1. The Transport System Transport oxygen, nutrients, and other substances throughout the body Removes waste from tissues

2. The Heart Myocardium Myocardium – heart muscle Pumps blood through the circulatory system Designed as a pair of side-by-side pumps

3. The Heart The heart is divide into 4 chambers Atrium – Receives blood Ventricle – Pumps blood out of the heart

4. Blood Flow From the heart: Blood enters a large artery To smaller artery branches To arteriole (smallest artery) To a capillary bed To a venule (smallest type of vein) To larger veins To a large vein which takes blood back to the heart to be pumped out once again

5. Blood Flow Through the Heart Blood from the body enters the heart through the right atrium, then to the right ventricle Pulmonary Circulation – blood picks up oxygen and releases carbon dioxide Blood from the lungs enter through the left atrium Systemic Circulation – flow of blood from the heart to the rest of the body Aorta – the artery that emerges from the heart

6. Blood Flow Through the Heart

7. Valves – flaps of connective tissue located between the atria and the ventricles When blood moves from the atria to the ventricles those valves open When the ventricles contract valves close

8. Pulmonary Circulation Blood cell enters the Right Atrium Blood cell is deoxygenated Atrio-ventricular ValveAfter blood pools in the Right Atria it flows through the Right Atrio-ventricular Valve to the Right Ventricle Right Atria contracts to push remaining blood out to the Right Ventricle Once the volume of blood accumulates in the Right Ventricle it contracts During contraction the AV valve closes to prevent backflow Semilunar ValveBlood pressure in the Right Ventricle opens the Right Semilunar Valve allows blood to enter the pulmonary artery

9. Pulmonary Circulation Blood enters a lung continues to move along smaller and smaller arteries Arteriole – the smallest of arteries Arteriole leads to a capillary bed Capillaries walls are one cell think which allows for gas transfer Blood cell gives up carbon dioxide and takes a oxygen molecule Blood cell returns to the heart Pulmonary veins take the now oxygenated blood back to the heart

10. Systemic Circulation The same red blood cell example used in the pulmonary circulation is used here. Blood enters the Left Atria and in unison with the right atria blood seeps to the left ventricle Both atria contract, blood enters ventricles (in this example Left Ventricle through the Atrio-ventricular valve) Notice the Left Ventricle is thicker than the Right VentricleLeft Ventricles contract (Notice the Left Ventricle is thicker than the Right Ventricle) When this occurs Atrio-ventricular valve closes to prevent backflow Increase in blood pressure in the Left Ventricle opens the semilunar valve and allows blood through the aorta Blood leaves the heart through the aorta

11. Systemic Circulation Blood then goes into one of 2 pathways 1.Through the body system eventually to capillary beds to pass on oxygen and nutrients

12. 2. The Hearts Blood Supply

13. Circulation For the record: Blood is never Blue! Blue represent deoxygenated blood: NO IT IS NOT BLUE!!! More like a dark verses a bright red

14. Control of Heart Rate Cardiac Muscle – muscle tissue specifically located in the heart Myogenic Activity – the ability of cardiac muscle to contract and relax without nervous system control This myogenic activity needs to be controlled in order to keep the timing of the contractions to be unified and useful

15. Control of Heart Rate Sinoatrial Node (SA Node) Mass of tissue within the Right Atria This is known as the pacemaker for the heart SA Node sends an electrical signal to initiate contraction to both atria At 72 beats per min that is a signal every.8 seconds

16. Control of Heart Rate Atrioventricular Node (AV Node) Receives signal from SA Node Waits.1 seconds then sends another electrical signal This signal goes to the ventricles So first the Atria contracts then the Ventricles

17. Heart Rate Heart Rate varies depending on your bodies needs. During exercise your heart rate could increase to 200 beats per min.

18. Heart Rate Heart rate is controlled as a result of carbon dioxide levels in the blood As carbon dioxide increases an area in the brain stem the medulla chemically senses the levels Medulla sends signal through a cranial nerve (AKA Cardiac Nerve) This increases the heart rate to an appropriate level This signal is sent to the SA Node It does not change the mechanism of how the heart beats just the timing

19. Heart Rate AS CO2 returns to normal a signal is sent for the medulla through the Vagus Nerve to return the heart rate to normal. Adrenaline – a chemical released by your adrenal glands during periods of high stress or excitement. (AKA – Epinephrine) Adrenaline causes the SA Node to fire more frequently, increasing the heart rate

