1. Chapter 9 “Chemical Names and Formulas” H2OH2O

2. Section 9.1 Naming Ions

3. Atoms and Ions l Atoms are electrically neutral. –Because there is the same number of protons (+) and electrons (-). l Ions are atoms, or groups of atoms, with a charge (positive or negative) –They have different numbers of protons and electrons. l Only electrons can move, and ions are made by gaining or losing electrons.

4. An Anion is… l A negative ion. l Has gained electrons. l Nonmetals can gain electrons. l Charge is written as a superscript on the right. F 1- Has gained one electron (-ide is new ending = fluoride) O 2- Gained two electrons (oxide)

5. A Cation is… l A positive ion. l Formed by losing electrons. l More protons than electrons. l Metals can lose electrons K 1+ Has lost one electron (no name change for positive ions) Ca 2+ Has lost two electrons

6. Predicting Ionic Charges Group 1A: Lose 1 electron to form 1+ ions H1+H1+H1+H1+ Li 1+ Na 1+ K1+K1+K1+K1+ Rb 1+

7. Predicting Ionic Charges Group 2A: Loses 2 electrons to form 2+ ions Be 2+ Mg 2+ Ca 2+ Sr 2+ Ba 2+

8. Predicting Ionic Charges Group 3A: Loses 3 Loses 3 electrons to form 3+ ions B 3+ Al 3+ Ga 3+

9. Predicting Ionic Charges Group 4A: Do they lose 4 electrons or gain 4 electrons? Do they lose 4 electrons or gain 4 electrons? Neither! Group 4A elements rarely form ions (they tend to share)

10. Predicting Ionic Charges Group 5A: Gains 3 Gains 3 electrons to form 3- ions N 3- P 3- As 3- Nitride Phosphide Arsenide

11. Predicting Ionic Charges Group 6A: Gains 2 Gains 2 electrons to form 2- ions O 2- S 2- Se 2- Oxide Sulfide Selenide

12. Predicting Ionic Charges Group 7A: Gains 1 electron to form Gains 1 electron to form 1- ions F 1- Cl 1- Br 1- Fluoride Chloride Bromide I 1- Iodide

13. Predicting Ionic Charges Group 8A: Stable noble gases do not form ions! Stable noble gases do not form ions!

14. Predicting Ionic Charges Group B elements: Many transition elements Many transition elements have more than one possible oxidation state. have more than one possible oxidation state. Iron (II) = Fe 2+ Iron (III) = Fe 3+ Note the use of Roman numerals to show charges

15. Naming cations l Two methods can clarify when more than one charge is possible: 1)Stock system – uses roman numerals in parenthesis to indicate the numerical value 2)Classical method – uses root word with suffixes (-ous, -ic) Does not give true value

16. Naming cations l We will use the Stock system. l Cation - if the charge is always the same (like in the Group A metals) just write the name of the metal. l Transition metals can have more than one type of charge. –Indicate their charge as a roman numeral in parenthesis after the name of the metal (Table 9.2, p.255)

17. Predicting Ionic Charges Some of the post-transition elements also Some of the post-transition elements also have more than one possible oxidation state. have more than one possible oxidation state. Tin (II) = Sn 2+ Lead (II) = Pb 2+ Tin (IV) = Sn 4+ Lead (IV) = Pb 4+

18. Predicting Ionic Charges Group B elements: Some transition elements Some transition elements have only one possible oxidation state, such as these three: have only one possible oxidation state, such as these three: Zinc = Zn 2+ Silver = Ag 1+ Cadmium = Cd 2+

19. Exceptions: l Some of the transition metals have only one ionic charge: –Do not need to use roman numerals for these: –Silver is always 1+ (Ag 1+ ) –Cadmium and Zinc are always 2+ (Cd 2+ and Zn 2+ )

20. Practice by naming these: l Na 1+ l Ca 2+ l Al 3+ l Fe 3+ l Fe 2+ l Pb 2+ l Li 1+ l Sodium ion l Calcium ion l Aluminum ion l Iron (III) ion l Iron (II) ion l Lead (II) ion l Lithium ion

21. Write symbols for these: l Potassium ion l Magnesium ion l Copper (II) ion l Chromium (VI) ion l Barium ion l Mercury (II) ion lK+lK+ l Mg 2+ l Cu 2+ l Cr 4+ l Br + l Hg +2

22. Naming Anions l Anions are always the same charge l Change the monatomic element ending to – ide l F 1- a Fluorine atom will become a Fluoride ion.

