1. Interference and Diffraction

2. Certain phenomena require the light (the electromagnetic radiation)
to be treated as waves.
Two relevant examples are:
interference and diffraction

3. Plane Electromagnetic Waves
E(x, t) = EP sin (kx-t)
B(x, t) = BP sin (kx-t) ˆ z j x Ey Bz c
Waves are in phase,
but fields oriented at 900
Speed of wave is c
At all times E = c B

4. Plane Electromagnetic Waves
E and B are perpendicular
to each other, and to the
direction of propagation
of the wave.
The direction of propagation
is given by the right hand
rule: Curl the fingers from E
to B, then the thumb points
in the direction of propagation.
Electromagnetic waves
propagate in vacuum
with speed c, the speed
of light.

5. Combination of Waves + =
In general, when we combine two waves to form a composite wave,
the composite wave is the algebraic sum of the two original waves,
point by point in space [Superposition Principle].
When we add the two waves we need to take into account their:
Direction
Amplitude
Phase + =

6. The combining of two waves to form a composite wave is called:
Combination of Waves
The combining of two waves to form a composite wave is called:
Interference + =
Constructive interference
(Waves almost in phase)
The interference is constructive
if the waves reinforce each other.

7. The combining of two waves to form a composite wave is called:
Combination of Waves
The combining of two waves to form a composite wave is called:
Interference + =
(Close to p out of phase)
(Waves almost cancel.)
Destructive interference
The interference is destructive
if the waves tend to cancel each other.

8. Interference of Waves + + = Constructive interference = (Waves cancel)
(In phase) + =
( p out of phase)
(Waves cancel)
Destructive interference 20 20 10

9. * Interference of Waves + = When light waves travel different paths,
and are then recombined, they interfere.
Mirror 1 2 *
Each wave has an electric field whose amplitude goes like:
E(s,t) = E0 sin(ks-t) î
Here s measures the distance
traveled along each wave’s path. + =
Constructive interference results when light paths differ
by an integer multiple of the wavelength: s = m  20 20 11

10. * Interference of Waves + = When light waves travel different paths,
and are then recombined, they interfere.
Mirror 1 2 *
Each wave has an electric field whose amplitude goes like:
E(s,t) = E0 sin(ks-t) î
Here s measures the distance
traveled along each wave’s path. + =
Destructive interference results when light paths differ
by an odd multiple of a half wavelength: s = (2m+1) /2

11. Interference of Waves
Coherence: Most light will only have interference for small optical path differences (a few wavelengths), because the phase is not well defined over a long distance. That’s because most light comes in many short bursts strung together.
Incoherent light: (light bulb)
random phase “jumps” 20 20 12

12. Interference of Waves
Coherence: Most light will only have interference for small optical path differences (a few wavelengths), because the phase is not well defined over a long distance. That’s because most light comes in many short bursts strung together.
Incoherent light: (light bulb)
Laser light is an exception: Coherent Light: (laser)
random phase “jumps” 20 20 13

13. Thin Film Interference
We have all seen the effect of colored reflections
from thin oil films, or from soap bubbles.
Film; e.g. oil on water 20 20 14

14. Thin Film Interference
We have all seen the effect of colored reflections
from thin oil films, or from soap bubbles.
Rays reflected off the lower
surface travel a longer
optical path than rays
reflected off upper surface.
Film; e.g. oil on water

15. Thin Film Interference
We have all seen the effect of colored reflections
from thin oil films, or from soap bubbles.
Rays reflected off the lower
surface travel a longer
optical path than rays
reflected off upper surface.
Film; e.g. oil on water
If the optical paths differ by
a multiple of , the reflected
waves add.
If the paths cause a phase difference , reflected waves cancel out. 20 15 20

16. Thin Film Interference
Ray 1 has a phase change of phase of  upon reflection
Ray 2 travels an extra distance 2t (normal incidence approximation) 1 t 2
oil on water
optical film on glass
soap bubble
n = 1
n > 1
Constructive interference: rays 1 and 2 are in phase
 2 t = m n + ½ n  2 n t = (m + ½)  [n = /n]
Destructive interference: rays 1 and 2 are  out of phase
 2 t = m n  2 n t = m  20 16 20

17. Thin Film Interference
When ray 2 is in phase with ray 1, they add up constructively
and we see a bright region.
Different wavelengths will tend to add constructively at different angles, and we see bands of different colors. 1 t 2
oil on water
optical film on glass
soap bubble
n = 1
n > 1
Thin films work with even low
coherence light, as paths are short
When ray 2 is  out of phase, the rays interfere destructively.
This is how anti-reflection coatings work. 20 20 18

18. Diffraction What happens when a planar wavefront
of light interacts with an aperture?
If the aperture is large
compared to the wavelength
this would be expected....
…Light propagating
in a straight path.

19. Diffraction If the aperture is small compared to the wavelength,
would this be expected?
Not really…

20. Diffraction If the aperture is small compared to the wavelength,
would the same straight propagation be expected? … Not really
In fact, what
happens is that:
a spherical wave propagates out
from the aperture.
All waves behave
this way.
This phenomenon of light spreading in a broad pattern,
instead of following a straight path, is called: DIFFRACTION

21. q Diffraction I Angular Spread: q ~ l / a
Slit width = a, wavelength =  q I

22. Huygen’s Principle
Huygen first explained this in 1678 by proposing that all planar wavefronts are made up of lots of spherical wavefronts..

