1. NETGEAR CONFIDENTIAL FVS318v3 Cable/DSL ProSafe VPN Firewall with 8-port switch

2. NETGEAR CONFIDENTIAL Gift Box

3. NETGEAR CONFIDENTIAL Features 8 simultaneous VPN tunnels. 8 10/100 LAN ports. 10 base-T WAN port. Up to 168 bit 3DES encryption. With v2.4 firmware –Configuration Assistant –VPN Wizard

4. NETGEAR CONFIDENTIAL V1, V2, V3? Serial number prefix –V1 – FVS9 –V2 – FVS1 –V3 – FVS8 There are no external difference between model. It is not possible to order one particular version. No upgrade between hardware version is available. Firmware of FVS318v3 is not compatible to FVS318v1 and v2. Firmware of FVS318 v1 and v2 is not compatible to FVS318v3.

5. NETGEAR CONFIDENTIAL FVS318v3 The FVS318v3 uses a much improved, more powerful CPU. Faster routing and VPN throughput. VPN authentication using X.509 certificates. Remote Management using HTTPS. Firewall rules for inbound and outbound traffic

6. NETGEAR CONFIDENTIAL When will the v3 be available? The FVS318 will start being shipped in late Dec 2004. However, it may take up to late Feb 2005 for it to reach customer since we still have inventory of the v1/v2. There are several known issues with the FVS318v3 when it is released initially. A bug fix release will be available before the product reach customer. Make sure customer upgrade to the new firmware.

7. NETGEAR CONFIDENTIAL Connecting the FVS318

8. NETGEAR CONFIDENTIAL LED Power: The power light should turn solid green. Test: The test light blinks when the router is first turned on then goes off. Internet: The internet port light should be lit. If not, make sure the Ethernet cable is securely attached to the firewall Internet port and the modem, and the modem is power on. LAN: A LAN light should be lit. Green indicates our computer is communicating at 100 Mbps, amber indicates 10 Mbps. If a LAN light not lit, check that the Ethernet cable from the computer to the router is securely attached at both ends, and that the computer is turned on.

9. NETGEAR CONFIDENTIAL GUI

10. NETGEAR CONFIDENTIAL Configuration Assistant Automatically bring up wizard when user start browser. Guide user to configure internet connection. Automatically detect PPPoE, static IP or dynamic IP from ISP. No longer need to use http://192.168.0.1 to access the administrator interface.http://192.168.0.1 Support and documentation links on GUI menu. Click Cancel during configuration assistant will bring up the Basic Settings page. (New in v3)

11. NETGEAR CONFIDENTIAL Configuration Assistant - Start

12. NETGEAR CONFIDENTIAL Configuration Assistant - Quit

13. NETGEAR CONFIDENTIAL Configuration Assistant - Testing

14. NETGEAR CONFIDENTIAL Configuration Assistant - Detected

15. NETGEAR CONFIDENTIAL Configuration Assistant – Dynamic IP (DNS)

16. NETGEAR CONFIDENTIAL Configuration Assistant - Update

17. NETGEAR CONFIDENTIAL Configuration Assistant - Success

18. NETGEAR CONFIDENTIAL Configuration Assistant – Done

19. NETGEAR CONFIDENTIAL Configuration Assistant – No connection

20. NETGEAR CONFIDENTIAL Configuration Assistant - PPPoE

21. NETGEAR CONFIDENTIAL Configuration Assistant - PPPoE

22. NETGEAR CONFIDENTIAL Configuration Assistant - PPPoE

23. NETGEAR CONFIDENTIAL Configuration Assistant - PPPoE

24. NETGEAR CONFIDENTIAL FAQ – Configuration Assistant If user choose to quit Configuration Assistant, the Basic Settings page will come up. If default home page is blank, configuration assistant won’t come up when start browser. The configuration assistant will only come up if the router is in factory default state. If configuration assistant won’t come up, it can be access from: –http://www.routerlogin.comhttp://www.routerlogin.com –http://www.routerlogin.nethttp://www.routerlogin.net –http://192.168.0.1http://192.168.0.1