20. Blood Vessels

21. Arteries Large Vessels that carry blood from the heart to the tissues of the body. Pulmonary arteries are the only ones that carry blood poor in oxygen. The rest carry oxygen rich blood They have thick smooth muscle layers used by the autonomic nervous system to change the diameter of the vessel This regulates blood pressure

22. Blood Vessels From the arteries to the arterioles to the capillary bed. Capillary Bed – a network of capillaries that typically all drain into a single venule When blood enters the capillary bed much of the pressure is lost Blood cells make it through the capillaries one cell at a time

23. Blood Vessels Capillaries Smallest Blood Vessels Thin walls allow for oxygen and nutrients to diffuse from the blood to the tissue Also CO2 and waste diffuse from tissue to blood

24. Blood Vessels Veins Returns blood to the heart from the capillaries Blood returns to the heart usually against gravity Skeletal muscle help “push” blood towards the heart. Valves prevent back flow Blood pressure is low causing blood flow to be slow

25. Components of Blood Plasma – liquid portion of blood Erythrocytes – red blood cells Leucocytes – white blood cells (phagocytes and lymphocytes) Platelets – cell fragments (assists in blood clotting)

26. Transport by Blood Nutrients – glucose, amino acids, etc Oxygen – reactant for aerobic cell respiration Carbon Dioxide – waste produce of aerobic cell repiration Hormones – transported from gland to target cells Antibodies – protein molecules involved in immunity Urea – nitrogenous waste (filtered out of the blood by the kidneys’s) Heat – Skin arterioles (can change diameter in order to gain or lose heat)

27. Blood Pressure When the heart contracts it produces a wave of fluid pressure in the arteries Pressure decreases when the heart relaxes System still remains under pressure due to elasticity of the arteries Pressure allows blood to continue to flow through the arteries.

28. Blood Pressure Sphygmomanometer Device that measures blood pressure Typical blood pressure in a healthy adult is 120/80 Top Number: Systolic Bottom Number: Diastolic

29. Blood Pressure Lab Record in your composition book Step 1 - Choose the right equipment: 1. A quality stethoscope 2. An appropriately sized blood pressure cuff 3. A blood pressure measurement instrument such as an aneroid or mercury column sphygmomanometer or an automated device with a manual inflate mode. Step 2 - Prepare the patient: Make sure the patient is relaxed by allowing 5 minutes to relax before the first reading. The patient should sit upright with their upper arm positioned so it is level with their heart and feet flat on the floor. Remove excess clothing that might interfere with the BP cuff or constrict blood flow in the arm. Be sure you and the patient refrain from talking during the reading.

30. Blood Pressure Lab Step 3 - Choose the proper BP cuff size: Most measurement errors occur by not taking the time to choose the proper cuff size. Wrap the cuff around the patient's arm and use the INDEX line to determine if the patient's arm circumference falls within the RANGE area. Otherwise, choose the appropriate smaller or larger cuff. Step 4 - Place the BP cuff on the patient's arm: Palpate/locate the brachial artery and position the BP cuff so that the ARTERY marker points to the brachial artery. Wrap the BP cuff snugly around the arm. Step 5 - Position the stethoscope: On the same arm that you placed the BP cuff, palpate the arm at the antecubical fossa (crease of the arm) to locate the strongest pulse sounds and place the bell of the stethoscope over the brachial artery at this location.

31. Blood Pressure Lab Step 6 - Inflate the BP cuff: Begin pumping the cuff bulb as you listen to the pulse sounds. When the BP cuff has inflated enough to stop blood flow you should hear no sounds through the stethoscope. The gauge should read 30 to 40 mmHg above the person's normal BP reading. If this value is unknown you can inflate the cuff to 160 - 180 mmHg. (If pulse sounds are heard right away, inflate to a higher pressure.) Step 7 - Slowly Deflate the BP cuff: Begin deflation. The AHA recommends that the pressure should fall at 2 - 3 mmHg per second, anything faster may likely result in an inaccurate measurement.

32. Blood Pressure Lab Step 8 - Listen for the Systolic Reading: The first occurence of rhythmic sounds heard as blood begins to flow through the artery is the patient's systolic pressure. This may resemble a tapping noise at first. Step 9 - Listen for the Diastolic Reading: Continue to listen as the BP cuff pressure drops and the sounds fade. Note the gauge reading when the rhythmic sounds stop. This will be the diastolic reading.

33. Blood Pressure Lab Step 10 - Double Check for Accuracy: The AHA recommends taking a reading with both arms and averaging the readings. To check the pressure again for accuracy wait about five minutes between readings. Typically, blood pressure is higher in the mornings and lower in the evenings.