1. Trend Micro ServerProtect For Linux

2. System Requirements Hardware(For 1.3, 1.25, 1.2) –Intel™ Pentium™ II processor (or higher) or AMD™ Athlon™ processor – 128MB RAM or more – 25MB of available disk space for the /opt directory – 8MB of available disk space for the /tmp directory Supported distributions and kernels –Red Hat Enterprise Linux (AS, ES, WS) 2.1 1.25 Note : ServerProtect in kernel-independent mode is the mode supported for these distributions. Therefore, only manual and scheduled scanning is available. –Red Hat Enterprise Linux (AS, ES, WS) 3.0 1.3 2.4.21-4.EL smp 2.4.21-4.EL up 2.4.21-9.0.1.EL smp 2.4.21-9.0.1.EL up Note :For other kernels and distributions, refer to the following Web site for additional information: www.trendmicro.com/en/products/file-server/sp-linux/use/kernel.htm www.trendmicro.com/en/products/file-server/sp-linux/use/kernel.htm

3. –SUSE LINUX Enterprise Server 1.2 SUSE LINUX Enterprise Server 8 for z/Linux - 2.4.19-3suse IBM S/390 – IBM S/390 Multiprise 3000 Enterprise Server (MP3000) 7060 – IBM Parallel Enterprise Server G5 (G5) 9672 – IBM Parallel Enterprise Server G6 (G6) 9672 – IBM zSeries – - IBM eServer zSeries 800 (z800) 2066 –- IBM eServer zSeries 900 (z900) 2064 –Turbolinux 10 Server 2.6.8-1 up 2.6.8-1 smp –Asianux 1.0 2.4.21-9.30AX up 2.4.21-9.30AX smp –Miracle Linux 2.1 2.4.9-31.22ml up 2.4.9-31.22ml smp

4. Supported Web browsers for ServerProtect Web console –Microsoft™ Internet Explorer 5.5 with Service Pack 2 or higher – Mozilla 1.4 or higher –Note: Install Sun Micro™ Java™ 2 Runtime Environment 1.4.2_01 when using Mozilla to access ServerProtect Web console. Otherwise, product registration and access to the ServerProtect online help will not work. – Note : The libgcc-3.2.2-5.i586.rpm (or above) package should be installed. Otherwise, accessing the ServerProtect Web console via a Mozilla browser will not work. Supported XWindow graphical desktop environments for simple GUI console –KDE 2.2.2-2 or higher

5. Install 解開 splx-redhat-v13.gz tar –zxvf splx-redhat-v13.gz

6. 解開 splx-redhat-v13.gz 可以看到下列檔案 SPLX_1.3_GSG_RedHat.pdf SPLX_1.3_README_Redhat.txt SProtectLinux-1.3.RedHat.i686.bin MD5SUM

7. 執行安裝程式./Sprotectlinux1.3.RedHat.i686.bin

8. License Agreement

10. Active Product 可以用 Ctrl + D 放棄啟動 可以繼續安裝

11. 使用 uname –a 找出 Kernel 的版本

12. 下載適當的 Kernel Hook

13. 將下載的 Kernel Hook 解壓，複製到 /opt/TrendMicro/SProtec tLinux/SPLX.module/

14. 將 splx 的服務重新啟動 #Service splx restart

16. Install Complete http://FQDN:14942

17. Verifying Installation After completing the installation, verify that ServerProtect is running optimally. To verify ServerProtect is running optimally, type the following at the command line: –/etc/init.d/splx status –The output should show all running processes, for example: –splxmod module is running... –vsapiapp (pid 3854 3852 3851 3850 3849 3840) is running... –entity (pid 3845 3844) is running... –ServerProtect for Linux core is running –splxhttpd (pid 3869 3868 3867 3866 3865 3864) is running... –ServerProtect for Linux httpd is running If a service appears as "stopped", review the installation process.

18. Removing ServerProtect To remove ServerProtect: –Type the following at the command line: rpm -e SProtectLinux

19. Configuration 不需密碼可直接登入

20. Real-Time Scan

21. Scheduled Scan

22. Manual Scan

23. Exclusion List

24. Quarantine Directory

25. Backup Director

26. Recipents

27. Alert Settings

28. Update

29. Log

30. Administration

31. Registration

32. Thanks