Presentation is loading. Please wait.

Presentation is loading. Please wait.

TBL BPMs: electronics Antoni Gelonch, Yuri Kubyshin, Xavier Millán, Gabriel Montoro CTF3 Collaboration MeetingCERN, January 16-17, 2007 In collaboration.

Published byJuliana Lynch Modified over 9 years ago

Similar presentations

Presentation on theme: "TBL BPMs: electronics Antoni Gelonch, Yuri Kubyshin, Xavier Millán, Gabriel Montoro CTF3 Collaboration MeetingCERN, January 16-17, 2007 In collaboration."— Presentation transcript:

1 TBL BPMs: electronics Antoni Gelonch, Yuri Kubyshin, Xavier Millán, Gabriel Montoro CTF3 Collaboration MeetingCERN, January 16-17, 2007 In collaboration with Ángeles Faus-Golfe, Pablo Modesto

2 TBL BPMs: electronics2 BPMs at the TBL ♦ 16 BPMs are planned to be installed at the TBL

3 TBL BPMs: electronics3 H V ∆H ∆V ∑ Inductive pick-up Analog front-end electronics Mechanics IPU electronics Amplifier

4 TBL BPMs: electronics4 General scheme of the analog head electronics Digital (front-end) block Design by M. Gasior

5 TBL BPMs: electronics5 Tentative parameters of the BPMs for the TBL BPM analog bandwidth (BPM with associated electronics) 10 kHz -100 MHz (200 MHz is highly desirable) Beam position range of interest +/-5 mm horizontal and vertical Beam aperture diameter22.5 mm Overall mechanical length< 100 mm Number of BPM’s in TBL 18 Resolution at maximum current <5  m Overall precision <50  m Hans Braun, 24.11.2004 The BPM design for the DBL by M. Gasior cannot be applied directly. Modifications required: a)The dimensions of the BPM (IPU) must be reduced (by a factor of 0.6 approximately) b) The amplifier bandwidth should be broaden up to 200 MHz and attenuator should be added. Typical radiation levels<1000 Gray/year

6 TBL BPMs: electronics6 Work done (I) a) Amplifier design A: schematics, PCB and tests of the 1 channel b) IPU electronics: design and schematics ● Based on a previous design using AD8370. ● Necessary modifications to meet the requirements to the TBL BPMs have been done. ● The IC is not certified to sustain the existing radiation level.

7 TBL BPMs: electronics7 c) Amplifier c) Amplifier design B: PCB routing is in progress (to be finished in 2 weeks). The design accomplishes the following characteristics: –10 kHz -200 MHz bandwidth (to be tested in the lab) –Selectable gain (2 gains) –3 outputs: ΔH, ΔV and Σ –± 2 V output level –Differential or unipolar outputs ??? (TBD) –The amplifier can be used as a analog front-end A new feature: the designed amplifier is able to endure 100 Krads (certified by the IC manufacturer) Work done (II)

8 TBL BPMs: electronics8 Current status Design A  A one-channel prototype has been designed (Design A), built and tested. Required characteristics has been achieved (digitally variable gain and bandwidth up to 750 MHz). Design B  A design of a radiation tolerant version of the amplifier (Design B) has been worked out.  A design of the IPU electronics has been done. The project is carried out with a financial support of the Spanish Ministry of Education and Science.

9 TBL BPMs: electronics9 Schedule ● Build the full version of the amplifier ● Carry out tests of IPU + amplifier - local test - at CERN test bench (?) January-February March-April April-May Many thanks to Louis Bellier, Hans Braun, Steffen Doebert, Domènec Espriu, Marek Gasior, Gunther Geschonke, Lars Soby

10 IPU Electronics

11 TBL BPMs: electronics11 IPU Electronics: schematic

12 TBL BPMs: electronics12

13 TBL BPMs: electronics13

14 TBL BPMs: electronics14

15 Amplifier Electronics

16 TBL BPMs: electronics16 Based on a previous design using AD8370. Prototype A: 1 channel

17 TBL BPMs: electronics17 PCB plot The design has been successfully tested for another application and has shown a good performance. Necessary modifications to meet the requirements to the TBL BPMs have been done. Prototype A: 1 channel

18 TBL BPMs: electronics18 Prototype A: 1 channel Can it endure 100 Krads? …. We need to test it !!!!

19 TBL BPMs: electronics19 Prototype B: 3 channels full schematic

20 TBL BPMs: electronics20 Prototype B: main components Wide-band amplifier IC: THS4508 Positive voltage regulator: RHFL4913 Negative voltage regulator: RHFL7913A ■ All of them sustain 100 Krads according to the manufacturers Note: the full schematic will be available from Gabriel Montoro montoro@tsc.upc.edumontoro@tsc.upc.edu or as a pdf document on the meeting website

21 TBL BPMs: electronics21

22 TBL BPMs: electronics22

23 TBL BPMs: electronics23

24 TBL BPMs: electronics24

25 TBL BPMs: electronics25 We are interested to have a feedback from experts and to cooperate with other groups to validate the developed design B to test the AD8370 IC (design A) under radiation (?) to choose the proper type of: case, connectors and interface (standardization!!!), so that our front-end amplifier can be connected to the digitizer developed by another groups TBD: differential or unipolar outputs

Download ppt "TBL BPMs: electronics Antoni Gelonch, Yuri Kubyshin, Xavier Millán, Gabriel Montoro CTF3 Collaboration MeetingCERN, January 16-17, 2007 In collaboration."

Similar presentations

Experience of the Spanish collaboration with TBL F. Toral on behalf of the Spanish Collaboration with TBL CERN, CTF3 Collaboration Technical Meeting, 6/5/2010.

Experience of the Spanish collaboration with TBL F. Toral on behalf of the Spanish Collaboration with TBL CERN, CTF3 Collaboration Technical Meeting, 6/5/2010.
5/4/2006BAE 54131 Analog to Digital (A/D) Conversion An overview of A/D techniques.

5/4/2006BAE Analog to Digital (A/D) Conversion An overview of A/D techniques.
BPS Location in CTF3/CLEX Area Mechanics with PCB Electronics Test Results BPS Linearity Error A linear fit of the wire test measures was done (left) for.

BPS Location in CTF3/CLEX Area Mechanics with PCB Electronics Test Results BPS Linearity Error A linear fit of the wire test measures was done (left) for.
MICE Electronics Update Mice Target Workshop – Dec 2010 P J Smith James Leaver.

MICE Electronics Update Mice Target Workshop – Dec 2010 P J Smith James Leaver.
S. Smith LCLS Facility Advisory April 16, 2007 1 BPMs and Toroids Facility Advisory Committee April 16, 2007 System overview.

S. Smith LCLS Facility Advisory April 16, BPMs and Toroids Facility Advisory Committee April 16, 2007 System overview.
ATLAS MDT Electronics Status ● ASD Chip Design (with Harvard) and Production – Full Rad-Hard test campaign completed – Production order for 67,400 parts.

ATLAS MDT Electronics Status ● ASD Chip Design (with Harvard) and Production – Full Rad-Hard test campaign completed – Production order for 67,400 parts.
UPC participation in the development of BPMs for the TBL of the CTF3 Yuri Kubyshin WORKSHOP ON THE FUTURE LINEAR COLLIDER Gandía, December 3, 2005.

UPC participation in the development of BPMs for the TBL of the CTF3 Yuri Kubyshin WORKSHOP ON THE FUTURE LINEAR COLLIDER Gandía, December 3, 2005.
Bob Lill Undulator Systems – BPM April 20, 2006 Undulator Cavity BPM Status and Plans.

Bob Lill Undulator Systems – BPM April 20, 2006 Undulator Cavity BPM Status and Plans.
Panda PCB for prototype status report by D Malkevich on behalf of the ITEP group ITEP.

Panda PCB for prototype status report by D Malkevich on behalf of the ITEP group ITEP.
Analog Electronics Lecture 5.

Analog Electronics Lecture 5.
F. Toral CLIC Workshop. 3-11-2011 CIEMAT contribution to CLIC Experimental Verification F. Toral on behalf of Accelerator Technology Group, CIEMAT.

F. Toral CLIC Workshop CIEMAT contribution to CLIC Experimental Verification F. Toral on behalf of Accelerator Technology Group, CIEMAT.
Electronics for PS and LHC transformers Grzegorz Kasprowicz Supervisor: David Belohrad AB-BDI-PI Technical student report.

Electronics for PS and LHC transformers Grzegorz Kasprowicz Supervisor: David Belohrad AB-BDI-PI Technical student report.
1 Ist Virgo+ review Cascina 03.04.2007 H. Heitmann Alignment: Virgo+ changes.

1 Ist Virgo+ review Cascina H. Heitmann Alignment: Virgo+ changes.
Main Board Status MB2 v1 for FATALIC & QIE 10/06/2015Roméo BONNEFOY - LPC Clermont1 Roméo BONNEFOY François Vazeille LPC Clermont-Ferrand.

Main Board Status MB2 v1 for FATALIC & QIE 10/06/2015Roméo BONNEFOY - LPC Clermont1 Roméo BONNEFOY François Vazeille LPC Clermont-Ferrand.
Bob Lill Undulator Systems – BPM January 31, 2006 Undulator Cavity BPM Design and Status.

Bob Lill Undulator Systems – BPM January 31, 2006 Undulator Cavity BPM Design and Status.
K.C.RAVINDRAN,GRAPES-3 EXPERIMENT,OOTY 1 Development of fast electronics for the GRAPES-3 experiment at Ooty K.C. RAVINDRAN On Behalf of GRAPES-3 Collaboration.

K.C.RAVINDRAN,GRAPES-3 EXPERIMENT,OOTY 1 Development of fast electronics for the GRAPES-3 experiment at Ooty K.C. RAVINDRAN On Behalf of GRAPES-3 Collaboration.
CTF3 BPMs October 18-22/2010 IWLC2010 CTF3 BPMs Lars Soby 1.

CTF3 BPMs October 18-22/2010 IWLC2010 CTF3 BPMs Lars Soby 1.
BI day 2011 T Bogey CERN BE/BI. Overview to the TTpos system Proposed technical solution Performance of the system Lab test Beam test Planning for 2012.

BI day 2011 T Bogey CERN BE/BI. Overview to the TTpos system Proposed technical solution Performance of the system Lab test Beam test Planning for 2012.
First results from PADI-2 Mircea Ciobanu CBM Collaboration Meeting March 10 –13, 2009 GSI-Darmstadt FEE1.

First results from PADI-2 Mircea Ciobanu CBM Collaboration Meeting March 10 –13, 2009 GSI-Darmstadt FEE1.
TBL as a 12 GHz power source, overview and first results from commissioning IWLC 2010 workshopSteffen Döbert, BE-RF  Current status of TBL  Status of.

TBL as a 12 GHz power source, overview and first results from commissioning IWLC 2010 workshopSteffen Döbert, BE-RF  Current status of TBL  Status of.

Similar presentations

Ads by Google