1. Booster Pump/ Compressor Procedures Rescue 31 Operator Instructions

2. Open fill station door

3. Put cylinder into receiving slot

4. Attach fill valve to bottle

5. Close bleeder valve

6. Open fill valve

7. Open bottle

8. Close fill station door completely, allowing locking slide to fully drop

9. Open supply valve

10. Increase regulator pressure to desired level warning! during shut down procedures, regulator pressure should be brought down to 0 psi to reduce pressure on internal spring and diaphram

11. Open “booster valve” to gain more regulated pressure

12. Open “fill valve”

13. Allow bottle to be filled until booster has stopped creating pressure

14. Shut down procedures Close fill valve Close booster valve Decrease regulator pressure down to 0 psi Close supply valve Open fill station door Close bottle Close fill valve Open bleeder Replace fill valve into storage slot Remove bottle Close fill station door

15. Filling more than one bottle To fill more than one bottle more efficiently, you may skip shut down procedures and just open fill station door. This will automatically inhibit unit to function until another bottle is connected and fill station door is securely closed.