1. PRIMO SD VINYL TILES & SHEETING_

2.  INTRODUCTION_  BENEFITS_  SUGGESTED SPECIFICATION_  INSTALLATION INSTRUCTIONS_  MAINTENANCE PROCEDURES_  TECHNICAL PROPERTIES_ Primo SD Vinyl Tiles & Sheeting Primo SD is a non-directional, static dissipative pressed, homogeneous vinyl floor covering available in tile and sheet form.

3. INTRODUCTION_  Static Dissipative flooring is essential for protecting sensitive equipment from static charge  It is ideal for use in hi-tech applications such as computer rooms, electronics and telecommunication areas, operating theatres, radiology and the like  Primo SD is a non-directional, static dissipative pressed, homogeneous vinyl floor covering available in tile and sheet form  The tiles are suitable for use in raised access areas Primo SD Vinyl Tiles & Sheeting Primo SD is a non-directional, static dissipative pressed, homogeneous vinyl floor covering available in tile and sheet form.

4. BENEFITS_  Phthalate-free technology  Easy maintenance  Low VOC  100% recyclable  26% recycled content  9 colours with matching welding rods Primo SD Vinyl Tiles & Sheeting Primo SD is a non-directional, static dissipative pressed, homogeneous vinyl floor covering available in tile and sheet form.

5. SUGGESTED SPECIFICATION_TILES Supply and fix 2.0mm thick x 610mm x 610mm Primo SD non-directional static dissipative vinyl tiles, manufactured in accordance with EN 649 and laid over an earthed grid of aluminium tape in FloorworX No.27 acrylic conductive adhesive which has been spread using a trowel fitted with an A2 notched blade at a rate of between 5.5m2 and 6.5m2 per litre on a previously prepared Class 1 sub-floor in accordance with SANS 10070, using FloorworX Self Leveller when required, including all cutting and waste The sheeting must be rolled in both directions with an articulated 68kg three-sectional roller immediately after it has been laid into the adhesive After completing the installation the floor must be electrically tested for resistivity in accordance with the requirements of SANS 6160 Primo SD Vinyl Tiles & Sheeting Primo SD is a non-directional, static dissipative pressed, homogeneous vinyl floor covering available in tile and sheet form.

6. SUGGESTED SPECIFICATION_SHEETING Supply and fix 2.0mm thick x 2.0m wide Primo SD non-directional static dissipative vinyl sheeting, manufactured in accordance with EN 649 and laid over an earthed grid of aluminium tape in FloorworX No.27 acrylic conductive adhesive which has been spread using a trowel fitted with an A2 notched blade at a rate of between 5.5m2 and 6.5m2 per litre on a previously prepared Class 1 sub-floor in accordance with SANS 10070, using FloorworX Self Leveller when required, including all cutting and waste The sheeting must be rolled in both directions with an articulated 68kg three-sectional roller immediately after it has been laid into the adhesive Joins must be butted, grooved and heat welded using the manufacturer’s welding rod, ensuring that the welding rod bonds to more than 70% of the sheet thickness After completing the installation the floor must be electrically tested for resistivity in accordance with the requirements of SANS 6160 Primo SD Vinyl Tiles & Sheeting Primo SD is a non-directional, static dissipative pressed, homogeneous vinyl floor covering available in tile and sheet form.

7. WARRANTY_ FloorworX offers a 5 year limited warranty, subject to our terms and conditions, against defective material provided that it is installed and maintained in accordance with our recommendations Primo SD Vinyl Tiles & Sheeting Primo SD is a non-directional, static dissipative pressed, homogeneous vinyl floor covering available in tile and sheet form.

8. INSTALLATION INSTRUCTIONS_  Primo SD should be installed in accordance with manufacturer’s recommendations  Training Centre is available for installation training to installers SUB-FLOOR_  Sub-floors must be smooth, hard, clean, and dry before laying commences  The final appearance and durability of any resilient flooring installation depends largely on the condition of the surface upon which it is laid  A good sub-floor is vital in achieving a satisfactory adhesive bond and long-term durability  Uneven, solid or suspended timber floors may need preparation to meet the required standard Primo SD Vinyl Tiles & Sheeting Primo SD is a non-directional, static dissipative pressed, homogeneous vinyl floor covering available in tile and sheet form.

9. SUB-FLOOR_  All sub-floors must be tested for moisture content prior to installation  To prevent problems associated with rising damp - it is essential that a damp- proof membrane be incorporated beneath the sub-floor  The South African Standard Building Regulations require that all sub-floors in contact with the ground are so constructed as to be damp-proof  Water is an integral part of the construction of a sub-floor - the amount of water used depends on the type of sub-floor, the required structural strength and the extent of curing  It is impossible to state a time period after which a sub-floor may be considered dry enough upon which to lay flooring - factors such as ambient temperature, relative humidity, thickness of the slab, type of finish required and methods used to cure the concrete, will affect this period  There are various methods of testing the moisture content within the sub-floor, which includes the use of a Hygrometer – the most practical and accurate instrument Primo SD Vinyl Tiles & Sheeting Primo SD is a non-directional, static dissipative pressed, homogeneous vinyl floor covering available in tile and sheet form.

