1. QuickWalls® strong. fast. simple. *Light Weight *Insulated
*Load Bearing
*Pre-Fabricated
*Tilt Up
*House Wall Panels
*Assembling Both Inner & Outer Walls in 1 Go
Replace image with a “real “ full size image of our wall panel…later when pallet unloaded

2. Replace Timber Frames, Bricks, Hebal Panel, Foam Cladding Products with our Prefabricated Walls ready for a rendered finish on the exterior face & painting on the interior surface We Supply and Install Quick Walls starting at $180 p.sm. All we need is a finished concrete floor slab PLUS windows & internal wall frames on site . Assuming a single storey villa unit at 150 s.qm. (Plans & Engineering attached). 5 days later you have your dwelling at lock up stage with external walls ready for render finish. Quick Walls will deliver a faster build than Hebal Panel which is fixed vertically to horizontal top hats, attached to the load bearing wall frame . OUR PRODUCTS ADVANTAGE -- NO TIMBER FRAME

3. TECHINICAL DATA Meets relevant Australian building standards
Panels are strong enough to build multiple storeys with little additional framing except around openings and point loads
Tested for axial, transverse and racking strength - tested as superior to conventional framing assemblies
Sound Transmission integrity - reduces outside noise penetrating living environment
Thermal Rating R 4.75

4. TECHINICAL DATA How QuickWalls ® are made:
Panels consist of inner and outer walls
Inclusive of insulation made of a fire retardant Polystyrene core
Sandwiched between two structural grade Magnesia cement board facings
To engineering tolerances
In a local factory environment
Assembled into wall sections
Complete with services within walls
External finish:
Apply coating, cladding, stone etc. directly to wall panel
Internal finish:
As per plaster board, once flushed joined – paint directly over wall panels
Electrical:
Factory fitted conduits running vertically at 300mm centres within EPS foam core
APPENDIX. REPLACED WITH TECHNICAL DATA

5. TECHINICAL DATA Panel facings:
E- Mox brand structural construction grade Magnesia based Sorel board
Thickness 12 mm
Density 950 kg/m3
Features formed tapered edges
Panel core:
Polystyrene sections
Thickness 140 mm
Expanded fire retardant polystyrene
Finished panels:
Thickness 165 mm
Weight ≈ 80 Kilograms / panel
Height 2440 / 2745 / 3050 mm
Width 1200 mm: