1. Beamline Readiness Review - Hutch Beamline 12.3.2 Microdiffraction March 28, 2006

2. Floor Plan, Sector 12 25L760C

3. Sector 12 superbend beamlines 12.2.2, 12.3.1 & 12.3.2

4. Hutch Assembly Details

5. Hutch construction drawing from vendor

6. Wall panel construction 2mm sheet lead 1” thick - 4# mineral wool insulation 14 gauge steel Prior to assembly, interior materials have combined thickness of 52.8mm

7. After assembly, the interior components have been compressed to 47.6mm from 52.8mm Wall panel construction

8. Wall panel connection detail

9. Typical Wall Panel with Pb sheet installed

10. Panel with second layer of insulation installed

11. Front wall prior to second layer of insulation Window

12. 2 nd front wall panel with opening for 12.3.2 beampipe

13. Typical wall corner with Pb bent along vertical edge

14. Different corner with 2 nd layer of insulation

15. H- channel with Pb captured Pb

16. Pb visible in all of these H-channel units

17. bottom side

18. Pb Framed opening detail – labyrinths, beampipe opening

20. Labyrinth Pb detail prior to insulation Pb in track prior to steel cap

21. Labyrinth detail

22. Labyrinths after Pb shielding applied

23. Labyrinth with detail of how Pb is doubled over

24. Overview of back wall construction

25. 1” overlap from Backwall to flashing Roof to back wall connection detail

26. Back wall Pb overlap detail

27. Fastening tabs to secure to structural brace Pb overlap Back wall right side

28. Back wall detail Lead laminated to steel Steel

29. Back wall detail 2 Lead overlap for next panel

30. Roof – Wall panel connection