1. XAS 375 JD6 Compressors Scott Malm
Committed to sustainable productivity.

2. Product Data - XAS 375 JD6

3. Settings/Shutdowns - XAS 375 JD6

4. AIR SYSTEM INLET VALVE Spring loaded in the open position
Control Air closes the inlet
Also serves as check valve

5. No Load/ Starting Load Load solenoid Load solenoid Regulating valve
Min Press valve
Min Press valve
Unloading valve
Unloading valve

6. Unload Blow Down Unloading valve Regulating valve Unloading valve
Min Press valve
Load solenoid
Min Press valve
Load solenoid

7. No Load/Starting
Load

8. Unload
Blow Down

9. REGULATING SYSTEM REG VALVE
Spring loaded
Adjusting receiver pressure
by changing spring tension
to pressure gauge and loading valve
to speed regulator
to unloading valve
Regulating pressure:
Receiver pressure
In order to regulate the pressure inside the reciever tank of our compressor, the air intake and the engine speed have to be controlled. This is done pneumatically. For that reason, we need regulating pressure. The regulating valve reduces the pressure inside the tank, thus providing the regulating pressure. This regulating pressure is then supplied to the unloader valve and the speed regulator or RPS.
The air receiver pressure can be set to another value by adjusting the spring tension of the regulating valve. This is done by turning the handle on top the valve. Increasing the spring tension, by turning in, will increase the regulating pressure and consequently the pressure inside the vessel. Turning out will decrease the pressure.

10. AIR SYSTEM MIN PRESS VALVE
Maintains a minimum pressure
of 58 PSI for oil flow
Also contains the final check
valve

11. Control Panel

12. Load Solenoid Valve –

13. Maintenance – XAS 375 JD6

14. XC 2002 Controllers

15. XC2002 Controller - XAS 375 JD

16. XC2002 Control Module Display Fuel Level Engine Coolant Temperature
Engine Oil Pressure
Engine RPM
Battery Voltage
Service Timers
Engine Inlet Air Temperature
Fuel Consumption (L/H)
Engine Fuel Temperature
Regulating Pressure
Log List – Will Hold last 30 Historic Codes
Alarm List – Shows Active Alarms Only
Parameters – Choose Another Language, Reset Service Timers, Change Measuring Units, etc…

17. Control Module –

18. XC2002 Controller
John Deere codes will display here

19. XC2002 Controller

20. XC2002 Controller

21. XC2002 Controller – * Unit Type 2

22. J1939 Canbus Communication

23. J1939 Canbus Communication . Cont…

24. John Deere Engine Fault Code List

25. John Deere Engine Fault Code List

26. John Deere Engine Fault Code List

27. John Deere Engine Fault Code List

28. John Deere Engine Fault Code List

29. John Deere Engine Fault Code List

30. John Deere Engine Fault Code List

31. John Deere Engine Fault Code List

32. John Deere Engine Fault Code List

33. Displaying of J1939 DM1 Alarms

34. Electrical System

35. Legend

36. Detailed Electrical Diagram

37. John Deere – Tier III – RPS in place of Pneumatic Speed Regulator
Regulating Pressure Sensor
“Speed Sensor”

38. *Preheat Relay K1 Controlled by JDEC
Starter Relay

39. K1 – Preheat Relay – JDEC Warning

40. Troubleshooting - Information

41. Troubleshooting - Information

42. Troubleshooting - Information

43. Preventive Maintenance Filter Kits – XAS 375 JD6

44. Preventive Maintenance Filter Kits – XAS 375 CD6

45. Spare Parts Recommendation

46. Committed to sustainable productivity.