1. 2013.08.07 Dream box with Android HD/HD+ system

2. System Requirement Server H/W requirement – 2GB RAM (On Board 1GB + External/extra 1G RAM) Cable requirement – FUNTORO Mega to RJ-45 Cable – Cable PN : K39-3001096-F68

3. System limitation Max channels – 15 Channels per MOD server Video output quality – Bit rate : less then 5000 kb/s

4. System setting – Dream box Choose one satellite which service in your side Scan channels Dream box IP setting – Android HD/HD+ system dtv_conf.xml Setting autorun-dreambox.sh Setting

5. How to get a workable satellite signal? (1) Setup

6. (1) Service Searching

7. (1) Tuner configuration

8. (1)Tuner A:Alps BSBE2(DCB-S2) not configured

9. (1)Nothing connected

10. (1)Please select right key of the remote control Configuration Mode  Change setting to advanced Satellite  Change setting to ( Local av LNB  Change setting to LNB1

11. Search channels (1)Open “service Searching” page (2)Select Automatic Scan

12. (1)Clear before scan  yes (2)Scan Tuner A (DVB-S2)  yes

13. (1)Press “OK” to start scan channels (as below)

14. Setting Dream Box IP (1)Open “Setup page” (2)Select “System” item

15. (1)Select “Network”

16. (1)Open “Adaptor settings”

17. (1)Use DHCP  no (2)IP address  10.0.0.3 (for first Dream box) Please setting the IP address to 10.0.0.4 when install second Dream box in the system. (3)Netmask  255.0.0.0 (4)Use a gateway  no

19. (1)Massage for Network setting

21. How to get channel list from HTTP? Program list (1)Use RJ45 cable to connect your PC & Dream box. (2)Use browser to open dream box channels setting page “http://10.0.0.3/”

22. (1) Click “Stream AD AI Emarat” i-con (2) Download “ Stream.m3u” file

23. (1)Testing: Use VLC to play “ Stream.m3u” file

24. (1)Check channels IP address what you are playing

25. (1)Channel IP address  http://10.0.0.3:8001/1:0:1:2C3:7:800:C00000:0:0:0:

26. How to add channel list to setting file? There are two setting file as below: (1) dtv_conf.xml (file address is “SSD/funtoro/conf_HD/”) (2) autorun-dreambox.sh (file address is “SSD/funtoro/conf_HD/”)

27. <!-- 1.bestfit 2.fit horizontal 3.fit vertical 4.fillscreen 5.16:9 6.4:3 7.original --> 4 10.0.0.3 10.0.0.4 10.0.0.5 10.0.0.6 Monitor display Mode Parameters of Monitor display # of Dream Box & internal IP Setting dtv_conf.xml

28. ch1 http://10.0.0.1:9918 /opt/data/funtoro/conf_HD/dtv/images/btn_dtv_normal.png /opt/data/funtoro/conf_HD/dtv/images/btn_dtv_select.png Channel list need to mapping with IP & Port of MOD Server 10.0.0.1 is MOD Server IP, it’s Fixed, Port Number is starting from 9918, second is 9919,,,,,etc. Sample is in the attached file in the below:

29. autorun-dreambox.sh Setting echo "STV1“ cvlc -vvv http://10.0.0.3:8001/1:0:1:2C3:7:800:C00000:0:0:0: --sout "#standard{mux=ts,dst=10.0.0.1:9918,access=http}" & sleep 3 channel IP address IP & Port in Server Sample as below: