Download presentation
Presentation is loading. Please wait.
Published bySheena Brown Modified over 9 years ago
1
Jewelry box By: Byran Tavon Lee PLTW Mr. Yates January 9, 2009
2
Introduction The purpose of this particular project was to challenge our engineering abilities to build a presentable Jewelry Box. The purpose of this particular project was to challenge our engineering abilities to build a presentable Jewelry Box. This jewelry box had to be made of 2 machinable wax with a dimension of 3 by 2 by.75. This jewelry box had to be made of 2 machinable wax with a dimension of 3 by 2 by.75. This jewelry box first had to be designed on inventor and transferred to EdgeCam to receive its G&M codes. This jewelry box first had to be designed on inventor and transferred to EdgeCam to receive its G&M codes. Finally we used the G&M codes to cut the block out on the CNC machine. Finally we used the G&M codes to cut the block out on the CNC machine.
3
Jewelry Box Top Projected View
4
Jewelry Box Bottom Projected View
5
EdgeCam Top
6
EdgeCam Bottom
7
CNC Base Top
8
CNC Base Bottom
9
Top and Bottom
10
Conclusion With this project I learned how to use inventor and EdgeCam together to design different things. My project didn’t really solve the problem presented. I say this because my project wasn’t that good looking. The one thing I done well on this project was my design on inventor. The one thing I could have done better was with the EgdeCam process. The one thing I would do different with this project is my design.
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.