Presentation is loading. Please wait.

Presentation is loading. Please wait.

Introduction to Engineering Camera Lab #4 – 3 Task #2 Agenda Review Task #2 procedure Conduct Task #2 Work on lab report.

Published byBrook Gilmore Modified over 9 years ago

Similar presentations

Presentation on theme: "Introduction to Engineering Camera Lab #4 – 3 Task #2 Agenda Review Task #2 procedure Conduct Task #2 Work on lab report."— Presentation transcript:

1 Introduction to Engineering Camera Lab #4 – 3 Task #2 Agenda Review Task #2 procedure Conduct Task #2 Work on lab report

2 Task #2 Procedure Summary Connect test box to scope  Channel 1 ONLY Adjust display start time Set trigger level Turn test box power ON Trigger the flash Turn test box power OFF Collect data

3 IMPORTANT SAFETY REMINDER DO NOT LOOK INTO TEST BOX WHEN PUSHING THE FLASH BUTTON!

4 Assignment In Class:  Be sure all team members have Task #2 data  Make/Check calculations  Answer questions about Task 2 in “Report Instructions”  Plan Camera Lab #4 report  Review Task 3 procedure

Download ppt "Introduction to Engineering Camera Lab #4 – 3 Task #2 Agenda Review Task #2 procedure Conduct Task #2 Work on lab report."

Similar presentations

Let’s Play! Instructions. 12345 678910 12 Team Score.

Let’s Play! Instructions Team Score.
The UTE Speed-O-Calibration Unit (SOC) is used to calibrate the locomotive speedometer. This presentation is an operations outline for Ultra-Tech model.

The UTE Speed-O-Calibration Unit (SOC) is used to calibrate the locomotive speedometer. This presentation is an operations outline for Ultra-Tech model.
1 Lab #9 AC Circuits Activity #1 – Simulating a Low Pass Circuit Activity #2 – Building & Testing a Low Pass Circuit Activity #3 – Comparison of 3 methods.

1 Lab #9 AC Circuits Activity #1 – Simulating a Low Pass Circuit Activity #2 – Building & Testing a Low Pass Circuit Activity #3 – Comparison of 3 methods.
Introduction To Engineering Camera Lab #1 - 1. What We’ll Do Today: Receive team assignments Take some photos with the camera for use in Labs 2 and 3.

Introduction To Engineering Camera Lab # What We’ll Do Today: Receive team assignments Take some photos with the camera for use in Labs 2 and 3.
RECRUITER CAMPAIGNS 101 HOW TO SET UP CAMPAIGNS FOR BEGINNERS Angela Skjeie Pacific University Oregon July 30, 2015 Enrollment & Student Services Track.

RECRUITER CAMPAIGNS 101 HOW TO SET UP CAMPAIGNS FOR BEGINNERS Angela Skjeie Pacific University Oregon July 30, 2015 Enrollment & Student Services Track.
Should be on Up to hear patient button presses Down to mute. In either case the #1 and #2 lights should light with each button press. Leave the 5 to the.

Should be on Up to hear patient button presses Down to mute. In either case the #1 and #2 lights should light with each button press. Leave the 5 to the.
 We are going to design an experiment to test paper airplane flight distance.  We need to think about how we are going to design and perform the experiment.

 We are going to design an experiment to test paper airplane flight distance.  We need to think about how we are going to design and perform the experiment.
Implementing ISO 9001 Our project plan Copyright ©2008 The 9000 Store.

Implementing ISO 9001 Our project plan Copyright ©2008 The 9000 Store.
#68 Evolution Unit Review #68 Evolution Unit Review #80 Scientific Method REVIEW #80 Scientific Method REVIEW Agenda: Warm Up 8 min Minilesson 20min Activity.

#68 Evolution Unit Review #68 Evolution Unit Review #80 Scientific Method REVIEW #80 Scientific Method REVIEW Agenda: Warm Up 8 min Minilesson 20min Activity.
STEM 2014-2015 Mr. Matteis.

STEM Mr. Matteis.
Let’s do science!. Agenda 1.Introduction 2.Objectives & Purpose 3.Homework 4.Journal Set-up.

Let’s do science!. Agenda 1.Introduction 2.Objectives & Purpose 3.Homework 4.Journal Set-up.
On a half sheet of paper answer the following in complete sentences: 1. What is the difference between distance and displacement? 2. Compare and contrast.

On a half sheet of paper answer the following in complete sentences: 1. What is the difference between distance and displacement? 2. Compare and contrast.
Introduction to Engineering Camera Lab #3 - 1 Agenda Do parts I and II of the lab Record data Answer questions.

Introduction to Engineering Camera Lab #3 - 1 Agenda Do parts I and II of the lab Record data Answer questions.
Laboratory 1: Introduction to Microsoft Word, Excel, and PowerPoint General Engineering Polytechnic University.

Laboratory 1: Introduction to Microsoft Word, Excel, and PowerPoint General Engineering Polytechnic University.
Introduction To Engineering Camera Lab #2 - 1 Agenda Shutter Mechanism Review basic statistical methods Opening the camera case Measure flash duration.

Introduction To Engineering Camera Lab #2 - 1 Agenda Shutter Mechanism Review basic statistical methods Opening the camera case Measure flash duration.
Image Downloading Instructions General Instructions.

Image Downloading Instructions General Instructions.
Circuits Lab Introduction

Circuits Lab Introduction
MGS 351 Introduction to Management Information Systems RECITATION 8.

MGS 351 Introduction to Management Information Systems RECITATION 8.
Introduction to Engineering Camera Lab #4 – 1 Introduction.

Introduction to Engineering Camera Lab #4 – 1 Introduction.
Lab Team Jobs Why have specific jobs? Can one person do all the jobs well?

Lab Team Jobs Why have specific jobs? Can one person do all the jobs well?

Similar presentations

Ads by Google