2. VANS GYPLAST
Wall Block Plaster

3. VANS Gyplast can be applied directly in all of above hard surfaces
Types of hard surface
Brick Wall
Cement Block wall
Concrete Wall
VANS Gyplast can be applied directly in all of above hard surfaces

4. Types Of Block Plaster Cement Based Plaster
Made of white cement and dolomite with various additives. Such plasters are heavy by weight and can not meet the requirement of thick application. Also needs putty application of 1 to 2 mm before applying paint.
Gypsum Based Plaster
Made of gypsum and lighter in weight. It gives ready surface for painting but some time it still needs some amount of smoothening plaster for hiding purpose. It all depends upon the skill of plasterer.

5. Introducing

6. Vans Gyplast™
Vans Gyplast is a pure gypsum based plaster suitable for most internal wall & partition surfaces including brick, block and concrete.
It consists essentially of pure gypsum hemihydrate formulated with special additives to control working and setting characteristic.
It contains pure gypsum in natural form also eliminated from all impurities.
It gives plaster an unmatched workability because of its smoothness, coverage and ease of application. It dries to provide super white, smooth and fine finish for painting.

7. OUR USPs Humidity resistant Lightweight Crack free
Vans Gyplast is the only gypsum plaster which is very natural in its form and gives a ultra white and bright finish. It’s smoothness gives great coverage, workability and high productivity to the plasterer. Hence great wall finish with reduced time and cost to the customer. This is how we add value to our customer’s business.
Humidity resistant
Crack free
No powdering
Fungus Free
Fire resistant
Lightweight
Excellent strength on drying
Thermal resistance
Good coverage
Affordable

8. Other Features Can be directly applied, single coat application.
Free from shrinkage and crack and powdering
High coverage up to 92 m2/t
Ultra white and smooth finish
Enhanced light reflection, imparts true colour tone and gloss for paint.
Compatible with any type of paint.
Highly moisture resistant
Hygienic -Does not allow bacteria or fungus getting formed on it.
Available in 25 Kg
Thickness can go up to 32 mm.
6 months Shelf life.

9. n.d. = Less than distinguish limit
Technical Details
Physical Property
Parameters
Dry Bulk Density
Wet Bulk Density
Initial Setting Time
Final Setting Time
Compressive Strengths (24 Hours)
Compressive Strengths (48 Hours
Approx. Coverage*
Units
Kg/m3
1.32 – 1.46 gm/cm3
14-18 Minutes
24-26 Minutes
43.80 kgf/cm2
44.12 kgf/cm2
87-92 m2/t
Chemical Property
Parameters
Silicon dioxide
(SIO2)
Aluminum Oxide ( AI203)
Iron(III) oxide
(Fe203)
Calcium Oxide
(CaO)
Diphosporus Pentoxide
(P205)
Manganese oxide
(Mn0)
Sulfur Trioxide
(So3)
Sodium oxide
(Na2O)
Potassium oxide
(K2O)
Loss On Ignition
(L.O.I)
Units
0.07%
n.d.
38.80%
54.60%
0.01%
5.72%
n.d. = Less than distinguish limit

10. Recommended Application Methodology
Step 1:
The wall surface (Substrate)
to be plastered should be
thoroughly clean with a
brush to be free from all dust
and loose particles. If any
traces of mould oil must be
washed with detergent
water.

11. Recommended Application Methodology
Step 2:
It is recommended to pre
wet the substrate before
application so as to get
the substrate fully
hydrated to achieve
strong adhesion, more
spread and better
coverage.

12. Recommended Application Methodology
Step 3: Measure the surface undulation with plumb thread and fix level mosaic (Tiki) in order to estimate amount of plaster required and spread plaster on the wall to achieve absolutely plain surface with zero undulation.

13. Recommended Application Methodology
Step 4:
Mix Vans Gyplast to water (Not
vise versa), using mixing rod to mix
paste thoroughly to get desired
consistency.
Step 5 :
Water to plaster ratio should be maintained
to have good cohesive workable mix
(1 Part of water : 1 part of plaster by volume). However this ratio can be adjusted by the applicator depending upon site climatic condition.

14. Recommended Application Methodology
Step 6:
Prepare plaster mix as
much as required
depending upon
immediate scope of
work.
# Precaution
once the mix has begun to set,
additional dry material should not be
added, as performance parameters
of plaster will get altered, thus
affecting applicability, consistency,
adhesion & strength.

15. Recommended Application Methodology
Step 7:
Apply mixed plaster on the
substrate with a hand trowel
and level it with aluminium
bottom scale. Avoid using a
wet brush on the finished
surface, as that would leave
permanent brush marks and
spoil the surface.

16. Recommended Application Methodology
Step 8:
single coat should not exceed
12mm in thickness. If at all
thickness required more than
12 mm, plaster should be
applied in multiple coats.

17. Recommended Application Methodology
Step 9:
After the complete drying (which
usually takes 72 hrs dependingon
the thickness and whether
conditions) levelled Vans Gyplast
surface is ready for painting.

18. Safety Instruction Vans Gyplast is absolutely
free from any lime and toxic
elements. In case it comes in
contact with eye or live
wound, needs to be cleaned
with fresh normal water.
Consult your doctor if
irritation continues

19. Product Comparison Chart
 Products Comparision
Direct application
Line & level
Smooth finish
Time saving
Quality assurance
Water curing
Shrinkage cracks
Sand cement Plaster √ –
POP
Does not require
Gypsum Plaster
Do not appear

20. Benefits to Builders Green material
Quality offering to his customer - Shrinkage crack free surfaces - smooth finish
High productivity – faster work (Reducing plastering time by 70% when compared to conventional Sand cement plaster + POP method) so time saving and cost
No water curing required.
Performance – Durability, light weight (Reduces dead load on structure)
Cleaner sites - direct application bagged product

21. Benefits to Applicator
Easy to apply with smooth and consistent paste – Increased efficiency and saves time.
Enhanced coverage – better per day productivity.
Smooth and super white finish – customer appreciation & work satisfaction
100% natural product without any lime content – safe, non hazardous to skin and health.
Also available in Quick setting formulation – efficient workability in cold and moist climatic condition.

22. Benefits to End User No shrinkage cracks on walls and ceilings
Reduction in the time required for plastering and this helps in timely possession of homes
Perfectly lined, leveled, smooth walls
Saving on electricity used for air conditioning as gypsum has very low thermal conductivity

24. TEST CERTIFICATE

26. Packaging
VANS Gyplast is available in
25KG Bag

27. Thanking You !