1. How to print! Different types of monsters.

2. Materials 1.Tracing Paper 2.Styrofoam 3.Glass Pallet. 4.Spatula 5.Different colored Ink

3. Materials 6. Roller 7. Blunt Pencil 8. A3 paper. 9.Newspaper to cover table. 10. Drying rack. 11. (additional) Apron.

4. Create Your Monster! Create your monster on your tracing paper. Make sure it describes you in some way, and use textures.

5. Tracing onto Styrofoam! Trace a small part of the monster onto the styrofoam. And make sure it is traced well.

6. Table stuff Find a spot you want to do your printing. And put newspaper on it. To stop it from getting colored. Make sure the spot has a flat surface.

7. Ink! Choose whatever color you want, and place it onto the glass pallet and roll it until it becomes tacky. And then roll it onto the styrofoam.

8. Printing. And Then paste the styrofoam onto the a3 paper, turn it over and gently rub it for a while by applying heat from your palms. After a while, peel off the styrofoam off the a3 paper.

9. Drying & Washing Leave it to dry, and make 3 more of these, but with different colors. But you have to wash the Styrofoam, and dry the Styrofoam PROPERLY!

10. 2 nd layer. After they dried up, you have to add more parts to your monster on your styrofoam, off the tracing sheet. And then ink the styrofoam, and print it onto the A3 paper, make sure it is accurately placed onto the paper.

11. 3rd Repeat it on the rest of the A3 papers. And then leave them to dry. After they have dried, you have to finish your monster on the styrofoam, and you have to add a bit of background textures. Print it onto the A3 Papers and dry them.

12. 4th After they have dried, add more background onto the styrofoam sheet, and print your final layer with different colors. Dry them up, and see what they look like.