23. Practice by naming these: l Cl 1- l N 3- l Br 1- l O 2- l Ga 3+ l Chloride ion l Nitride ion l Bromide ion l Oxide ion l Gallide ion

24. Write symbols for these: l Sulfide ion l Iodide ion l Phosphide ion l Strontium ion

25. Polyatomic ions are… l Groups of atoms that stay together and have an overall charge, and one name. l Usually end in –ate or -ite l Acetate: C 2 H 3 O 2 1- l Nitrate: NO 3 1- l Nitrite: NO 2 1- l Permanganate: MnO 4 1- l Hydroxide: OH 1- and Cyanide: CN 1- ?

26. l Sulfate: SO 4 2- l Sulfite: SO 3 2- l Carbonate: CO 3 2- l Chromate: CrO 4 2- l Dichromate: Cr 2 O 7 2- l Phosphate: PO 4 3- l Phosphite: PO 3 3- l Ammonium: NH 4 1+ Know Table 9.3 on page 257 If the polyatomic ion begins with H, then combine the word hydrogen with the other polyatomic ion present: H 1+ + CO 3 2- → HCO 3 1- hydrogen + carbonate → hydrogen carbonate ion (One of the few positive polyatomic ions)

27. Section 9.2 Naming and Writing Formulas for Ionic Compounds

28. Writing Ionic Compound Formulas Example: Barium nitrate (note the 2 word name) 1. Write the formulas for the cation and anion, including CHARGES! Ba 2+ NO 3 - 2. Check to see if charges are balanced. 3. Balance charges, if necessary, using subscripts. Use parentheses if you need more than one of a polyatomic ion. Use the criss-cross method to balance subscripts. Not balanced! ( ) 2 Now balanced. = Ba(NO 3 ) 2

29. Writing Ionic Compound Formulas Example: Ammonium sulfate (note the 2 word name) 1. Write the formulas for the cation and anion, including CHARGES! NH 4 + SO 4 2- 2. Check to see if charges are balanced. 3. Balance charges, if necessary, using subscripts. Use parentheses if you need more than one of a polyatomic ion. Use the criss-cross method to balance the subscripts. Not balanced! ( ) 2 Now balanced. = (NH 4 ) 2 SO 4

30. Writing Ionic Compound Formulas Example: Iron (III) chloride (note the 2 word name) 1. Write the formulas for the cation and anion, including CHARGES! Fe 3+ Cl - 2. Check to see if charges are balanced. 3. Balance charges, if necessary, using subscripts. Use parentheses if you need more than one of a polyatomic ion. Use the criss-cross method to balance the subscripts. Not balanced! 3 Now balanced. = FeCl 3

31. Writing Ionic Compound Formulas Example: Aluminum sulfide (note the 2 word name) 1. Write the formulas for the cation and anion, including CHARGES! Al 3+ S 2- 2. Check to see if charges are balanced. 3. Balance charges, if necessary, using subscripts. Use parentheses if you need more than one of a polyatomic ion. Use the criss-cross method to balance the subscripts. Not balanced! 23 Now balanced. = Al 2 S 3

32. Writing Ionic Compound Formulas Example: Magnesium carbonate (note the 2 word name) 1. Write the formulas for the cation and anion, including CHARGES! Mg 2+ CO 3 2- 2. Check to see if charges are balanced. They are balanced! = MgCO 3

33. Writing Ionic Compound Formulas Example: Zinc hydroxide (note the 2 word name) 1. Write the formulas for the cation and anion, including CHARGES! Zn 2+ OH - 2. Check to see if charges are balanced. 3. Balance charges, if necessary, using subscripts. Use parentheses if you need more than one of a polyatomic ion. Use the criss-cross method to balance the subscripts. Not balanced! ( ) 2 Now balanced. = Zn(OH) 2

34. Writing Ionic Compound Formulas Example: Aluminum phosphate (note the 2 word name) 1. Write the formulas for the cation and anion, including CHARGES! Al 3+ PO 4 3- 2. Check to see if charges are balanced. They ARE balanced! = AlPO 4

