1. Determination of urine glucose using O-Toluidine 376 BCH Miss Tahani Al-Shehri

2. Introduction Determination of urine glucose is important in the diagnosis of diabetes mellitus.

3. Principle When heated with o-toluidine and glacial acetic acid, glucose reacts with o-toluidine to form N-glycosylamine. This compound has a blue-green colour and its absorbance can be measured at 625 nm.

4. O-toluidine

5. Method 1.Half fill 500 ml beaker with water and put it on the hot plate to boil. 2.Take three clean test tubes and label them: TEST, STANDARD and BLANK. 3. Add in each tube 5 ml o-toluidine (from a burette).

6. Method Cont.. 4.Then, very accurately, pipette: – 0.1 ml urine into the tube labeled TEST. – 0.1 ml standard glucose solution into the tube labeled STANDARD. – 0.1 ml distilled water into the tube labeled BLANK. 5. Shake the tubes and put them in the boiling water for 10 minutes. Remove the tubes, cool them 6.Read the optical densities of the TEST and STANDARD against the BLANK.

7. Calculations The concentration of glucose in the standard solution is 100mg/100ml. The concentration of glucose in urine is given by: O.D. TEST ––––––––––––––  100 = mg Glucose /100ml urine O.D. STANDARD