1. The specification states that you need to be able to: The specification states that you need to be able to: Define and explain the following terms: Define and explain the following terms: Porosity Porosity Permeability Permeability hydrostatic pressure hydrostatic pressure hydraulic gradient hydraulic gradient Aquifers Aquifers water table. water table.

2. Water Program on the Network. I suggest that you work through one of the programs on the College network which is about geological resources and pay attention to the part on water. I suggest that you work through one of the programs on the College network which is about geological resources and pay attention to the part on water. You can find it by: You can find it by: Log on to the college network as normal. Log on to the college network as normal. Click on start. Click on start. Click on Programs. Click on Programs. Click on Course Content Click on Course Content Click on Geology Click on Geology Click on Earth Science Courseware Click on Earth Science Courseware Click on Aspects of Earth Resources Click on Aspects of Earth Resources Click on 1. Water Click on 1. Water Then work your way through the program. Then work your way through the program.

3. Porosity and Permeability  What is meant by the terms porosity and permeability? Porosity: Amount of pore space between grains: Porosity: Amount of pore space between grains: Porosity = Volume of pore space x 100% Total volume of rock Total volume of rock

4. Porosity and Permeability 2 Factors influencing porosity: Grain shape Grain shape Packing Packing Amount of cement and smaller grains between grains. Amount of cement and smaller grains between grains. Sedimentary rocks have a greater porosity as a rule than igneous and metamorphic rocks that are made of interlocking crystals. Sedimentary rocks have a greater porosity as a rule than igneous and metamorphic rocks that are made of interlocking crystals. Some examples: Some examples: Limestone10% Limestone10% Sandstone18% Sandstone18% Shale18% Shale18% Clay45% Clay45% Sand35% Sand35% Gravel25% Gravel25% Granite1% Granite1% Basalt1% Basalt1%

5. Permeability: Definition: The ability of a liquid to pass through a rock. Definition: The ability of a liquid to pass through a rock. Permeable = water can pass through, varies from high to low. Permeable = water can pass through, varies from high to low. Impermeable = Cannot pass through. Impermeable = Cannot pass through. The larger the pore spaces the more permeable the rock will be especially if the pore spaces are well connected. The larger the pore spaces the more permeable the rock will be especially if the pore spaces are well connected. A moderately porous rock may not necessarily be permeable, as the pore spaces may not be connected. A moderately porous rock may not necessarily be permeable, as the pore spaces may not be connected. E. g. shale has a porosity of 18% similar to sandstone but clay minerals hold onto the water and so it is impermeable. E. g. shale has a porosity of 18% similar to sandstone but clay minerals hold onto the water and so it is impermeable.

6. Post Depositional Changes: These can affect porosity and permeability: These can affect porosity and permeability: 1. Faulting (increase) 2. Jointing (increase) 3. Cementation (decrease) 4. Metamorphism will crystallise the rock and reduce the porosity.

7. Hydrostatic Pressure Normal water pressure exerted at any point in a water body at rest.” This increases with depth. This increases with depth.

8. Hydraulic Gradient Forms when areas of low and high hydrostatic pressure are connected e.g. within an artesian well. Forms when areas of low and high hydrostatic pressure are connected e.g. within an artesian well. The water in the high-pressure zone will flow towards the low- pressure zone (at the surface). The water in the high-pressure zone will flow towards the low- pressure zone (at the surface). In artesian systems the well is dug into the aquifer below the water table. In artesian systems the well is dug into the aquifer below the water table. This creates a strong hydraulic gradient and water keeps flowing. This creates a strong hydraulic gradient and water keeps flowing. This will become clear when we have covered artesian basins. This will become clear when we have covered artesian basins.

9. Aquifers The water table tends to follow the surface topography. The water table tends to follow the surface topography. Water Table: Surface of the saturated groundwater zone. Water Table: Surface of the saturated groundwater zone. If it happens to occupy a position above land then water seeps out forming lakes, marshes that fill until they reach the water table level. If it happens to occupy a position above land then water seeps out forming lakes, marshes that fill until they reach the water table level. Where a steep surface and the water table meet then springs will occur. Where a steep surface and the water table meet then springs will occur. This is particularly common in limestone, which are porous and can dissolve in water forming cave systems. This is particularly common in limestone, which are porous and can dissolve in water forming cave systems. Springs will occur where the permeable aquifer meets an impermeable rock below. Springs will occur where the permeable aquifer meets an impermeable rock below.

10. Aquifers 2 There are different types of aquifer: There are different types of aquifer: Confined aquifers: This is an aquifer between 2 impermeable rocks. Confined aquifers: This is an aquifer between 2 impermeable rocks. The 2 sandwiching rocks are called aquicludes. The 2 sandwiching rocks are called aquicludes. Unconfined aquifers: Not covered by impermeable rock. Unconfined aquifers: Not covered by impermeable rock. Water table level may vary depending on the season. Water table level may vary depending on the season.

11. Aquifers 3 Perched aquifers: Smaller aquifers that hold amounts of water higher than the regional water table e.g. valley sides.  These can often lead to the formation of springs. Water can be extracted from these aquifers in a number of ways:

12. WELLS These are dug or drilled down into an unconfined aquifer and must extend below the water table. These are dug or drilled down into an unconfined aquifer and must extend below the water table. The water is either pumped out mechanically or drawn out by hand. The water is either pumped out mechanically or drawn out by hand. The main problem is that over time if used excessively output may exceed the main meteoric input and water table level can drop locally. The main problem is that over time if used excessively output may exceed the main meteoric input and water table level can drop locally.

13. ARTESIAN WELLS A well is dug or drilled into a confined aquifer. A well is dug or drilled into a confined aquifer. This time no pumping is needed as water in the aquifer is under considerable pressure. This time no pumping is needed as water in the aquifer is under considerable pressure. The well acts like a pressure release valve and water flows out under it’s own pressure. The well acts like a pressure release valve and water flows out under it’s own pressure. E. g. the Great Australian Artesian basin in Queensland. E. g. the Great Australian Artesian basin in Queensland.

14. Artesian Wells 2 In artesian systems the well is dug into the aquifer below the water table. In artesian systems the well is dug into the aquifer below the water table. This creates a strong hydraulic gradient and water keeps flowing. This creates a strong hydraulic gradient and water keeps flowing. When the aquifer is folded producing a broad synform then an artesian basin is formed e.g. the Australian basin covers 1.5 million km 2. When the aquifer is folded producing a broad synform then an artesian basin is formed e.g. the Australian basin covers 1.5 million km 2. Water is picked up in the mountains in the east and the water slowly moves through the rock west towards an arid region, where wells up to 1.5 km deep. Water is picked up in the mountains in the east and the water slowly moves through the rock west towards an arid region, where wells up to 1.5 km deep.