25. NETGEAR CONFIDENTIAL VPN – Box to Box Scenario: Box to Box

26. NETGEAR CONFIDENTIAL VPN Wizard – Box to Box 1

27. NETGEAR CONFIDENTIAL VPN Wizard – box to box 2

28. NETGEAR CONFIDENTIAL VPN Wizard – box to box 3

29. NETGEAR CONFIDENTIAL VPN Wizard – box to box 4

30. NETGEAR CONFIDENTIAL VPN Wizard – box to box 5

31. NETGEAR CONFIDENTIAL VPN Wizard – box to box 6

32. NETGEAR CONFIDENTIAL VPN Wizard – box to box 7

33. NETGEAR CONFIDENTIAL VPN Wizard – box to box 8

34. NETGEAR CONFIDENTIAL VPN – Client to Box Scenario: Client to Box

35. NETGEAR CONFIDENTIAL VPN Wizard – Client to Box 1

36. NETGEAR CONFIDENTIAL VPN Wizard – Client to Box 2

37. NETGEAR CONFIDENTIAL VPN Wizard – Client to Box 3

38. NETGEAR CONFIDENTIAL VPN Wizard – Client to Box 4

39. NETGEAR CONFIDENTIAL VPN Wizard – Client to Box 2B

40. NETGEAR CONFIDENTIAL VPN Wizard – Client to Box 3B

41. NETGEAR CONFIDENTIAL VPN Wizard – Client to Box 4B

42. NETGEAR CONFIDENTIAL Basic Setting - Broadband

43. NETGEAR CONFIDENTIAL Basic Setting – Broadband with Login

44. NETGEAR CONFIDENTIAL Security - Log

45. NETGEAR CONFIDENTIAL Security - Block Site

46. NETGEAR CONFIDENTIAL Security – Block Site

47. NETGEAR CONFIDENTIAL Security – Block Site

48. NETGEAR CONFIDENTIAL Security - Rules

49. NETGEAR CONFIDENTIAL Security – Add rule

50. NETGEAR CONFIDENTIAL Security – Add Services

51. NETGEAR CONFIDENTIAL Security - Schedule

52. NETGEAR CONFIDENTIAL Security - Email

53. NETGEAR CONFIDENTIAL VPN – IKE Policy

54. NETGEAR CONFIDENTIAL VPN – VPN Policy

55. NETGEAR CONFIDENTIAL VPN - CAs

56. NETGEAR CONFIDENTIAL VPN - Certificates

57. NETGEAR CONFIDENTIAL VPN - CRL

58. NETGEAR CONFIDENTIAL VPN – VPN Status

59. NETGEAR CONFIDENTIAL Maintenance - Router Status

60. NETGEAR CONFIDENTIAL Router Status – WAN status and Statistics

61. NETGEAR CONFIDENTIAL Maintenance - Attached Devices

62. NETGEAR CONFIDENTIAL Maintenance - Settings Backup

63. NETGEAR CONFIDENTIAL Maintenance - Set Password

64. NETGEAR CONFIDENTIAL Maintenance - Diagnostics

65. NETGEAR CONFIDENTIAL Maintenance - Router Upgrade

66. NETGEAR CONFIDENTIAL Advanced - Dynamic DNS

67. NETGEAR CONFIDENTIAL Advanced - LAN IP Setup

68. NETGEAR CONFIDENTIAL Advanced - Remote Management

69. NETGEAR CONFIDENTIAL Advanced - Static Routes

70. NETGEAR CONFIDENTIAL Web Support -

71. NETGEAR CONFIDENTIAL Troubleshooting

72. NETGEAR CONFIDENTIAL Known Issues When manage the router through remote management, the interface is slow. Cannot add VPN client policy when one is active. LAN PC cannot ping WAN IP address. When WAN IP 192.168.0.1, can’t route.

73. NETGEAR CONFIDENTIAL VPN Troubleshooting Can the other VPN end point reach you? –What is the remote VPN endpoint? FQDN: resolve to remote WAN IP? IP Address: Is IP address reachable? 0.0.0.0: VPN uses aggressive mode? Do the VPN parameters matches on both endpoints? –What are the remote/local IKE identities? Do they match the remote endpoint’s local/remote IKE identities? –What are the local/remote VPN networks? Do they match remote endpoint’s remote/local VPN networks? –What is the pre-shared key? Does it match the remote endpoint’s pre-shared key? –What are the encryption/authentication algorithms? Do they match the remote endpoint’s algorithms? –What is the IKE mode (main/aggressive)? Does it match the remote endpoint’s IKE mode?

