1. Legend for [SeismoZoom] and PhasePick in (Array Network Magnitude) Cursor above [seismogram] = set phase or beam window or Max Cursor above [empty left] = erase phase or Max Cursor above [station code] = set marker to: LMB or RMB Pc or Sc P/Pn or S/Sn onset 1. or 2. Max L or R-DBCK Pg or Lg (if regional) LMB or RMB P or S-beam start L or R-DBCK P or S-beam end Cursor above [calib text] = change gain LMB/RMB increase / decrease Arrow keys: ,  shift marker to next trace shift Max up/down ,  shift marked phase one sample ,  shift marker to next phase Character input:.. affecting all traces: c/f common/fixed scaling on/offu undo last phase pick s sonogram underlay on/off y sync to dt of array n normal-gain plot on/off a autosnap of phases on/off.. affecting active trace, last S-P circle: l/r set to local/regionalp polarity flip.. affecting [EpiMap] and [EpiZoom]: b,g beams, S-P circles on/offh,d hyperbola, S-P circle on/off NetworkMode ArrayMode DWM 3comp MagnitudeMode Legend for [SeismoPlot] Cursor above [seismogram] = set window: LMB/RMB set Left/Right of [SeismoZoom] Cursor above [station code] = like Arrow keys: ,  shift Start time of [SeismoZoom] ,  decrease/increase [SeismoZoom] Character input:.. affecting parameter choices, i.e., all plots: 1,2,4,8 resample by factor.. affecting sonogram = set seismogram length: b broadband (6.5 octave = 16k samp) t timeres (5.5 octave = 8k samp) p phasepick (4.5 octave = 4k samp).. overwriting [SeismoZoom]: s Sonogram plot on/off Select Position in Data File, Choose Reference Cursor above [StationButton] = select active trace / phase by marker: LMB/RMB P,Pn or S,Sn onset Cursor above [|SubnetButton|] = LRMB choose subnet Cursor above [DataBox] or [TimeAxis] = LRMB set Start time of [SeismoPlot] NB: length by [b,t,p] and [1,2,4,8] Arrow keys above [DataBox] or [TimeAxis]: ,  large shift, keep scale, erase onsets ,  small shift of Start time [SeismoPlot] Character input: 1,2,4,8,b,t,p like [SeismoPlot] Legend for [Filter] Cursor above [bar] / [axis] = set trace / all: LMB/RMB set Lower/Upper frequency Arrow keys (set BP by character input [1-f] first): ,  shift BP to next lower/upper Character input:.. affecting all traces: 1 [1-2 Hz] 8 [ 8-10 Hz] d [20-24 Hz] 2 [2-4 Hz] a [10-12 Hz] e [24-28 Hz] 4 [4-6 Hz] b [12-16 Hz] f [28-32 Hz] 6 [6-8 Hz] c [16-20 Hz].. selecting filter bank: n normal p P-beam s S-beam SeismoPlot SeismoZoom EpiMap EpiZoom, P-Beam, Mag-Calif. Filter DepthProfile, S-Beam, Magnitude Legend for [EpiMap] Cursor above [map] = adjust [EpiZoom]: LMB set upper left corner = position RMB set lower right corner = size Cursor outside [map] or above [scale]: LMB/RMB increase / decrease resolution Arrow keys: , , ,  shift [EpiZoom] Character input: p,n patchmap (without stations) on/off c,m [EpiZoom] center to SHYPO/ME z,u zoom/unzoom size of [EpiZoom] l,h list/hide multiple protocol entries Legend for [EpiZoom] & Position of SHYPO Cursor above/out [map] = adjust/erase SHYPO: LMB/RMB take P,Pn or S,Sn as reference Arrow keys: , , ,  shift SHYPO ,  shift depth of SHYPO ,  shift origin time of SHYPO Legend for [P, S-Beam] & Position of SBEAM LRMB above/outside [map] = adjust/erase SBEAM: Arrow keys: , , ,  shift SBEAM ,  shift origin time of SHYPO Character input = select slowness range: t teleseismic [0-0.2 s/km] n near [0-1.5 s/km] r regional [0-0.4 s/km] a acoustic[0-4.0 s/km] l local [0-0.7 s/km] s shallow [0-8.0 s/km] Info per Frame f1 Legend f2 Parameter List automove  detection list syncmove  life SonoDet sync protmove  HypoLine protocol bullmove  external bulletin Legend for [Magnitude] Cursor above/outside [map] = set/erase magnitude: LRMB set to default value Arrow keys: ,  shift dist range {10m.., 100m.., 3km..} ,  shift magnitude Legend for [DepthProfile] LRMB above [map] = set depth of hypolines/SHYPO Arrow keys: ,  / ,  shift depth for hypolines/SHYPO ,  change max. displayed depth.. only for interactive profiles (half-space/one-layer) ,  change velocity of half-space/1. layer ,  change velocity of vS / 2. layer ,  change depth of 1. layer Character input: l / 1-n list all / select specific layer model p reset vP/vS to Poisson ratio (toggle) Legend for global options affecting MasterEvent and protocol selection 0 disable 1-9 select ,  adjust time pg+ next entry w write l list ,  adjust ampl pg- last entry

2. Menu-ToolbarStationBar TimebarFilter EpiMap EpiZoom SeismoZoom Depth/Magnitude SeismoPlot