1. Process Of Reverse Osmosis Plant

2. Feeding Water Source of Water To Filtration System Raw Water Tank
Raw Water Pump
Raw Water Feed Pump: Raw Water pump is used to feed the water to Filtration System at required Pressure from water source.

3. Filtration System From Raw Water Pump To Dosing
Activated Carbon Filter
Pressure Sand Filter
To Dosing
Pressure Sand Filter : PSF consist of FRP / MS / SS Vessel with Frontal Pipe, Multi Port Valve or Conventional Valve, also media layer of Pebbles, Gravels, Cylex, Sand Media. PSF is used for reduction of suspended solids.
Activated Carbon Filter : ACF consist of FRP / MS / SS Vessel with frontal pipe, Multi port Valve or Conventional Valve, & Activated Carbon layer. ACF is used for reduction of organic maters & chlorine.

4. Dosing System From Filtration System To Micron Cartridge Filter
Dosing Systems : Dosing Systems are mainly used for the prevention of Scale formation by using Anti Scalant Chemicals. Other Dosing Systems are Chlorination, De chlorination, PH Dosing, SMBS, Acid Dosing etc…

5. Micron Cartridge Filter
From Dosing System
To High Pressure Pump
MCF: MCF are used to filter out Physical Impurities in micron rating from feed water.

6. High Pressure Pump To Reverse Osmosis Module
From High Cartridge Filter
To Reverse Osmosis Module
High pressure Pump: HPP is mainly used to transfer pre-treated water to RO module at required pressure.

7. Reverse Osmosis Module
Product Water
Product Water Tank
Reject Water Tank
From High Pressure Pump

8. Our Control Panel Volt-Ampere Meter Pressure Gauge
Online Conductivity Meter
Auto-Manual Switch
Product & Reject Flow Meter
Feed Pump Switches
High Pressure Pump Switches

9. RO Applications Boiler Feed water Treatment Food & Beverage
Power Generation Industries
Sea water Desalination
Recycling Industrial Effluent & Domestic Sewage
Pharmaceutical industries
Chemical & Dyes Industries
Pulp & Paper Industries
Drinking Water Application

10. Some of our RO Plants

11. Thank You