35. Naming Ionic Compounds l 1. Name the cation first, then anion l 2. Monatomic cation = name of the element Ca 2+ = calcium ion l 3. Monatomic anion = root + -ide Cl  = chloride CaCl 2 = calcium chloride

36. Naming Ionic Compounds l some metals can form more than one charge (usually the transition metals) l use a Roman numeral in their name: PbCl 2 – use the anion to find the charge on the cation (chloride is always 1-) Pb 2+ is the lead (II) cation PbCl 2 = lead (II) chloride (Metals with multiple oxidation states)

37. Things to look for: 1) If cations have ( ), the number in parenthesis is their charge. 2) If anions end in -ide they are probably off the periodic table (Monoatomic) 3) If anion ends in -ate or –ite, then it is polyatomic

38. Practice by writing the formula or name as required… l Iron (II) Phosphate l Stannous Fluoride l Potassium Sulfide l Ammonium Chromate l MgSO 4 l FeCl 3

39. l Fe +3 P 3 l Sn +2 F 2 l K 2 S l (NH 4 ) 2 CrO 4 l Magnesium Sulfate l Iron (III) Chloride

40. Section 9.3 Naming and Writing Formulas for Molecular Compounds

41. Molecular compounds are… l made of just nonmetals l smallest piece is a molecule l can’t be held together by opposite charge attraction l can’t use charges to figure out how many of each atom (there are no charges present)

42. Molecular compounds are easier! l Ionic compounds use charges to determine how many of each. –You have to figure out charges. –May need to criss-cross numbers. l Molecular compounds: the name tells you the number of atoms. –Uses prefixes to tell you the exact number of each element present!

43. Prefixes (Table 9.4, p.269) l 1 = mono- l 2 = di- l 3 = tri- l 4 = tetra- l 5 = penta- l 6 = hexa- l 7 = hepta- l 8 = octa-

44. Prefixes l 9 = nona- l 10 = deca- l To write the name, write two words: Prefix & name Prefix & name-ide

45. Prefixes l 9 = nona- l 10 = deca- l To write the name, write two words: l One exception is we don’t write mono if there is only one of the first element. PrefixnamePrefixname-ide

46. Prefixes l 9 = nona- l 10 = deca- l To write the name, write two words: l One exception is we don’t write mono if there is only one of the first element. l Normally, we do not have double vowels when writing names (oa oo) PrefixnamePrefixname-ide

47. Practice by naming these: lN2OlN2O l NO 2 l Cl 2 O 7 l CBr 4 l CO 2 l BaCl 2 (This one will not use prefixes, since it is an ionic compound!) = dinitrogen monoxide (also called nitrous oxide or laughing gas) = nitrogen dioxide = dichlorine heptoxide = carbon tetrabromide = carbon dioxide

48. Write formulas for these: l diphosphorus pentoxide l tetraiodine nonoxide l sulfur hexafluoride l nitrogen trioxide l carbon tetrahydride l phosphorus trifluoride l aluminum chloride (Ionic compound)

49. Section 9.5 The Laws Governing Formulas and Names

50. Some Laws: l 1. Law of Definite Proportions- in a sample of a chemical compound, the masses of the elements are always in the same proportions. l H 2 O (water) and H 2 O 2 (hydrogen peroxide)

51. Some Laws: l 2. Law of Multiple Proportions- Dalton stated that whenever two elements form more than one compound, the different masses of one element that combine with the same mass of the other element are in the ratio of small whole numbers.

52. Same mass of oxygen - Page 275

53. Summary of Naming and Formula Writing l For naming, follow the flowchart- Figure 9.20, page 277 l For writing formulas, follow the flowchart from Figure 9.22, page 278

54. Helpful to remember... 1. In an ionic compound, the net ionic charge is zero (criss-cross method) 2. An -ide ending generally indicates a binary compound 3. An -ite or -ate ending means there is a polyatomic ion that has oxygen 4. Prefixes generally mean molecular; they show the number of each atom

55. Helpful to remember... 5. A Roman numeral after the name of a cation is the ionic charge of the cation l Use the handout sheets provided by your teacher!