1. Laboratory 7: Sensors

2. Overview Objective Background Materials Procedure Report / Presentation Closing

3. Objectives Design two sensor programs –ROBOLAB: use sensors to stop a motor when a yellow brick is detected –LabVIEW: use a thermocouple to measure temperature in a heating and cooling program Apply sensors to Semester-Long Design Projects

4. Concept : Control Systems Control system –System created to read and analyze data –Use analyzed data for appropriate action –Examples: Thermal controls Lighting systems Alarm systems Motion sensors

5. Concept: Sensors Sensors Read data from test environment Data converted to digital format for computer Some sensor types: Light Temperature Motion Touch Sensors connect to different control devices: Lego sensors -> RCX Thermocouple -> DAC -> PC

6. Materials ROBOLAB sensor program –RCX –Light sensor assembly Teams share assembly Write individual RCX programs –Computer with ROBOLAB Program RCX LabVIEW sensor program –Computer with LabVIEW + DAC –Thermocouple

7. Procedure: ROBOLAB Sensor Program Design ROBOLAB program to: –Move light sensor on light sensor assembly back and forth using motor –Stop motor when yellow brick is detected –Reverse motor direction when moving light sensor is at end of travel (detected by touch sensor)

8. Procedure: LabVIEW Sensor Program Design (based on VI from LabVIEW Lab) –Back Panel – Add “AI Sample Channel.vi” Name the channel “thermocouple” –Receives input from thermocouple Change thermometer to indicator –Display input Testing and Data –Insert thermocouple wires Yellow wire -> Pin 3 of DAC Orange wire -> Pin 4 of DAC –Have TA test your program –Take screenshot of Front and Back Panels

9. Assignment: Report/Presentation No report for this lab No Presentation for this lab Milestone 2 due next recitation

10. Closing Have all lab notes signed by TA Each team member should have turn using software Return all unused materials to TA