to be checked at a very fast rate. (ii) As laboratory standards from which working or inspection.

Published byMadlyn Stokes Modified over 8 years ago

Similar presentations

Presentation on theme: "COMPARATORS. (i) In mass production, where components are to be checked at a very fast rate. (ii) As laboratory standards from which working or inspection."— Presentation transcript:

1 COMPARATORS

2 (i) In mass production, where components are to be checked at a very fast rate. (ii) As laboratory standards from which working or inspection gauges are set and correlated. (iii) For inspecting newly purchased gauges. (iv) Attached with some machines, comparators can be used as working gauges to prevent work spoilage and to maintain required tolerances at all stages of manufacturing. (v) In selective assembly of parts, where parts are graded in three or more groups depending upon their tolerances.

3 (1) Mechanical comparators (2) Optical comparators (3) Electrical and Electronic comparators (4) Pneumatic comparators (5) Fluid displacement comparators (6) Projection comparators (7) Multi-check comparators (8) Automatic gauging machines

4 REEDS TYPE COMPARATOR DIAL INDICATOR Johansson 'Mikrokator‘ Sigma Comparator

5 Rack and pinion Cam and gear train Lever with toothed gear. Compound levers Twisted taut stripLever combined

6

7

8

9

10 PRINCIPLE LINEAR VARIABLE DIFFERENTIAL TRANSFORMER(LVDT)

11

12

13 PHYSICAL PHENOMENON SYSTEMS OF PNEUMATIC COMPARATORS SOLEX PNEUMATIC

14

15

16

17 THANK YOU

Download ppt "COMPARATORS. (i) In mass production, where components are to be checked at a very fast rate. (ii) As laboratory standards from which working or inspection."

Similar presentations

Instrumentation and Measurements Dr. Mohammad Kilani

Instrumentation and Measurements Dr. Mohammad Kilani
Linear Motion Linear motion is the most basic of all motions. Uninterrupted objects will continue to move in a straight line indefinitely. Under every.

Linear Motion Linear motion is the most basic of all motions. Uninterrupted objects will continue to move in a straight line indefinitely. Under every.
MAGNA M a g n a D i g i t e c h I n d i a P r i v a t e L i m i t e d PROBLEM SOLVING Scope : Model the entire Mechanism Assembly parts and to determine.

MAGNA M a g n a D i g i t e c h I n d i a P r i v a t e L i m i t e d PROBLEM SOLVING Scope : Model the entire Mechanism Assembly parts and to determine.
Measurement of force torque and pressure

Measurement of force torque and pressure
Methods of exerting forces and displacements introduction to the design of „basic machine”

Methods of exerting forces and displacements introduction to the design of „basic machine”
I.1 ii.2 iii.3 iv.4 1+1=. i.1 ii.2 iii.3 iv.4 1+1=

I.1 ii.2 iii.3 iv.4 1+1=. i.1 ii.2 iii.3 iv.4 1+1=
 Power split transmissions & hydraulic hybrid systems  Output coupled transmissions  Input coupled transmissions  Dual stage and compound systems 

 Power split transmissions & hydraulic hybrid systems  Output coupled transmissions  Input coupled transmissions  Dual stage and compound systems 
I.1 ii.2 iii.3 iv.4 1+1=. i.1 ii.2 iii.3 iv.4 1+1=

I.1 ii.2 iii.3 iv.4 1+1=. i.1 ii.2 iii.3 iv.4 1+1=
ELECTRICITY GENERATING DANCE FLOOR BY USING RACK & PINION MECHANISM

ELECTRICITY GENERATING DANCE FLOOR BY USING RACK & PINION MECHANISM
MECHANICAL COMPARATORS

MECHANICAL COMPARATORS
ACTUATOR. An actuator is a type of motor for moving or controlling a mechanism or system. It is operated by a source of energy, usually in the form of.

ACTUATOR. An actuator is a type of motor for moving or controlling a mechanism or system. It is operated by a source of energy, usually in the form of.
HYDRAULICS & PNEUMATICS

HYDRAULICS & PNEUMATICS
MECHANISM Exit Next Page Pulleys 1 Rotary cams 1 Gears 2

MECHANISM Exit Next Page Pulleys 1 Rotary cams 1 Gears 2
COMPARATORS Introduction:

COMPARATORS Introduction:
 A complex machine is any machine made up of two or added simple machines. A simple machine is an elementary machine for making work easier. They modify.

 A complex machine is any machine made up of two or added simple machines. A simple machine is an elementary machine for making work easier. They modify.
Hydraulic and Pneumatic Transmission

Hydraulic and Pneumatic Transmission
COMPARATORS. (i) In mass production, where components are to be checked at a very fast rate. (ii) As laboratory standards from which working or inspection.

COMPARATORS. (i) In mass production, where components are to be checked at a very fast rate. (ii) As laboratory standards from which working or inspection.
Motion Transformation Systems Function, Components, and Use.

Motion Transformation Systems Function, Components, and Use.
Level 2 Unit 4 Producing Engineering Solutions Engineering Diploma Level 2 Unit 4 Producing Engineering Solutions An Approach to Unit Delivery and Assessment.

Level 2 Unit 4 Producing Engineering Solutions Engineering Diploma Level 2 Unit 4 Producing Engineering Solutions An Approach to Unit Delivery and Assessment.
Workforce On-Line Manufacturing Skills Pathways

Workforce On-Line Manufacturing Skills Pathways

Similar presentations

Ads by Google