10. CLIMATIZATION_ Primo SD must be allowed to relax for 24 hours in a uniform room temperature between 18°C and 27°C prior to installation ADHESIVE_  The recommended adhesive for Primo SD is FloorworX No. 27 conductive acrylic adhesive  Adhesive to be spread using a trowel fitted with an A2 notched blade at a rate of between 5.5m2 and 6.5m2 per litre POST INSTALLATION_  It is essential that during the course of installation the material be rolled in both directions with an articulated 68kg three section metal floor roller Primo SD Vinyl Tiles & Sheeting Primo SD is a non-directional, static dissipative pressed, homogeneous vinyl floor covering available in tile and sheet form.

11. MAINTENANCE_PREVENTIVE CARE  Approximately 80% of the dirt and soiling that has to be cleaned off a floor has been trafficked in from outside the building. More than 90% of that soiling can be avoided by the use of an effective entrance matting system  When less dirt is trafficked through the entrance there will be a reduction in maintenance requirements.  Regular cleaning is more cost-effective and hygienic than occasional heavy duty cleaning  Wipe up any grease and oil spills immediately and treat stains as soon as they are observed  Black rubber wheels and rubber furniture feet can discolour the floorcovering - hard plastic is preferred  Always follow the manufacturer’s dosage instructions regarding the use of cleaning chemicals Primo SD Vinyl Tiles & Sheeting Primo SD is a non-directional, static dissipative pressed, homogeneous vinyl floor covering available in tile and sheet form.

12. MAINTENANCE_POST INSTALLATION SITE CLEAN  Floor maintenance begins immediately after the completion of installation  The initial step is to remove any loose dirt or debris using a dry mop, broom or vacuum  Sand, construction debris and sharp-edged objects may result in irreparable damage being inflicted to the new floor.  Remove any visible adhesive residue using a damp cloth, once the adhesive has cured it will be difficult to remove  If other trades are working in the building after the installation of the flooring, the floor must be protected from subsequent damage by the use of thick paper, cardboard or hard board.  No wet maintenance must take place until 72 hours (3 days) have elapsed from the time of installation - this is to ensure that the adhesive has sufficient time to cure properly and develop full bond strength Primo SD Vinyl Tiles & Sheeting Primo SD is a non-directional, static dissipative pressed, homogeneous vinyl floor covering available in tile and sheet form.

13. MAINTENANCE_INITIAL CLEAN  Dust mop or vacuum the floor to remove loose soil and dust  Scrub the floor using a solution of FloorworX Maintain diluted 1:10 with clean water, with a rotary machine fitted with a blue pad  Remove the residue immediately after scrubbing using a wet/dry vacuum  Rinse with clean water using a flat mop and allow the floor to dry  Dry buff the floor using a rotary machine fitted with a white pad Primo SD Vinyl Tiles & Sheeting Primo SD is a non-directional, static dissipative pressed, homogeneous vinyl floor covering available in tile and sheet form.

14. MAINTENANCE_REGULAR CLEANING  Dust mop with flat mop or vacuum on a daily basis to remove dust and loose dirt  Treat spills, spots and stains immediately  Spot clean by hand with a red or white pad and a diluted solution of FloorworX Maintain, working from the outside of the mark to its centre  Dry buff periodically. The frequency of dry buffing is dependent on the amount of foot traffic and the effectiveness of the daily cleaning regime  Do not apply any sealers or polishes to the floor as they will have a negative Primo SD Vinyl Tiles & Sheeting Primo SD is a non-directional, static dissipative pressed, homogeneous vinyl floor covering available in tile and sheet form.

15. MAINTENANCE_OCCASIONAL MAINTENANCE  Scrub the floor using a solution of FloorworX Maintain diluted 1:10 with clean water, with a rotary machine fitted with a blue pad  Remove the residue immediately after scrubbing using a wet/dry vacuum  Rinse with clean water using a flat mop and allow the floor to dry  Dry buff the floor using a rotary machine fitted with a white pad Primo SD Vinyl Tiles & Sheeting Primo SD is a non-directional, static dissipative pressed, homogeneous vinyl floor covering available in tile and sheet form.

16. TECHNICAL PROPERTIES_ Primo SD Vinyl Tiles & Sheeting Primo SD is a non-directional, static dissipative pressed, homogeneous vinyl floor covering available in tile and sheet form.

17. TECHNICAL PROPERTIES_ Primo SD Vinyl Tiles & Sheeting Primo SD is a non-directional, static dissipative pressed, homogeneous vinyl floor covering available in tile and sheet form.

18. Please feel free to visit our newly revamped website at www.floorworx.co.zawww.floorworx.co.za Read our Blog on our website at http://www.floorworx.co.za/category/blog/http://www.floorworx.co.za/category/blog/ Subscribe to our Newsletter by mailing your request to info@floorworx.co.zainfo@floorworx.co.za Follow us on Facebook, Twitter, YouTube & Pinterest END OF PRESENTATION_