1. Atmospheric Relationships Created By: Mr. Kreeger

2. Homework and Page References Page References Page 487-490, 499-501 Page 487-490, 499-501Homework HW #1- Explain why the maximum temperature in any given day occurs after 12pm and why the minimum temperature occurs after midnight-(1 paragraph) HW #1- Explain why the maximum temperature in any given day occurs after 12pm and why the minimum temperature occurs after midnight-(1 paragraph) HW #2-Do problems 12,13,14 and 15 on page 490 of text HW #2-Do problems 12,13,14 and 15 on page 490 of text HW #2- Using your reference tables find the Dewpoint and relative humidity given the following. WB=22C, DB=10C WB=22C, DB=10C WB=13C, DB=8C WB=13C, DB=8C WB=20C, 18C WB=20C, 18C What do you notice when the about the relative humidity when the temp and dewpoint are close to one another what do you notice when they are further from each other. Draw a graph dipicting this relationship

3. Table of Contents 1.Temperature Variations a. How is temperature affected b. How the atmosphere receives its energy c. Factors that affect temperature 1.Latitude 2.Altitude 3.Closeness to water 2.Moisture Variations 3.Relative Humidity 4.How to determine dewpoint temperature 5.How to determine relative humidity using chart 6.Pressure Variations

4. 1. Temperature Variations All weather is driven unequal heating of the Earth’s surface. (Remember Specific Heat) Heat Energy is responsible for changes in atm variables

5. 1a. How temperature is affected Temp- Affected by intensity and duration of insolation (Incoming solar radiation) Daily and seasonal changes of temp occur b/c amount of incoming solar radiation and outgoing re- radiation is different Daily and seasonal changes of temp occur b/c amount of incoming solar radiation and outgoing re- radiation is different

7. 1b. How the atmosphere receives its energy Recieves energy by: Conduction Conduction Direct Absorption and insolation when light passes through atm. Direct Absorption and insolation when light passes through atm. Reradiation from earths surface  Related to amount of H2O vapor and CO2 in atm. Reradiation from earths surface  Related to amount of H2O vapor and CO2 in atm. Condensation (latent heat) and Sublimation Condensation (latent heat) and Sublimation Isolines connect equal lines of temp  isotherms Isolines connect equal lines of temp  isotherms

8. 1c. Factors that affect temperature 1.Latitude-Higher latitude lower intensity of solar radiation. (why??) 2.Altitude-higher altitude lower temp. (Why??) 3.Closeness to H20- Coastal regions have cooler summer temps and warmer winter temps (Why???) b/c water heats up and cools slower than land. b/c water heats up and cools slower than land.

9. Poll: Compared to the polar areas, why are...

10. Poll: The amount of insolation reflected fr...

11. Poll: On a given day, which factors have th...

12. Poll: The hottest climates on Earth are loc...

13. 2. Moisture Variations Moisture content changes all the time, water can be found in all three phases in atm. Ability to hold moisture is directly related to temp. (warm air- more moisture, cold air-less moisture)

15. 2. Moisture Variations Cont.. When air holds all the water it can at a given temp  saturated (not usually the case) To obtain saturation, more water must be added without changing temp or air must be cooled to dewpoint temp. ( The temp at which condensation occurs), holding all moisture it can at given temp Amount of H2O vapor actually present is called absolute humidity ( Greater absolute humidity greater dewpoint temp)

16. 3. Relative Humidity Comparison between the amount of moisture in the air with the amount moisture the air can hold at a given temp. Ex. If air holding half as much moisture as it could be at a given temp  RH=50% Ex. If air holding half as much moisture as it could be at a given temp  RH=50% If temp rises and moisture content stays the same RH decreases. If temp rises and moisture content stays the same RH decreases. If temp falls and the moisture content stays the same RH increases. If temp falls and the moisture content stays the same RH increases.

17. 3. Relative Humidity Cont RH=(water vapor content/water vapor capacity)x100 Temperature (°C) Saturation mixing ratio (gm/kg)

18. Comparison: N. Minnesota T = -10°C RH = 100% Phoenix Arizona T = 25°C RH = 20% Which air contains more water vapor? Temperature (°C) Saturation mixing ratio (gm/kg)

19. 4. How to determine Dewpoint Temperature Use of a sling pyschrometer Has two thermometers( 1 wet bulb, 1 dry bulb) Wet bulb- water evaporates quickly- lower temp Wet bulb- water evaporates quickly- lower temp Dry bulb-measures air temp Dry bulb-measures air temp Can use a dew point temp chart

20. Dew point Temp chart

21. 4a. Steps in determining dewpoint temp 1.Assume DB=10C, WB=6C, diff=4C 1. Locate dry bulb temp (y axis of chart) 2. Locate diff between WB and DB temp (X axis of chart) 3. Find point where horizontal line from DB reading meets vertical line from diff between WB and DB. That is your dewpoint temp

22. 5. Determining Relative Humidity with Chart Steps are the same as determining as finding dewpoint only diff is you are using a different chart

23. Chart for Relative Humidity

24. Try These… Dry BulbWet BulbR HumidityDPT 26°C20 °C 6 °C5 °C 12 °C8 °C 18 °C17 °C 14 °C 0 °C-3 °C 57% °C 17 °C 86% °C 4 °C 57% °C 4 °C 91% °C 16 °C 100% °C 14 °C 45% °C -9 °C

25. More Difficult... Dry BulbWet BulbR HumidityDPT 21°C19°C 11°C6 °C 17 °C 2°C-3 °C 9°C6.5 °C 70°F60 °F 82% °C 18 °C 45.5% °C -.5 °C 100% °C 17 °C 20% °C -17 °C 69% °C 3.5 °C 52% °C (50 °F) 11 °C (50 °F) °C 21 °C °C 15 °C

26. Try These DBWB Difference DewpointRH -14C-16C 24C10C 12C67% 11C6C 16C71% 8C-14C

27. Determining Cloud Base Altitude Must know both the Dry Bulb Temperature (DB) and the Dewpoint Temperature (DP) Follow the dashed line up the chart this represents the dewpoint and find where it intersects the Solid line which is the dry bulb temperature.

29. Poll: As the dewpoint temperature of a samp...

30. Poll: Which gas in the atmosphere has the m...

31. Poll: An observer measured the air temperat...

32. Poll: What is the relative humidity when th...

33. 6. Pressure Variations Force of weight pushing down on a unit area of a surface is called air pressure or atm pressure. Use a barometer to measure air pressure-tube filed with Hg when air pressure outside rises, increase pressure at base tube rises, avg sea level pressure =30.0 in of Hg 1013.2 mb. Use ESRT to convert between millibars and inches of Hg

35. Try these !!!! Millibars Inches of Hg 1025.0 29.25 977.0 30.31 1013.2

36. 6. Pressure Variations On weather maps isolines called isobars connect = lines of air pressure –show pressure patterns over large areas, pressure interval =4mb Ranges from 960mb to 1050mb

37. Changes in Air Pressure Temperature- warm air is lighter than cold air! Humidity- humid (moist) air is lighter than dry air!! Water vapor (H 2 O) weighs less than the N and O gases that it pushed out Winds are caused by the unequal heating of the atmosphere (remember that temperature causes changes in air pressure)