1. Front view LED’s pushed into place Buzzer bolted on Fuse holder bolted on

2. Fitting it together Here is a front and side view showing how the parts fix into place FRONTSIDE VIEW

3. Wiring it up 1. Connect the black wire from the buzzer to the tag and the red wire to the fuseholder 2. Connect the red wire from the battery clip to the other end of the fuseholder and the black wire to the tag. 3. Connect the wires to the LED’s as shown. They have to be linked together – in series. 4. Add the resistor and connect it from the spare leg of the LED to the fuseholder connection – the one with the red buzzer lead attached. All you need to do now is add a battery and test your fuse tester!