1. Multiview Drawings

2. Multiview Drawing A multiview drawing is one that shows two or more two-dimensional views of a three- dimensional object. Multiview drawings provide the shape description of an object. When combined with dimensions, multiview drawings serve as the main form of communication between designers and manufacturers.

3. Multiview Drawing

4. Width, Depth, and Height All three-dimensional objects have width, height, and depth. Width is associated with an object’s side- to-side dimension. Height is the measure of an object from top-to-bottom. Depth is associated with front-to-back distance.

5. Width, Depth, and Height Width / Side View Depth / Top View Height / Front View

6. 45 ° Width, Depth, and Height

7. Orthographic projection is a technique that is used to create multiview drawings. Orthographic projection is any projection of the features of an object onto an imaginary plane of projection. The projection of the features of the object is made by lines of sight that are perpendicular to the plane of projection. Orthographic Projection

8. The best way to understand orthographic projection is to imagine an object contained inside a glass box. Orthographic Projection

9. There is a total of six glass walls surrounding the object. Each wall represents a projection plane onto which a two- dimensional object view will be created. Orthographic Projection

10. A projection plane, also referred to as a plane of projection or picture plane, is an imaginary surface that exists between the viewer and the object. The projection plane is the surface onto which a two-dimensional view of a three- dimensional object is projected and created. Projection Plane

11. Start by focusing only on the front projection plane. A person standing in front of the object would see only the five corners identified in black. 1 2 3 4 5 line of sight at 90° angle to projection plane Orthographic Projection

12. Projection lines are used to project each corner outward until they reach the projection plane. Orthographic Projection

13. A projection line is an imaginary line that is used to locate or project the corners, edges, and features of a three-dimensional object onto an imaginary two-dimensional surface. Projection Lines

14. The visible edges of the object are then identified on the projection plane by connecting the projected corners with object lines. Orthographic Projection

15. The orthographic projection process is then repeated on the other projection planes. Orthographic Projection

16. Sketching a Multiview Drawing Given the overall dimensions of the object, a pencil, and a sheet of graph paper, sketching a multiview drawing can be easily done using points, construction lines, and object lines.

17. Sketching a Multiview Drawing Step #1:Calculate the amount of space that the views will take up. Can you draw them full size or will you need to use a smaller “scale”?

18. Divide your paper into four equal sections Label them as shown: TOP FRONT SIDE 3D

19. Object Line Layout

20. A Question… Each of the blocks at right has the same overall dimensions and color. What else do they have in common?

21. Answer: Each of the blocks at right has the same overall dimensions and color. What else do they have in common? They all have identical top views!

23. Use one of the available objects. Find the TOP, SIDE, and FRONT views (width, height, and depth). Use a ruler to measure the width, side, and front of the object. Measure in INCHES. Draw all three views of the object on graph paper. If you can draw the object actual size, do so, or reduce the measurements if necessary. Include dimension lines – and dimensions - for each view. See next slide for an example.

24. Example

25. Lastly: Sketch a 3D view of the object in one corner of your graph paper. Like this: PUT YOUR NAME ON IT AND TURN INTO THE BASKET! When finished:

26. Choose a different object to draw. Do an orthographic drawing of this object. This time use metrics (mm) to measure it. TURN INTO THE BASKET!