23. Huygen’s Principle
Huygen first explained this in 1678 by proposing that all planar wavefronts are made up of lots of spherical wavefronts..
That is, you see how light propagates
by breaking a wavefront into little
bits

24. Huygen’s Principle
Huygen first explained this in 1678 by proposing that all planar wavefronts are made up of lots of spherical wavefronts..
That is, you see how light propagates
by breaking a wavefront into little
bits, and then draw a spherical wave
emanating outward from each little
bit.

25. Huygen’s Principle
Huygen first explained this in 1678 by proposing that all planar wavefronts are made up of lots of spherical wavefronts..
That is, you see how light propagates
by breaking a wavefront into little
bits, and then draw a spherical wave
emanating outward from each little
bit. You then can find the leading edge
a little later simply by summing all
these little “wavelets”

26. Huygen’s Principle Huygen first explained this in 1678 by proposing
that all planar wavefronts are made up of lots of
spherical wavefronts..
That is, you see how light propagates
by breaking a wavefront into little
bits, and then draw a spherical wave
emanating outward from each little
bit. You then can find the leading edge
a little later simply by summing all
these little “wavelets”
It is possible to explain reflection and refraction this way too.

27. Diffraction at Edges what happens to the shape of the field at this
point?

28. Diffraction at Edges
Light gets diffracted at the edge of an opaque barrier
 there is light in the region obstructed by the barrier I

29. Double-Slit Interference
Because they
spread, these
waves will
eventually
interfere with
one another and
produce
interference
fringes

30. Double-Slit Interference

31. Double-Slit Interference

32. Double-Slit Interference

33. Double-Slit Interference
Bright
fringes

34. Double-Slit Interference
Bright
fringes
screen

35. Double-Slit Interference
screen
Bright
fringes
Thomas Young (1802) used double-slit interference to prove the wave nature of light.

36. Double-Slit Interference
Light from the two slits travels different distances to the screen.
The difference r1 - r2 is very nearly d sinq. When the path
difference is a multiple of the wavelength these add constructively,
and when it’s a half-multiple they cancel. L d y r1 r2 q P

37. Double-Slit Interference
Light from the two slits travels different distances to the screen.
The difference r1 - r2 is very nearly d sin q. When the path
difference is a multiple of the wavelength these add constructively,
and when it’s a half-multiple they cancel.
d sin q = m l  bright fringes
d sin q = ( m+1/2) l  dark fringes L d r1 r2 q P
Now use y = L tan q; and for small y  sin   tan  = y / L y
y bright = mlL/d
y dark = (m+ 1/2)lL/d

38. Multiple Slit Interference
With more than two slits, things get a little more complicated P y d L 26 27

39. Multiple Slit Interference
With more than two slits, things get a little more complicated
Now to get a bright
fringe, many paths
must all be in phase.
The brightest fringes
become narrower but
brighter;
and extra lines show up
between them. P y d L
Such an array of slits is called a “Diffraction Grating” 26 28

40. Multiple Slit Interference
The most intense diffraction lines appear when:
d sin(q) = m l
Note that each wavelength  is diffracted
at a different angle  S q
All of the lines (more intense and less intense) show up at the set of angles given by: d sinq = (n/N) l (N = number of slits). 26 31

41. Single Slit Diffraction
Angular Spread: q ~ l / a I
Intensity
distribution
Each point in the slit acts as a source of spherical wavelets
Slit width a q
For a particular direction q, wavelets will interfere, either constructively or destructively, resulting in the intensity distribution shown.

42. Two points are resolved when the minimum of the second
The Diffraction Limit
Diffraction imposes a fundamental limit
on the resolution of optical systems:
Suppose we want to image 2 distant points,
S1 and S2, through an aperture of width a:
Two points are resolved when
the maximum of one is at
the minimum of the second L
The minima occurs for
sin  =  / a S1 D q
a = slit width S2
Using sin     min =  / a
Dmin / L   / a

43. Example: Double Slit Interference
Light of wavelength l = 500 nm is incident on a double
slit spaced by d = 50 mm. What is the fringe spacing on
the screen, 50 cm away? d
50 cm

44. Example: Double Slit Interference
Light of wavelength l = 500 nm is incident on a double
slit spaced by d = 50 mm. What is the fringe spacing on
the screen, 50 cm away? d
50 cm

45. Example: Single Slit Diffraction
Light of wavelength l = 500 nm is incident on a slit a=50 mm wide. How wide is the intensity distribution on the
screen, 50 cm away? a
50 cm

46. Example: Single Slit Diffraction
Light of wavelength l = 500 nm is incident on a slit a=50 mm wide. How wide is the intensity distribution on the
screen, 50 cm away? a
50 cm
What happens if the slit width is doubled?
The spread gets cut in half.

47. sin   y/L for small angles, and m = 1 for first order
Beams of green ( = 520 nm) and red ( = 650 nm) light
impinge normally on a grating with lines per cm.
What is the separation y of the first order diffracted beams
on a screen, parallel to the grating, and located at a distance
L = 50 cm away from it?
Grating equation  d sin  = m 
sin   y/L for small angles, and m = 1 for first order
10000 lines/cm  d =
d y / L =   y =  L /d
Y green = 520x10-7x50 / = 26 cm
Y red = 650x10-7x50 / = 32.5 cm
y = 6.5 cm