Presentation is loading. Please wait.

Presentation is loading. Please wait.

IDCS 100 Cabinet construction based on existing Compact 2 3 Expansion slots in main cabinet 2 types of types of expansion cabinet –Expn A –Expn B.

Similar presentations


Presentation on theme: "IDCS 100 Cabinet construction based on existing Compact 2 3 Expansion slots in main cabinet 2 types of types of expansion cabinet –Expn A –Expn B."— Presentation transcript:

1 iDCS 100 Cabinet construction based on existing Compact 2 3 Expansion slots in main cabinet 2 types of types of expansion cabinet –Expn A –Expn B

2 System Structure PSU Ringer 2SLI MEM MISC Universal Slots DCS slot  6 Universal slots  6 x 8 ch slots  1 slot for TEPRI or SVMi-8  32 ch slot Main CabinetExpansion Cabinet

3 Basic Cabinet PSU Ringer 2SLI MEM MISC Slots for expansion cards  Expanded memory size from 2MB to 3MB  Support both existing cards and new cards (Backward Compatibility)

4 Power Supply Unit PSU  110V/220V Free Voltage  Accommodate up to 48 KTS  40 KTS when using the SVMi-8

5 Expansion Cabinet A Slots for CII & iDCS100 cards  Highway channel relocation First 3 Slots support 8 port cards Last Slot(4 th ) supports 32 port cards – PRI, TEPRI or SVMi-8  Support both existing cards and new cards (Backward Compatibility) Slot for DCS card

6 Expansion Cabinet B Slots for CII & iDCS100 cards  Highway channel relocation First 2 Slots support 8 port cards Slot 3 for SVMi-8 Last Slot(4 th ) supports 32 port cards – PRI or TEPRI  Support both existing cards and new cards (Backward Compatibility) Slot for DCS card

7 Memory Cards MEM 4 Flash memory w/ LAN MEM 3 3MB EPROM YES 19.2K YES NO 9.6KNO VoIPTEPRIQ-SIGLAN SIO LAN SIO MISC S/W Upload Windows PCMMC  Memory Card - Two Options:  MEM 3 (EPROM) - 3MB  MEM 4 (flash memory) - 8 MB plus LAN and SIO interface

8 TEPRI Card TEPRITEPRI  Same card with iDCS 500  TEPRI card required for  networking features (Q-SIG)  Plus MEM4  TEPRI card must be placed on the last (4 th ) slot  Available to use existing PRI

9 ITM3ITM3 VoIP Board iDCS 100 Sized Card  New ITM3 card for iDCS 100  H.323 V3  8 Channels maximum Minimize

10 System Capacities Total Capacity - approximately 100 ports Extensions Digital - 48 max Analogue - 48 max OPX – 2 PSTN trunks – 36 BRI - 24 channels PRI - 30 channels VoIP - 8 channels

11 System Capacities Auto Attendant - 4 channels –12 levels –ACD group comfort messages I/O ports –2 serial on MISC card –LAN 10/100 base T plus extra I/O port- MEM 4 Card required –Internal Modem for remote system access Voicemail –SVMi-4 (Flash memory) - 4 ports –SVMi-8 (HDD) - 8 ports takes up last slot in Expansion cabinet

12 System Capacities DECT –3 Base Stations –24 Handsets Miscellaneous –MOH 1 internal, 2 External, Voicemail –Internal Paging - 4 groups –External Paging - 4 groups –Common Bell –Alarm Contact

13 Motherboard 8 Digital keyphone Interfaces [2B + D] 1 External MOH port 1 Internal MOH source 1 Paging Port 3 Universal Slots Provision for PLL board Provision for Ringer Module

14 Interface Cards 2 SLI Memory Board Misc. 1 Card Misc. 2 Card Modem Card PLL

15 Interface Cards 3 TRK - loop start + 2 PFT 6 TRK - loop start + 2 PFT 8 DLI [1B + D] 8 SLI AA Card

16 Interface Cards PRI TEPRI 2 BRI 4 BRI ITM3 AC 15

17 Misc. 1 card Additional 4 DTMF receiver/senders 2 x RS232 ports (3 ports with MEM4) Additional BGM port Additional Page port 3 Common purpose relays provision for modem card

18 Misc. 2 card As per the Miscellaneous 1 Plus a 4 port AA

19 Keyphone Daughter Boards KDB-DLI for extra keyphone KDB-SLI for extra SLI Can only be fitted to keyphone on Motherboard Don’t install with keyphone “live”

20 iDCS 100 Installation P1 for connections on motherboard

21 iDCS 100 Installation P2 for connections on the 3 expansion slots

22 iDCS 100 Installation Ringer Unit required for any SLI extensions

23 iDCS 100 Installation PLL card required for any ISDN card

24 iDCS 100 Installation 2 cct SLI card

25 iDCS 100 Installation MISC slot for either MISC 1 or 2

26 iDCS 100 Installation MEM slot for either MEM3 or MEM4

27 iDCS 100 Installation 3 expansion slots for DLI card, SLI card, BRI card etc

28 iDCS 100 Installation Connection leads to main cab

29 iDCS 100 Installation Earth lead

30 iDCS 100 Installation Illustration of connected expn cabinet DON’T FORGET THE SCREWS

31 iDCS 100 Installation P5 for connections on 3 expansion cards

32 Doorphone Interface Module DPIM can be fitted to all systems Connects to DLI port

33 24 Button Display Keyphone

34 12 Button Display Keyphone

35 6 Button Display Keyphone

36 6 Button Basic Keyphone

37 DS 2100B

38 48 Button AOM

39 The End


Download ppt "IDCS 100 Cabinet construction based on existing Compact 2 3 Expansion slots in main cabinet 2 types of types of expansion cabinet –Expn A –Expn B."

Similar presentations


Ads by Google