1. How to install an Xbox 360 By Michael Trim

2. Step 1 Position the Xbox where desired and then insert the ‘HDMI Cable/ Component Cable’ into the back of the Xbox in highlighted section. Then insert the other end of the cable into the socket provided on your television.

3. Step 2 Next take the Xbox 360 AC adaptor which consists of two parts: A power pack, which connects to the console and a mains lead which connects to the power pack.

4. Step 3 These two steps are the basic requirements for Xbox installation. There are other additions which would be required for full online play. The wireless adapter consists of a USB wire which plugs into the designated slot, and a clip which allows the adaptor to rest on the edge of the console easily.

5. Step 4 Next the synching of the controller is required to control the system. Primarily you press the search button on the front of the Xbox console. Next the player must hold the synch button on the back of the controller and wait a few seconds for the synching process to complete.