1. TOF Preliminary Design and Safety Review Project Management Controls R. L. Brown

2. TOF Project WBS

3. Engineering and Design Controls C-A/BNL institutional Standards will apply (SBMS). Design and Safety reviews. STAR Drawing control standard (STAR Note 106). Change Control (Management Plan).

4. Design Reviews Design reviews will be scheduled by the TOF Project office and will consist of Preliminary Design Review (Hello!), and subsystem Final Design Reviews (in project plan). This PDR sets the baseline of scope for the project. Final design reviews are held prior to subsystem major procurement or fabrication; all action items satisfied. FDR may be brief if there are no fundamental changes in design, schedule, or cost from PDR with action items cleared.

5. TOF Project Plan Fully integrated resource loaded, cost & scheduled plan.

6. Project Milestones Reportable milestones are found in Table 3 of the TOF Management plan and are derived directly from the TOF Project Plan.

7. Project Contingency Risk is a function of the following factors: The sophistication of the technology, the maturity of the design effort, the accuracy of the cost sources and the impact of delays in the schedule. Risk analysis shall be performed for each WBS element at the lowest level estimated. Results of this analysis will be related to a contingency which shall be listed for each WBS element. The goal is to make the method of contingency determination uniform amongst all project WBS elements. Details of analysis covered in Management Plan. Money is held and dispersed by BNL Project Oversight Manager (Ludlam) based on level of change approval.