1. Five Objects x Five Materials YANGSEUB LIM

2. Le Ban Rose Gold Ring Material : 14k Rose Gold Plated Size : 2.786 x / 1.21 y /2.528 z (Cm) 1.097 x / 0.476 y / 0.995 z (Inch) Material Volume : 1.7667 cm 3 Machine Space : 6.7394 cm 3 USPS First-Class Shipping Est. Delivery: Nov 17 - Nov 19 Cost : 68.87 USD Printed by Shapeways How it's 3D printed Precious Plated Metal models are fabricated using a complex seven-step process. First, the model is printed in wax using a specialized high-resolution 3D Printer. It is then put in a container where liquid plaster is poured in around it. Once the plaster sets, the wax is melted out in a furnace, and the remaining plaster becomes the mold. Molten brass is poured into this mold and set to harden. The plaster is broken away, and your product is carefully cleaned and hand polished. Each product goes through two plating steps - first a layer of palladium is applied to provide strength and durability. Then your selected precious metal plating provides the finishing touch.

3. Architectural VASE Material : Gloss White Porcelain Size : 6.56 x / 14.89 y / 6.318 z (Cm) 2.583 x / 5.862 y / 2.487 z (Inch) Material Volume : 174.9729cm 3 Machine Space : 305.9752cm 3 USPS First-Class Shipping Est. Delivery: Nov 17 - Nov 19 Cost :48.39 USD Printed by Shapeways Process Cleaning excess powder from the 3D printed molds is our biggest limitation in manufacturing porcelain. The mold is an inverse of the product itself, where solids of the product are empty space. Laser sintering the mold leaves its interior full of loose powder. We carefully blow it out with compressed air through the flat base of the model, but tight cavities far from the base opening are hard or impossible to clean. This means that models which are complex and have multiple holes in walls or long wires become increasingly hard to print. If you need to troubleshoot, try making the model solid and based on a single "core". Because of the molding process, some surfaces may contain seam lines and marks from the funnel. We do our best to repair the surface of the model but because this is done manually there may be some trace memory of these marks left on the surface.

4. CookieCutter Material : White Strong & Flexible Size : 5.376 x / 3.148 y / 5.778 z (Cm) 2.117 x / 1.239 y / 2.275 z (Inch) Material Volume : 4.4802cm 3 Machine Space : 67.6351cm 3 USPS First-Class Shipping Est. Delivery: Nov 4 - Nov 6 Cost : 23.90 USD Printed by Shapeways How it's 3D printed To print in this material, we start with a bed of nylon powder and sinter the powder with a laser layer by layer, solidifying the powder as we go. Because of this layer by layer process, some products may see a staircase effect. How much you see this effect depends on how your model is oriented in the print tray. Our production planners are working hard to orient models optimally to ensure efficient and good lookin' trays.

5. Phrase Material : Frosted Detail Plastic Size : 4.066 x / 0.37 y / 0.932 z (Cm) 1.601 x / 0.146 y / 0.367 z (Inch) Material Volume : 0.5305 cm 3 Machine Space : 2.1012 cm 3 USPS First-Class Shipping Est. Delivery: Nov 12 - Nov 14 Cost : 14.34 USD Printed by Shapeways Look and Feel Frosted Ultra Detail and Frosted Extreme Detail are both made of a UV cured acrylic polymer. While both offer high resolution, Frosted Extreme Detail uses a 16 micron layer height to produce incredibly fine features, making it a great choice for miniatures, model trains, and products with very fine embossed or engraved details. Both materials are well suited for painting, and are relatively brittle, especially when features are thin. The material is heat resistant up to 80°C / 176°F degrees.

6. Knob Material : Metallic Plastic Size : 7.054 x / 13.396 y / 7.054 z (Cm) 2.777 x / 5.274 y / 2.777 z (Inch) Material Volume 172.3935cm 3 Machine Space 251.7730 cm 3 USPS First-Class Shipping Est. Delivery: Nov 6 - Nov 9 Cost : 199.89 Printed by Shapeways How it's 3D printed We start with a bed of mixed Nylon Plastic and Aluminum powder. We sinter the powder with a laser layer by layer, solidifying the powder as we go. Because of this layer by layer process, some models may see a staircase effect. How much you see this effect depends on how your model is oriented in the print tray. Our production planners are working hard to orient models optimally to ensure efficient and good lookin' trays. We also offer Polished Metallic Plastic, which is a smoother version of Metallic Plastic. This material is great for jewelry or anything that needs a futuristic look. It gives your model a matte metallic-like finish at a lower price than our Stainless Steel and Silver materials.