1. 1 Standardisation, Assessment, and Certification Legal Framework, Standards  Measurement Instrument Directive (2004/22/EC)  Interoperability Directive Rail (2008/57/EC) + TSI Loc&Pas  EN 50463, Nov. 2007  prEN 50463, Jan. 2011 Hendrik de Bonte KEMA Rail Transport Certification

2. Conformity Assessments TSI Loc&Pas (TSI CR RST):  Assessment leads to Certificate of Conformity for subsystem RST  Assessment of “part” Energy Measuring Function only leads to Intermediate Statement (of) Verification.  MID: Notified Body  TSIs, related to IOD Rail: Notified Body  EN 50463, voluntary domain: Notified Body or other party; not (yet) a harmonised standard, but expected to become harmonised TSI Loc&PasEMF EN 50463 EMF

3. Validity, Acceptance  An EC Certificate (or ISV), issued by a Notified Body is valid in all Member States of the EU [quote]  Compliance with EN 50463 may be Cross-Accepted in different Member States, especially along corridors in Trans European Network.  Retrofitting of Energy Measuring Function on existing trains requires NoBo assessment and, depending on Member State’s National Safety Authority’s opinion, renewal of Authorisation to Place in Service  Reverification: through track access contract between IM and RU? TSI ENE: If an electric energy consumption measuring equipment is installed, it shall be compatible with CR LOC&PAS TSI clause 4.2.8.2.8. This equipment can be used for billing purposes and the data provided by it shall be accepted for billing in all Member States.

6. Harmonised standards, remain voluntary  EN 12663:within the limits of the scope of this standard, a presumption of conformity with the corresponding Essential Requirements of that Directive Table ZA.1 — Correspondence between this European Standard, the HS RST TSI dated June 2006 and adopted by EC on 21 February 2008 and Directive 2008/57/EC  EN 50463: This draft European Standard has been prepared under mandate M/334 given to CENELEC by the 19 European Commission and the European Free Trade Association and covers essential requirements of 20 EC Directives MID (2004/22/EC) and RAIL (2008/57/EC). within the limits of the scope of EN 50463, a presumption of conformity with the corresponding Essential Requirements of the IOD Rail.