1. Team 5 – Zach Jansma, Joe Donohoe, Jason Swatsworth, Breanna “Like Pretty” Dale

2. Desired Objectives Use for a task Suitable for the task Helps manage resource s Technol ogy feasible Possible cost SafetyTotalWeight factors Use for a task – Can it complete the task? 010113.1875 Suitable for the task – How well will it complete the task? 110013.1875 Helps manage resources – Will it use a lot of material? 000011.0625 Technology feasible – Is it possible to make? 111104.25 Possible cost – Is it expensive? 011002.125 Safety – will it hurt people? 010113.1875

3. ComparisonWeight Factor Meteorology- analyzing weather conditions Aerial Photography- pictures from the sky Scenery – Pretty to, like, look at Transportation- Moving other objects Use for a task – Can it complete the task?.18754.751.1875 3.5625 5.9375 Suitable for the task – How well will it complete the task?.18754.751.1875 3.5625 5.9375 Helps manage resources – Will it use a lot of material?.06255.3125 2.125 1.0625 3.1875 Technology feasible – Is it possible to make?.255 1.25 3.755 1.253.75 Possible cost – Is it expensive?.1253.375 1.125 3.3752.25 Safety – will it hurt people?.18755.9375 3.5625 5.93752.375 Total 4.3751.93753.75 3.4375

4. Designed Features Box kite – High lift Dopero kite – Reliable, Stable Wind Turbine kite – Flies in low wind conditions Foil kite – Larger kite, used for transportation Use for task – Can it fly? 5555 Sustainability – will it be able to fly multiple times 5454 Resource management- will it take a lot of material to make? 4233 Feasibility – Can we actually make this kite? 5342 Cost –Will it cost a lot? 3342 Safety – will it hurt people? 4333 Total Score 26202419

5.  We Chose the Box Kite Design based off of our matrices

6.  Both sails are  9 inches tall  1 foot wide x 1 foot deep  The entire structure is 12 x 12 x 31.5 inches tall  There is a 13.5 inch gap between the sails.

7.  Wooden rods were used to create the skeleton of the kite.  Plastic was used to make the sail.  Twine was used for the line.  The joints were connected by electrical tape.

9.  Kite was too heavy  We adjusted string position  We removed weight by cutting out 3 of the 4 center supports.

11.  We are proud to be  And our kite

12.  http://www.stormthecastle.com/how-to- make-a/images/boxkite2.jpg http://www.stormthecastle.com/how-to- make-a/images/boxkite2.jpg