1. 6.2 Two slit interference Coherence Two-Slit Interference Thin film Interference

2. Interference Effects Interference is a general property of waves. A condition for interference is that the wave source is coherent. Interference between two waves gives characteristic interference patterns due to constructive and destructive interference.

3. Coherence For two waves to show interference they must have coherence. Two waves are coherent if one wave has a constant phase relation to the other coherent incoherent phase shift

4. Coherence Light from two separate light bulbs is Incoherent Light from a single light bulb passing through two slits is coherent

5. Interference  =0 Sum Constructive Interference

6. Interference == Destructive Interference

7. Interference  = Constructive Interference

8. path difference path difference =  =r 2 – r 1 In phase Condition for constructive interference Condition for destructive interference m = 0 + 1, + 2,…. r1r1 r2r2 Superposition of waves at A shows interference due to path differences A Order number m

9. Interference pattern of water waves Constructive Destructive

10. Interference pattern due to two spherical waves Coherent waves Interference pattern Amplitude on screen  =0  =  =- m=0 m=1 m=-1

11. Young’s two slit experiment Thomas Young Does light show wave properties?

12. Path difference from the two slits path difference In the limit L>>d, the rays are nearly parallel

13. Interference pattern Bright constructive interference Dark destructive interference m = 0, + 1, + 2,............ d  m=0 m=1 m= -1 maxima m= -2 m=2 Central maximum

14. Question Light from a laser is passed through two slits a distance of 0.10 mm apart and is hits a screen 5 m away. The separation between the central maximum and the first bright interference fringe is 2.6 cm. Find the wavelength lf the light. for m= 1 dsin  =m sin  ~ for small angles solve for L y d 

15. Clicker Question 1 In a two slit interference experiment, how does the separation between peaks in the interference pattern change if the distance between slits is increased? A.Increase B.Decrease C.Stays the same D.Indeterminate

16. Clicker Question 2 In a two slit interference experiment how does the distance between the peaks on the screen change if the wavelength of the light is increased? A.increases B.decreases C.stays the same D.indeterminate

17. Thin film interference In thin film interference the phase difference is due to reflection at either side of a thin film of transparent material. The phase difference is due to two factors: –Path difference through the film (corrected for the change in speed of light in the material) –Phase shift due to reflection at the interface

18. Phase shift due to reflection n 1 < n 2 phase shift=180 o Reflection with inversion phase shift = 180 o

19. Phase shift due to reflection Reflection without inversion Phase shift = zero n 1 > n 2 Phase shift = zero

20. Thin film Interference For a thin film in air the phase difference due to reflection is 180 o Condition for constructive interference  =2t= The wavelength in the film is longer than in air.

21. Thin film Interference For film in air the phase difference due to reflection is 180 o Condition for destructive interference  =2t= The wavelength in the film is longer than in air.

22. Soap film interference pattern

23. Soap film

24. Question A vertical soap film displays a series of colored band due to reflected light. Find the thickness of the film at the position of the 5 th green band ( =550 nm, n =1.33) Constructive Interference The 5th band has m=4 (the first is m=0)

25. Anti-reflective Coating Anti-reflective coatings are used to reduce reflections at the air-glass interface. anti-reflective coating no coating

26. Anti-reflective Coating Anti-reflective coatings consists of a thin-layer of material with a refractive index in between that of air and glass. Destructive interference between light reflected at the two surfaces reduces the intensity of reflected light. n 1 =1.00 < n 2 < n3n3 Condition for destructive interference. t n1n1 n2n2 n3n3 phase shift of 180 o at both interfaces. Total phase difference due to reflection is zero

27. Question An anti-reflective coating of MgF 2 (n=1.38) is used on a glass surface to reduce reflections. Find the minimum thickness of the coating that can be used for green light ( =550 nm). For destructive interference Quarter wavelength (in coating) thickness minimum at m=0 Solve for t

28. Optical compact disc Cd store information in a series of pits and bumps in the plastic. The information is read by a reflected laser beam. The intensity of the beam is changed by constructive or destructive interference destructive interference