1. Technol MH / MIS / MS / ML98 Technol MH, MIS, MS and ML98 are derived from Fully Hydrogenated Castor Oil that was developed and manufactured for the raw material, especially for the cosmetics. Castor Oil has unique structure. It has 3 hydroxyl groups in the molecule (and 1 ether bond). Due to this unique structure and high safety characters, Castor Oil is well known and used as raw material for the cosmetics for a long time. It is perform high viscosity and get to fit the pigment and dye. We apply unique characters of Castor Oil to Technol MH, MIS, MS and ML98 and developed from the following viewpoints; Improve the character of hydrogenated castor oil. Hydrogenated Castor Oil is stable to oxidation. But too hard and easy to crystallization. Castor Oil has unique structure.

2. Technol MH / MIS / MS / ML98 Character High Polarity Oil High Stability to Oxidation Application Glossy, semitransparent paste High dispersion force of pigment Increase rich feeling to cream Increase gloss Foundation Hair pack

3. Technol MH INCI NAMEHydrogenated Castor Oil Hydroxystearate JCID (Japan)508125 CAS No. - EINECS No. - Technol MIS INCI NAMEHydrogenated Castor Oil Isostearate JCID (Japan)505014 CAS No. - EINECS No. - Technol MS INCI NAME Hydrogenated Castor Oil Stearate JCID (Japan)504201 CAS No. - EINECS No. - Technol ML98 INCI NAME Hydrogenated Castor Oil Laurate JCID (Japan)- CAS No.85711-76-8 EINECS No. 288-338-7 Types

4. Structure Technol MH Hydrogenated Castor Oil Hydroxystearate 12-Hydroxystearic acid

5. Structure Technol MIS Hydrogenated Castor Oil Isostearate Isostearic acid

6. Structure Technol MS Hydrogenated Castor Oil Stearate Stearic acid

7. Structure Technol ML98 Hydrogenated Castor Oil Laurate Lauric acid

8. Specification Trade NameTechnol MHTechnol MISTechnol MSTechnol ML98 Appearance Pale Yellow Paste Slightly Smell Acid Value6.0Max Saponification Value 175.0-195.0 190.0-210.0 Hydroxyl Value 100.0-130.070.0-95.0 Iodine Value10.0Max8.0Max Melting Point( ℃ ) -43.0-48.040.0-55.0- Heavy Metal20ppmMax Arsenic2ppmMax Residue on Ignition (%) 0.50Max0.10Max0.5Max Loss on Drying (%) 2.0Max1.0Max 2.0Max Package Net 16kg Tin Can

9. Physical Characteristics Trade NameTechnol MHTechnol MISTechnol MSTechnol ML98 Index of Refraction (60 ℃ ) 1.4541.4531.4511.450 Viscosity (mPa ・ s ， 60 ℃ ) 190118124109 Specific Gravity (80 ℃ ) 0.8980.8920.8970.904

10. Viscosity & Refractive Index

11. Hydration Force Dropping refined water to 10 grams of controls and knead. When refined water does not into controls, it is the end point. And indicates by percentage to controls.

12. Dispersion Force Of Pigment ← Good Bad → Dropping controls(*1) to 3 grams of powder pigment(*2) and stir by spatula. When as a whole of materials turn into lump (cake), it is the end point. And indicates by percentage to powder pigment. *1 : Blanc Technol MH, MIS, MS and ML98 or mixture by even MH (or MIS or MS or ML98) liquid paraffin. *2 : Zinc Oxide MZO-25

13. Dispersion Force Of Pigment ← Good Bad → Dropping controls(*1) to 3 grams of powder pigment(*2) and stir by spatula. When as a whole of materials turn into lump (cake), it is the end point. And indicates by percentage to powder pigment. *1 : Blanc Technol MH, MIS, MS and ML98 or mixture by even MH (or MIS or MS or ML98) liquid paraffin. *2 : Titanium Oxide CR-50

14. Dispersion Force Of Pigment ← Good Bad → Dropping controls(*1) to 3 grams of powder pigment(*2) and stir by spatula. When as a whole of materials turn into lump (cake), it is the end point. And indicates by percentage to powder pigment. *1 : Blanc Technol MH, MIS, MS and ML98 or mixture by even MH (or MIS or MS or ML98) liquid paraffin. *2 : Celicite SE

15. Solubility r.t. : Room temperature S : Soluble D : Dispersion I : Insoluble Test Sample Weight: 5g 10%=10% of MH or MIS or MS or ML98=10%/5g: 90%/5g of Solvents, 1:1=MH or MIS or MS or ML98: Solvents or Oils=50%: 50% Watching solubility at room temperature and heating. (Melting or dissolving point)

16. Oxidation Stability CDM Test ； Measurement equipment used the Rancimat743 and measured it on condition that the temperature of 120 ℃, and air flux 20 L/h. Castor Oil MH MIS MS ML98

17. 谢谢您了