74. NETGEAR CONFIDENTIAL VPN Troubleshooting Flow

75. NETGEAR CONFIDENTIAL CTS

76. NETGEAR CONFIDENTIAL CTS Codes: Problems Hardware Missing Part Power Supply Software

77. NETGEAR CONFIDENTIAL CTS Codes – Causes - Hardware Can not print (Print server) Can not print (Print server) Dead on arrival Dead on arrival Device keep rebooting itself Device keep rebooting itself LED – intermittent flashing LED – intermittent flashing LED – no lights/no power LED – no lights/no power Missing Accessories Missing Accessories Missing Documentation Missing Documentation Missing Power Supply Missing Power Supply No Connection to Modem (no light) No Connection to Modem (no light) Non-Netgear Product Non-Netgear Product Published feature not working Published feature not working Unit Dead-No Power Unit Dead-No Power Wireless Signal – no signal Wireless Signal – no signal Wireless Signal - weak Wireless Signal - weak

78. NETGEAR CONFIDENTIAL CTS Code – Causes – Missing Parts Accessory Power supply

79. NETGEAR CONFIDENTIAL CTS Codes – Causes - Software Advanced Feature Request Application – AOL Optimized 9.0 does not work Application – Can not play online game Application – Can not set up application server Application – Can not use messaging services Cannot build VPN tunnel (box-box) Cannot build VPN tunnel (passthrough) Cannot connect to internel Cannot connect to ISP with PPTP connection Cannot display secure web pages Cannot get to AP/Router Cannot send/receive emails. Cannot use VPN Client (client-box) Crash/Lock Up Device not detected Dial on-demand not working Documentation incorrect Failed Outbound FTP Upload Firmware – failure after update Firmware request ISP parameter incorrect Modem direct connect does not work Router hangs connection Setting lost on device reboot Slow internet Connection Wireless icon – not in SysTray Wireless icon red

80. NETGEAR CONFIDENTIAL CTS Codes - Resolutions Adjusted Antenna Admin – Configured ISP – PPPoA Admin – Configured ISP – PPPoE Admin – Configured ISP – static detected Admin – Provided password Admin – Ran Smart Wizard Admin – Set Port Forwarding Attached to Existing Issue Changed MTU setting Checked/Replaced LAN cable Checked/Replaced power cable Checked/Replaced WAN cable Configured for LAN Configured for Other hardware Connect hub between PC and router Customer not willing to troubleshoot Device tested OK – ISP Problem Disable SPI Disabled/Removed Software Firewall Disconnected/Reconnected Driver – Updated/installed Drivers Firmware – Sent firmware/software Firmware install – latest version Firmware install – previous version Incompatible Connect hub between PC and router Customer not willing to troubleshoot Device tested OK – ISP Problem Disable SPI Disabled/Removed Software Firewall Disconnected/Reconnected Driver – Updated/installed Drivers Firmware – Sent firmware/software Firmware install – latest version Firmware install – previous version Incompatible Non Netgear Issue – ie ISP Problem Non-Netgear issue – customer error Physical installation of device Power cycle Modem/AP/Router/PC Proxy server added Reconfigured device settings – Incorrect settings Refer – Premium Support – accepted/referral Refer – Premium Support – DECLINED Refer – to KB Refer – UNSUPPORTED – to 3 rd party vendor Release/renewed DHCP IP Reset to factory default RMA – DENIED – as outside warranty conditions RMA – DENIED – due to Power Outage RMA – Failure after firmware upgrade RMA – logged completed unit RMA – logged power supply Service Contract Utility – Configured Printer Server Admin Utility – Configured wireless utility Utility – installed wireless utility VPN – configured OTHER client (client-box) VPN – configured Safenet Remote (client-box) VPN – configured setup (box-box) VPN – configured setup (pass through) VPN – configured Win2K (box-box)

81. NETGEAR CONFIDENTIAL Practice Questions

82. NETGEAR CONFIDENTIAL Question 1: 1. Fill out VPN parameters according to the network data

83. NETGEAR CONFIDENTIAL Questions and Answers