1. Motor Air Vehicle Group 1 Jacky, Osama, Eddy, Abdul, Michael, Serge

2. Objective Our objective is to build a motor air vehicle that can sustain flight for five minutes and complete several figure 8 loops during that time.

3. Parts and costs

4. GSW slowstick – 28$ 6 channel radio receiver and transmitter – 32$ Brushless motor – bought on sale for 18.50$ Battery pack – 6$ Shipping is free through amazon We have not yet found the cost of the parts that will be made by the 3D printer but believe that in total it will be around 25$ Created parts will include the camera mount as well as any parts we wish to modify Total cost of plane will be around 106$ Our trainer plane cost 70$ Total money spent = 176$

5. Slow-stick parts

6. Camera Mount

7. Elevator

8. Fuselage

9. Horizontal Stability

10. Leading Edge Wing Support

11. Motor Mount

12. Tail Gear Support

13. Trailing Edge Wing Support

14. Rudder

15. Vertical Stabilizer

17. Test Flying the Trainer

20. Observations about the trainer Very light weight Hard to fly in any wind Fairly easy to control Easily breakable Parts disconnect easily Battery pack does not stay attached to plane